I have a list of users in Colum N and in the next column each user has to assign a code from a drop down list... that part is ok... In the next column I have a formula that returns a value of 1 if the code has been assigned... =IF(N4="","",1)... This is the bit i am struggling with... i now need the value to be zero if the user name appears within a range called "excludePersons"
View 10 Replies
I have the following code which toggles the value of cells by double clicking on them. I need to exclude certain ranges of cells though. I tried password protecting the sheet, but that haults the code. Is there a way to exclude the cells or exit sub if the targeted cell was in the range of Rows("10:10") or Columns("A:B") for example?
View 2 Replies View RelatedI have a speadsheet where I have a cell that reads a named range via OFFSET. The range consists mainly of numbers but a few cells contain the text UL (Unlimited)
The cell that "reads" the OFFSET is then used in another cell where it is multiplied by either 2 or 3 depending on user input.
The problem occurs where the cell attempts to multiply the text "UL" which results in "#VALUE!"
How can I have this cell with the multiplication bypass the multiplication and simply return the text "UL" in the case of reading text from the named range.
I have a dynamic named range which allows me to have an automatically growing drop down list in B1 as more cities are added in column A. however, my workbook will have N/A errors to begin with before cities are added.
is there a way for my drop down list in B1 not to include the N/A errors and only the cities? of course when the next N/A error turns into a city, i would like the B1 drop down list to recognise this and include it.
is it possible to leave a column out of this sort code as in A the very first column which just numbers the rows?
Here is my sort ....
This is hard for me to articulate, so hopefully someone will understand what I'm trying to do.
I'm attempting to construct a formula in Excel, that basically says: IF the value is between these two numbers, multiple them by this percentage, or if the value is between these numbers, multiple it by this percentage.
So, let's say cell A3 equals 10,000,000, A2 equals 5,000,000 and A1 equals 1,000,000... Also cell B3 equals 10% and B2 equals 5%. We'll say that number X is in cell C1. If the number X is between 10,000,000 & 5,000,000 it should by multiplied by 10%. If number X is between 5,000,000 and 1,000,000 it should be multiplied by 5%.
I've tried a formula similar to: IF(C1 (Rng(A3:A2), C1*B3) ---- Meaning that if the number is between 10,000,000 and 5,000,000, multiple the number by 10%.
I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
I am trying to do a calculation based on the conditions of two cells but one cell I would need the range of the report. Either way, here is my current statement.
=IF(P2:P15 = "Green Building 15",SUM(COUNTIF(C2:C15,"Over AC")+COUNTIF(C2:C15,"Top Lab AC")),0)
I get a Value# error (though it systematicaly works if you check in the funtion area), and its because of the range I am using, is there anyway to bypass thiss issue or can someone give a better calculation.
I have tried over and over to get a point value from the percentages posted below but my formula will not return consistent results. Am I doing something wrong.
94% - below 1 Point
95%-96% 2 Points
97% 3 points
98%-99% 4 Points
0% or 100% 5 Points
Reference Cell is AG2 and is .99 but for some reason I return a 5
=IF(AG2=0,5,IF(AND(AG2>0,AG2<=0.94),1,IF(AND(AG2>=0.95,AG2<=0.96),2,IF(AG2=0.97,3,IF(AND(AG2>=0.98,A G2<=0.99),4,5)))))
I dont know how to nest and if (if that is the right way to go about it). this is what I have ....
View 10 Replies View RelatedNeed all numbers in between the ranges set. So if I input for example 8765 then the cell still comes up with 18.
IF Cell E25 is 0-7200, then 12, If cell E25 is 7201-14400,
then 18, if cell E25 is 14401 - 21600, then 22,
if cell E25 is 21601-28800, then 28, if cell E25 is 28801 - 36000, then 34.
so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
I was making a simple spreadsheet as I'm taking practice tests for some IT certifications and the spreadsheet I was making was to chart out my progress.
I had a range of scores in some cells and one of the formulas I used so that I didnt have errors in the sheet like div/0 went like the following:
=if(b5:b50="","",sum(b5:b50)) this seemed to work really well for the one section, however I tried to get a little fancy as always and I think I messed something up. Beneath that I tried to separate each practice test with the same sort of formula resulting something like the following:
=if(b30:b40="","",sum(b30:b40)) this however just returned an error #value. I dont understand why the first formula worked and the second didnt. Then again, I'm not really an excel guru, back in college I was really good with it but I dont really remember much.
I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
I'm trying to create an IF formula that returns the month as text between a certain date range in a different column.
For example
Between the 25-APR-09 and 23-MAY-09 I want to display "May" 24-MAY-09 and 27-JUNE-09 "June"
And so on so forth, the column with the dates in it is in date format.
I need a formula that will return "true" only if ALL cells in the specified range are not Null (<>""). I'd like to assign a value (% complete) only after all tasks under a phase have been given a completion date.
View 7 Replies View RelatedI have a sheet with thousands of rows and 45 columns and I need to delete a range of cells (G:Y) if the cell in column V = the cell in column X, and I need to do this by row. I think an if/then statement would work.
