i have issue copying data from a filtered sheet to another sheet. i only want to copy visible cells....ie when there is no data or data after filtering i have: selection. currentregion.copy. this dosent work as when there is no data it still copies my column headings in row A1 across to row r1 and then to next sheet. how do i write code that will only pick up the filtered data starting in first cell...ie after filtering this could be any number. for example i only want to copy data if row 2 and downwards has data
how I can copy top 15 visible values from a specific column in an autofilter, without actually setting the "top 10" values in the macro for that column. So somehow copy the first 15 cells. The code should fit somehwere in this I guess:
Could I put an extra variable by the .paste so it only pastes 15 values. Perhaps behind the copy??? I've tried to put .Cells(15) but that doesn't work either, which is a pitty. I'm clueless here, and couldn't find anything regarding this (without using fixed ranges, ...)
This code was provided this forum. It is so close to what I need. The only difference is that I need the copied lines inserted.
Actually, I needed Destination to pick EndT2 (on Sheet2), then select one row down from it and then insert what was copied... -R-
Sub CopyFilteredRangeNoHeaders() Dim rTable As Range
Set rTable = Sheet1. AutoFilter.Range
Set rTable = rTable.Resize(rTable.Rows.Count - 1) 'Move new range down to start at the fisrt data row. Set rTable = rTable.Offset(1) rTable.Copy Destination:=Range("EndT2")
I would like to copy a column from a filtered range to notepad. The main steps of this method are these:
1.Copy the original range to a blank range(range1) as text and filter 2.Select the required rows and copy 3.paste the values to A1000 (range2) 4.open notepad and set the filename by a cell value 5.paste the range to notepad 6.delete range1 and range2
Unfortunately, I use macros and vb not so often, so I'm not expert in it. I have found two useful code, but I don't know how can I combine them.
I'm trying to do is copy filtered data. I select my column and copy it, filtered, no problem. But then my code bugs out when it tries to copy the next column.
If Sheets("CT Summary"). Cells(4, 6).Value = "P1264" Then
Sheets("Mam Roll-up").Activate
'Copy CEID's.
Range("L4:L134").Select
Selection.SpecialCells (xlCellTypeVisible)
"Selection.SpecialCells (xlCellTypeVisible)" works in the first block, but bugs out on the second.
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
I need code to copy rows from a filtered list on one worksheet and insert at a specific point in another worksheet.
What I would do if doing it manually is to "select the visible cells, copy, go to the other worksheet, select the point I wanted to insert the data and select Insert Copied Cells".
When I try to record this with the macro recorder I don't see the option Insert Copied Cells.
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data() Dim wb As Workbook, wbDest As Workbook Dim ws As Worksheet, wsDest As Worksheet Dim lngCalc As Long Dim FoundCells As Range Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF") Set wbDest = Workbooks("FY09 PR Log Blank") Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application .ScreenUpdating = False lngCalc = .Calculation .Calculation = xlCalculationManual End With For Each ws In wb.Worksheets.............................
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
I need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
I have the code below which filters and copies columns. My issues is that this filters and copies all data. I would like to filter all this data from another column before running the macro. And for this code to only then filter and copy the already 'manually' filtered data. Does anyone know how I might go about doing this?
Sub sortdescript2() Dim rngData As Range For Each rngData In Range("E4:CR258").Columns rngData.AutoFilter Field:=1, Criteria1:="<>" rngData.Copy rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues rngData.AutoFilter Next
Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I 1 First I filter only Yellow cells 2 then I copy that Filtered cells 3 after that copying that filter cells I did Paste in same rows in J and K column
I need the VB code to copy just a portion of a filtered list. I have completed the code to sort and filter the list. I'm having a problem determining how to define the region needed. I have searched the forums and found a few helpful threads but nothing specific. Most show selecting all the columns of the filtered list.
My list is in columns A:AA and begins in row 4 (header row). In my test data, there are 5,900+ records and filtered list is approximately 4,900 records. Since I have sorted the data, the portion of the filtered data I need will always begin in cell D5, be columns D:K, and be the visible rows.
I have a large worksheet, with approx 15 columns of data, which is a straight data dump from a very old sales reporting system - so the whole thing is a mess.
As such, I auto filter the report, and select certain criteria from various columns, which leaves me with just the data I wish to see on screen.
What I then need to do is copy across any visible values (after this filtering) from Column C (missing out row 1, which is headings), into the same row in Column E.
At the moment, this is a manual process, because if you highlight the entire selection of codes in column C, then paste in Column E, due to the filtering, the paste puts the values in all the wrong places.
