How To Divide Range Of Cells By Another Range Of Cells
Sep 27, 2012
I have a range of cells on multiple sheets that I am trying to get an average price per gallon for. For example, I would like to divide I43:I56 by H43:H56. The kicker is that some of the cells are blank, so that throws off my division formula.
Is there a way to make the formula work in one cell? As of now, I am using the SUM function in cell I57 and H57 for each of their respective columns and then using a simple division formula in another cell. I still have the problem, however, on some of the sheets where there is no data entered and I get the dreaded #DIV/0 due to no data being present. Is there a way around this?
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc) Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6) =AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
I have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data I need to paste data of sheet2 start of row106 in sheet1
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells A40 A41 A42 A43
So instead of highlighting a range of cells and naming the range from the Name Box could you enter, for instance, $A$1:$B$25 in a cell, and name it somehow, and make this be the range?
This would be particularly useful for ranges that are continually updated.
I'd prefer to do this without VB and/or a macro, but can use it if absolutely necessary.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
What I want to do is Average out a range of cells "F4:F343". That's the easy part =average(F4:F343). However I want to exclude any numbers for that average if data in coloumn "Q" = "FMC"
Would that look anything like:
=average(F4:F343)/countif(Q4:Q343, "<>FMC")
I'm also displaying it as minutes in a day so i added *24*60 to the end of the formula and formatted to Number/.00. I've entered the formula and it will calculate but when i enter FMC to the appropriate area the average wont change.
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1() Dim r1 As Range, r2 As Range, myMultiAreaRange As Range Worksheets("Pre").Activate Set r1 = Range("J4") Set r2 = Range("K4") Set myMultiAreaRange = Union(r1, r2) myMultiAreaRange.Select Worksheets("Data").Select Range(r1, r2).Select Selection.Copy Sheets("1").Select Range("B5").Select ActiveSheet.Paste End Sub
I am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.
I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.
If I have a value of lets say 53, I need it broken down into equal and whole numbers across the spread sheet with the last one being the remaining value.
Currently for example in cell F5 I have a value of 41 that I need to break down so I have done the following: In Cell P5 =IF(F5>=25,F5-21,F5) Then in Cell Z5 =IF(P5>=25,P5-21,P5) and this goes on until I have zero value from the original value in the last cell can i not do this all in one formula and have the results populate in other cells.
I have just started to try and learn VBA for excel. the resource I have been using are books and the WEB. Some how, not sure how there was/is some code where all enteries in all worksheets are divided by 100, i.e if I enter 2222 after clicking the enter button the result in the cell is 22.22. I have deleted all macros and code however the problem still exist.
I have a workbook with several worksheets in the same format. I would like to have a function to output the sheets that have rows in which collumn A = X AND collumn B = Y.
I've been working on this one for a couple days now and I'm not making much progress.
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
1. I have two workbooks (eg. workbook1 and workbook2) 2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20). 3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
