List To List Dependency
Aug 16, 2008
I'm a complete beginner when it comes to excel, so please bear with me. I am trying to make 1 list bring up a varrying 2nd list ie:
list 1 contains List 2 Contains List 3 Contains List 4 contains
Car1 Option 1 Option 4 Option 7
Car2 Option 2 Option 5 Option 8
Car3 Option 3 Option 6 Option 9
My question is this: How can I make it pull up a drop down list 2if I choose Car1 and drop down list 3 if I choose Car2 and drop down list 4 if I choose car 3. I need it to take only 2 columns? I read a different post about dependencies, and it was close to what I was looking for however it populated a column, instead of giving a 2nd drop down list.
View 3 Replies
ADVERTISEMENT
Jul 31, 2013
I've been struggling with dependencies, so I have two sheets.. the first sheet contains a simple table:
EmployeeUsernameStatusStatus Note
Alex
Josh
Sarah
David
This is the second table:
Employee Username ActivePassword Change Days Since Change
Alex al2 Y Y 20
Alex alex Y Y 11
Alex aa2 N N 0
Josh josh2 Y Y 10
Sarah ssarah N N 0
Sarah sarah Y Y 1
David David Y Y 4
The problem is in the first table as I don't know how to populate the "Status Note" column which depends on these two columns The column Username which is a dependent list from table 2 that contains the username associated with each employee selection The column Status which is a dropdown list that contains (Active, Password Change, and Days Since Change)
For example if the following is selected for user Alex: al2 and Active how can I make Excel display Y in the status note column
EmployeeEmployee UsernameStatusStatus Note
Alex al2 Active Y
Josh
Sarah
David
View 3 Replies
View Related
Jan 12, 2014
how I can list 3 different values to a list of list of 3 in a combo box, is.
combo box
select high = 35
select middle 30
select low = 25
I have the names in the box I just need it to add a value (which I have listed 1 in each separate cells) to each selection
View 9 Replies
View Related
Apr 18, 2013
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
View 1 Replies
View Related
May 19, 2014
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies
View Related
Jun 20, 2008
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies
View Related
Mar 8, 2012
I'm using Excel 2010 on a Windows 7 machine.
I have one sheet with a large list of dates and total prices.
I have a second sheet with a list of dates and unit prices.
I want to divide the total price in my first list by the unit price on my second list.
I want to somehow point Excel to the date in the first list, and then lookup the corresponding date in the second list to use the correct unit price.
My thoughts thus far have been along using VLOOKUP with WEEKNUM and YEAR but I've been unsuccessful.
View 2 Replies
View Related
Jan 28, 2007
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies
View Related
Jun 15, 2007
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
View 4 Replies
View Related
May 17, 2013
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies
View Related
Apr 11, 2014
It is a product list of office stationary with codes, descriptions and quantities. Using this spreadsheet we input into the quantity how many we want of the item, all well and simple you could call the list a stationary order form.
What I would like to be able to do with this Giant list is to have a function that would extract items off the list into a cleaner consolidated form. As in, if I wanted to order some of item A, C and F, I would like for the second table to just Show ACF without every letter in between or blank cells.
I know a simple method would be to have an IF formula to return the information to a new sheet that I could simply remove blank cell rows (unordered items) and ready for print each time. But I would love to know if there is a better way this could be achieved.
I have basic/intermediate knowledge of excel and can setup the data if need be in order for the function to work, but I can't seem to find the correct function for this project.
View 8 Replies
View Related
Jan 20, 2014
I need to consolidate these two lists of data into one list.
First set is just a basic list of individuals with their data.
Second set is multiple entries for those same individuals. Each entry shows a subscription to a programme. The final single sheet should have one row per individual which shows all of the programmes they are subscribed to.
See attached, example sheet.
The real list is 3000 IDs, so need some kind of formula to do this.
View 4 Replies
View Related
Feb 14, 2014
I have a list in column L2:L352. I would like to be able to start at AD2 and drag horizontally so that AD2 = L2, AE2 = <BLANK>, AF2 = <BLANK>, AG2 = L3, AH2 = <BLANK>, AI2 = <BLANK>, AJ2 = L4, etc.... until L352 has been autofilled.
View 2 Replies
View Related
Mar 27, 2014
I have a large amount of data, 40,000+ rows about how students do in remedial classes including from whom they took the classes. I have pulled from it a subset of student success as relates to the separate instructors. Now I would like to extract a consolidated list of those instructors for whom the student gain on criterion based pre and post course assessments is above a specific level. I have no trouble writing if statements that will look at two types of data, the course taken and the average student increase to determine which instructors meet or surpass the criterion, but I can only do that within a list that includes all the instructors. Because there are more than an hundred such instructors, it would be easier for the dean if I could provide a short list of those that meet specific criteria. I believe that it would be an array that I should use, but I have been fooling around with this for 2 days now, and am finding myself at a series of deadends!