View 4 Replies View RelatedI'm after a formula that will look at a number of cells(that are not in a range) with the word "C" and if they all = "C" then I want the cell to come back with the result "yes" otherwise "no".
View 12 Replies View RelatedIf C36, C37, C38 or C39 contain a 0 then put 0 if not continue with the the formulae
I have this but I know its not right as this is a sum: =IF(C36:C39=0,0,ROUNDUP((C36/C37)+(C38/C39),0)).
I've created an IF statement with multiple formulas, but I can't seem to
figure out if it is possible to pull the information by a specific date
range. I have sales reps that visit customers on specific dates and I need
my tally sheet to only pull dates within that current week. Does anyone know
if this is possible??
This is what I have so far:
=SUM(IF(sales rep!AB2:AB216=I3,IF(sales rep!$AA$2:$AA$216=I4,IF(sales
rep!P2:P216=I7,IF(sales rep!$N$2:$N$216>=DATEVALUE("3/18/2005"),1,0)))))
If you look above I have it to calculate the date value starting at
03-18-05, but I would like it to only pull that date through the next week.
I am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
I am trying to use cell C6 in my control sheet
Which is this
C:UsersNeilWin7DBTradingETFfiles
And put as a string into SaveAs
wbNew.SaveAs Filename:=Worksheets("Control Sheet").Range("C6") & TickerIndex & "ProSharesNAVRatio" & ".txt", FileFormat:=xlTextWindows
I'm trying to put together a SumIfs formula to find the total count of procedure codes during a certain time period, for a given market.
I have the Market column, Procedure Code column, Date column, and count of Procedure Codes column.
The range of Procedure Codes I want to total on are in cells C4:F4 and they are:
99307993089930999310
It's fairly straightforward with the dates in the SumIfs as well as markets, but I'm not able to get the range of Procedure codes to work like I want. These 4 codes are just the criteria that will use to pull the totals from, which comes from a much larger dataset.
I need a script that will search through a selected range of cells and add a simple IF statement.
For simplicity, lets assume the desired range is Q36:Q40. (The range is much larger than that.)
The existing formula is:=IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37))))
I would like to keep all existing forumulas, just tack on an IF statement before hand that says if a certain cell (Q2) reads "CoPrep" then do nothing, otherwise use the existing formula. I envision this as =IF(Q2="CoPrep","",IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37)))))
FYI, the background to this problem is that I am in the process of making a financial forecasting model that allows for choices of company prepared forecasts, hence "CoPrep", or model forecasts based off of other critera, both of which can be sensitized.
I want to search the selected range for a variable value (calculated previously in the sub) and if it finds the value I want the sub to do some things. If it's not in the range I want it do something else.
Here is the relevant section for what I have:
[Code] ......
This works and cuts the value I'm looking for if it finds a value in the range. The problem is it's not in the range I don't know how to tell it to follow other instructions. I tried the "iserror" with an in statement, but it said the range was not set. Intellisense isn't working and I don't really know how to use the .find method ...
I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.
View 14 Replies View RelatedI have data that has months in it that are spelled wrong and in different formats etc. I need to be able to search the range of data I have created in a separate table in order to return the correct abbreviation into my spreadsheet. See below:
Need to be able to search this range (A1:E12) and return the corresponding horizontal value in the last column (Jan, Feb, Mar)
JanuaryJanuraryJan-11JanJan
FebruaryFebruraryFeb-11FebFeb
MarchMarchMar-11MarMar
AprilAprilApr-11AprApr
MayMayMay-11MayMay
JuneJuneJun-11JunJun
JulyJulyJul-11JulJul
AugustAugustAug-11AugAug
SeptemberSeptemberSep-11SepSep
OctoberOctoberOct-11OctOct
NovemberNovemberNov-11NovNov
DecemberDecmberDec-11DecDec
I am currently trying this, but its not working! =IF(F2="","",VLOOKUP(F2,Dates!$A$1:$E$12,5,TRUE))
I want to create a simple if statement to search if a value in cell B2 is equal to a value in the range 'CodeCheck'!A1:A92
I have written the code =IF(B2='CODECHECK'!A1:A92,"Y","N")
I am always getting N returned even though I am 100% sure the data in B2 is in the 'CODECHECK'!A1:A92 range.
I have a combobox which is linked to a list of policies which has information to the right of them, upon changing the value in the combobox the subroutine below is activated.
It stores the value of the combobox in a string variable, goes to the list and searches for the cell containing the policy. Upon finding the cell it uses the range offset operation to select the two boxes to the right of the active cell. This is where I get my error 1004 - application or object defined error.
Code
Private Sub cmbSectionName_Change()
Dim mySearch As String
'Assigns combobox contents to mysearch
mySearch = cmbSectionName.Value
'select the range
Application.Goto Reference:="SectionNameList"
Sub SheetFinder()
Application.MacroOptions Macro:="SheetFinder", _
HasShortCutKey:=True, ShortcutKey:="G"
msg1 = "What sheet would you like to go to?"
msg2 = "I'm sorry, but that sheet could not be found."
On Error Goto NotFound
TryAgain:
prompt1 = InputBox(msg1, , "Template")
If prompt1 = "" Then
End
Else
Sheets(prompt1).Select
End If
End..........
