I have a string of numbers and characters and I have a Macro that I copy-pasted from somewhere online that REMOVES any character that is not a number.
Is a great Macro that transforms:
"-a209 03 . 1 - 22 46" to 2090312246
I can send the code on request.
However the problem comes when running the macro into that string excel transforms it DIRECTLY into a Numeric. That is we are missing the first two, or first characters when they are zeros.
For example: "007 01 1.32.08" becomes 70113208 in stead of: 0070113208
And this is a problem.
I have tried to define the cell as text before running the macro. Fails. I have tried to re-define the cell afterwards as text but the zeros do not appear. Fails.
Including in the Macro a last minute section that forces the cell to remain as text...(seems easy! but I have do not know how to program in VBA)
I have a spreadsheet that has numbers in column A (example = 31, 15, 159) I want to count the number (159) each time it occurs and keep a running count of it in say column B... example..... A1 = 159, A2 = 31, A3 = 159, so B3 would show (2) as the number 159 has appeared 2 times thus far.
Is it possible to have numbers added to the same cell and have excel continue to calculate the addition for me in that same cell......ex: I have the number 8 in cell d2 and I want to add the number 8 to that cell and have excel add the 8 to the previous 8 for a total of 16 in the same cell.....the next time I would add 5, and the total would be 21? Can this be done in a single cell?
I’m working in Excel ’03 with a large table. I’m hoping to run a macro against a cell with value ‘X’ whenever that value is found within a particular column. I’d like this to be relative and not tied to a particular column so I can tweak it as needed down the road and run it against different columns.
In the example below, lets say I’m working with column B. I’d like something that would go through every cell in the column and run a macro when it comes across a particular value. Let’s say this value is x.
__A B C D E F 1 a x a a a x 2 b a b b b a 3 c x c c c c 4 f f f x f f 5 s s s a s s 6 g x g g g x 7 a a a a a a 8 s s s s s s
So, in my example, the macro would be run on B1, B3, and B6. And, if I wanted to go back in later, I could run this on column D and the macro would run on cell D4.
I have some code here that I am using to find matches in Column D and then remove colored cell once the match is found. I am in putting the data line by line from a Barcode scanner and only want to run the macro if the date in Column A is today. Here is the code I am using.
I have an excel spread sheet with several rows of 265 (9A-IV) columns each with a heading. I would like to transpose the worksheet columns so that the heading is placed in Column A against the corresponding that is placed in column B. For example
I have 5 columns. The first 4 columns only contain 1 line each, the last column can contain anywhere from 1-6 lines. How can I do a sort and keep all the text in the last column together? By way, it was imputed on separate lines.
I need to sort my data by the oldest date first in colum L (NEED_DATE), but I need to keep the rows grouped by colum A (Material No). See example of data.
Material No Tool No Prodn Ordr No Curr Oper No Curr Workcenter Cd Next Oper No Next Workcenter Cd
I have a table with one column of data. The data in this column repeats with 4 relevant pieces of information that I want to put in 4 different columns (fields) in a different spread sheet (or the same would work better and I would just delete the first column when done) keeping the same order the data is now in. The data currently repeats in a regular pattern (i.e. 123412341234 with no other data in between). I would like to do this with a macro. Could someone help write a macro that will do this
I have a column with dates and times, and an associated column with data for all the dates and times. I want to add every hour of every day to the date/time column, but want the data associated with the times to stay in the row next to the correct time. How would I do this? In the attached file, i want to make coulmns A and B look like Coulnds E and F. I have hundreds (if not thousands) of rows, so i need a way to do this easily. Also, the times are not all evenly spaced or exactly on the hour. I dont need the times to be exactly on the hour or spaced out evenly, but i would like to have at least one time from every hour.
I copy a table from a data dump dbf file into worksheet 1. I enter a separate column titled "Comments" and use this for status purposes. My problem is that when I refresh the worksheet, my comments don't stay attached to the rows/ records that they were originally entered for.
I have a spreedsheet with 17,000 rows in it. In column D I have ID numbers and in column B I have the dates. There are multiple entries for each ID in column D which gives multiples dates each entry was given in column B. I need a VBA Macro that will identify duplicate entries in Column D and keep only the most recent entry by date in column B.
I have the following Macro that I run assigned to a Button.
Sub AskAndDo() If MsgBox("Have you Finished collecting data ?", vbYesNo + vbQuestion) = vbNo Then Exit Sub Else If MsgBox("Have you Printed the Reports ?", vbYesNo + vbQuestion) = vbNo Then Exit Sub Else ActiveWorkbook.SaveAs Filename:="\gamingntcompanyFLOAT MASTERFloat_Sheet_" & Format(Date, "_YY_MM_DD") End If End If Application.Quit End Sub.......
I have a macro I found here on the boards written by Lenze to delete an entire row based on what is found in column A. I would like to delete any row where Col. B contains 10 or less characters and I have modified it to do so (or at least I think it does). My problem is that it takes about 12 minutes to run the macro (I have about 50k lines to run through). I was wondering if this is the fastest method or if it examines things other than just column B.
Sub Test() Dim i As Long LR = Cells(Rows.Count, "B").End(xlUp).Row For i = LR To 2 Step -1 If Len(Cells(i, "B")) < 11 Then Cells(i, "B").EntireRow.Delete Next i End Sub After this runs, I am left with Columns A to somewhere around AH. The columns are generally in the format of text followed by a numeric column. An individual text column has the same name through all of the rows. The numeric columns have varied values whether negative or positive. Ideally what I would like: If a given cell (ie. C2) in Row 2 is numeric, then copy the cell to the left (ie. B2) into (ie. C1) and then delete Column B. I need this to work for multiple columns from B to C, skip D and E, and then from F to AG (and maybe beyond).
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E 1 X X X X 2 X X X X 3 X X X X X 4 X X X X 5 X X X X
This macro is extreemly basic but i have no skills in excel with macros. Basically i have 'Column A' with stats that i need input into 'Column B', however i need then to be input inside a field that is already there.....
I have a macro that copies data from one sheet to another. I would like getting the macro to figure last row used in column B from B3 on and put the word Sum below it. For example, if last row used is B64, on B65 would like the word sum on it.
I cannot just input in as the number of rows could change when macro is run. Data is dynamic.
Here is simple code I have:
Sub Weight() Sheets("Final Month").Select Range("A2:B1055").Select Selection.Copy Sheets("Final Weight").Select
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I don't understand why my macro doesn't work for "text to column". I did the usual: record new macro -> I select the column -> goto Data -> Text to Column ->next -> next -> finish.
Can I use a macro to change text in a cell? As an example, I have this list of names in a column. I'd like every other name to have a semicolon instead of a comma after the name. My list has commas now
Tommy, Joe, Warren. Billy, Bob, George,
And I want it to look like this. Tommy, Joe; Warren. Billy; Bob, George;
Since I'm using macros on this page, I'd like to use a macro to do this