View 5 Replies
View Related
Jun 24, 2009
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
View 8 Replies
View Related
Feb 8, 2013
I'm currently working with 3 dropdown lists depending on each other using data validation and =indirect(). I arranged them like in a top-down approach where you have a mother-list and child-lists (categories-->subCategories-->subCategoryCriteria). The user should easily chose first a category then a subCategory etc... This part works perfectly
My question is: when a user chose in the dropdown list e.g. a category, a subCategory and a subCategoryCriteria and he now maually deletes the value in the highest level, which is the Category (mother-list), all sub level values like subCategory and subCategoryCriteria will stay. It shouldn't be that way, because it's not logical. If you turn a tree upside-down (top-down approach) and cut one of the higher positioned trunks, all lower positioned trunks will fall off as well, right? So, my question is: can I use a conditional formatting or a formula to delete or fade out the value in the lower lists when the higher list value is being deleted?
I tried to use If-formula in combination with indirect in data validation, like =IF(A1="";("");INDIRECT(B1))...just and example.
The value doesnt need to be deleted, it could also be automatically face out like white on white or something. It's just confusing for the user if he deletes the highest choice and the lower choices still stay.
View 8 Replies
View Related
Jun 11, 2013
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
View 7 Replies
View Related
Nov 21, 2013
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies
View Related
Feb 25, 2014
Is it posible and how to create a list of barcodes from a list of numbers on the worksheet?
Strokescribe seems to have some ind of solution but the data can't come from the worksheet.
View 8 Replies
View Related
Jan 13, 2009
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
View 9 Replies
View Related
May 28, 2014
The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant
Dim row As Range
Dim elements() As String
[Code]....
View 2 Replies
View Related
May 9, 2014
Is there a way to create a drop down list from a comma delimited list in a single cell? For example, col A is Name & Col B is the delimited list - Blue,Red,Green (list can be different for each name). Would like a drop down list in col C that allows you to pick one of the values from Col B.
View 3 Replies
View Related
Jun 5, 2014
Does excel 2013 have a fence way to sort a list of alpha numeric numbers and alphabetize in this order A - Z and then 0 - 9.
Ex) Apple, Greg, Rob, Sand, 123, 126, 1000, 2001
View 2 Replies
View Related
May 8, 2014
I would like to be able to compare the "standards" in Column A with the Assessment status in Column B and the Assessment period in Column C in order to generate a compact list in another workbook (ideally) or tab (if not). A list might typically contain all the standards that have been M (mastered) during a given Assessment period. I realize that filters would achieve this to a large extent but I was hoping to automatically populate another worksheet or tab.
View 3 Replies
View Related
Sep 13, 2013
It's a quarterly schedule for utility meter readers, divided up into days across the top, and routes/areas down the side.
There's a space with each route for the employee ID to go, depending on who's doing it.
Down the bottom of the sheet, there's a few empty lines for all the available employees who haven't been allocated to a route.
On the second sheet labelled EMP LIST, is all the employee IDs. It's also got the areas they work- it's for something I want to implement later.
I can put all the employees into a single column list, then use basic DV to give a dropdown menu by each route, to assign an employee to it. This is pretty straight forward. I've also been playing with this in combination with a countif, so that employees already assigned do not appear in the list.
This is about as far as I've managed to get with it.
I need to get the employees who aren't assigned to anything to appear in a list below the routes. I'm fairly sure this is just another countif, but I'm not 100% on the exact formulas.
I also need the list in the dropdown menu to reset for each day of the quarter, i.e. if I assign an employee to a route on the 30th day of the quarter, their ID will disappear from the list for any other route for that day, but will still be there for the other days of the quarter.
So far the only way I've managed to do this is by duplicating the employee list for every day of the quarter, which is going to get very cluttered, and also makes staffing changes difficult. I'm hoping there's an easier way to do this using one data set.
I've added an example of the sheet. It's one week and it's only got about 1/3 of the routes we would actually have on any given day.
scheduledemo.xlsx
View 1 Replies
View Related
Jan 9, 2014
I am working on an email marketing project and i have a small problem. I have two different email list. One (List A) is a large list of potential leads. The other (List B) is a list of leads we are not supposed to market to. I need to delete every lead on List A whose email address is also in List B, so that we do not send unwanted emails to our clients.
The best way i have to do this so far is to go through line by line, which is very impractical.
In case it matters here is out list format. Each list has 10,000 + leads. Each lead occupies a row. The row stretches across 13 columns and each column holds a different variable about the lead (names, state, email address).
View 2 Replies
View Related
Feb 8, 2014
I would like to take a List of numbers, which come from a separate spreadsheet, place them into a UserForm text box and then use a command button to input the list of numbers into a column of cells. The list would often vary, between 1 and 10 entries. But if I could do this, I would be able to resolve an issue with my spreadsheet that continues to haunt me (the dreaded number stored as text.....). I know that you can assign a single textbox value to a single range-cell value. But if I could input a list at a time, it would obviously save a lot of effort.
Example
In spreadsheet #1, I would copy the list below.
25466
87550
66985
44252
In the user form I would paste these numbers into the text box and they would be input into Sheet #2
B6 = 25466
B7 = 87550
etc. etc.
View 2 Replies
View Related
Feb 12, 2014
I found code online that I can put on my sheet to get my formatting properties to stay the same for the items in my dropdown list located on another page. However the code does not work for conditional formatted cells...which is what I need. This is the code that I have that will carry over regular formatted cells. Just not Conditional formatted cells.
View 1 Replies
View Related
Oct 28, 2011
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies
View Related
Apr 29, 2012
I have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
View 4 Replies
View Related