Is there a way around this - or a macro which will copy the values to the same row but in Column E?
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria: 1. xyz 2. acb 3. hij
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A") If Cell.Value <> Empty Then i = i + 1 b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b End If Next Cell
I have a spreadsheet with 5000 records and i would like to have a macro that can be able to filter by date and copy it to a new workbook.
i have a data validation that indicates dates and once i have selected a date for example "10/10/2013" and all data with that date will copy and paste as value to a new workbook .
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A row 1 ABCDE row 2 FGHI row 3 Party Name:Abcd row 4 JKLM row 5 nopq row 6 STUV row 7 Party Name:ryz row 8 Party Name:mno row 9 XYZ
I want the results as below:
Column A Column B Column C Column D row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales First I filter the data range for " Total Sales" Paste the results with header row to wsDetails
Details - Details Then filter the data again for "N" I would like to paste these results to wsDetails w/o the header
Option Explicit Sub comp_pl_ytd_Totals() Dim wbBook As Workbook Dim wsData As Worksheet Dim wsTotals As Worksheet Dim wsDetails As Worksheet Dim wsExtract As Worksheet Dim rngData As Range Dim rngCrit As Range Dim rngDest As Range Dim arrCrit Dim myRange As Range Dim C As Range Dim lngrows As Long Dim strFormula As String Dim rngCase As Range With Application . ScreenUpdating = False .DisplayAlerts = False .Calculation = xlCalculationManual End With................
I have data in one column that is the result of a formula, ie: =B2*B3. The result may display a decimal answer that goes out 4 places. My boss likes us to clean this up by using the = ROUND(B4,2). That is fine and easy enough, but the problem is that these numbers maybe spaced throughout a large sheet. I have to filter to make sure similar items are calculated the same way. The problem is that when I copy and paste, it copies and pastes all the data hidden between the displayed cells of the filtered sheet. How do I make it so I am only copying and pasting the data displayed and not the cells that are filtered out in between?
How would I modify the code belwo to insert the copied range above the existing data in the worksheet? (The part giving me the problem is in bold italics.) Also, how would I modify this code so that it only copies the filtered data, NOT including the column headers?
My first worksheet contains the following information:
Column A contains parent category names (e.g. colours) Column B contains lookup values (non-unique) Column C contains value to return
Each subsequent worksheet is for a single parent category (i.e. a sheet per unique category)
I'm unsure how to write some code that will return column C for each worksheet
Example of first worksheet:
A B C
1 Group Item Amount
[code]....
From this, my code creates 4 new sheets named Red, Orange, Blue and Green with column A containing the item numbers that relate to the worksheet name in the table in the first sheet (e.g. column A in sheet Red contains item numbers 1 to 6 inclusive):
A B
1 Item Amount
2 1 x
[code]....
In column B, I could like to return the values in column C from the table in column C that are only specific to that worksheet name.
I think I want to filter column A in the first sheet against the sheet name and then perform a VLOOKUP on the filtered data or would using a dynamic range be better?
I have searched all over and read many solutions for selecting only visible cells and copy pasting them or formatting them by doing Ctrl + G and selecting visible cells only. However the problem is once I select visible cells only, it seems that every time I do Ctrl + C on filtered Range it only selects visible cells. I want a way to toggle this setting in Excel. I'm using Office 2007. For example: if I want to select the entire range, both hidden and visible cells within the selected table array, is there anyway to reverse or toggle the setting that causes Excel to refresh the "visible cells only" setting back to default or all cells?
It would be a much faster way than to remove all filters, select & copy entire range, and then re-apply all filters again.
I have on sheet 1 a table 12 columns, variable rows. I filter this table on two different columns, so that only x rows are visible.
My aim is to move these visible rows to another sheet 2, starting from cell J23., work with these data in other cells of sheet 2, and send them back to sheet 1, adding the date in column 12.
Do I need, sheet viewcode or module ?
Afterwords I would like to link this VBA code to a form button.
my requirement is as follows. I have a school data sheet(data sheet) and i have to filter data based on each school id.I need to pass school id in a different excel sheet(input sheet). So if the school id matches then i have to copy the entire data for tht school and move to to a new sheet.
Input sheet schoolid 211 321
Data Sheet
Emp No Surname last name schoolid 1 marian chin 211 3 luke mar 211 5 uyure tgt d 321 7 fdsfd fdsfsd 333
so whn the macro is run it should filter for 211 and 321 and move these three rows from data sheet to new output sheet.
