I need to put a formula which will show me required quantities under a relevant date which is already calculated in an aside table.
In the cell E8 I want it to look up for A8 in the table A35:AR45. Then in that row to find a date which is exactly the same or smaller than E7 and bring up all summed quantities from the table A50:A55 (quantities summed must be in the same column where the relevant date was found and in the row where the requirend part number is).
In the other hand I need to doin the cell H8 to llok up for A8 in the ableA35:AR45. Then in that row to find a date which is exactly the same as in H7 and bring up all summed quantities from the table A50:A55 (quantities summed must be in the same column as the relevant date was found and in the row where the required part number is).
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
is it possible to concatenate in such a way that formatting is retained? For example, my =CONCATENATE formula refers to a cell containing 0.065, but which is formatted as a % so that the cell shows 6.5%. Concatenating that with text, however, produces "0.065 [text]"
on the attached file I has three columns code; day; Trays. I want in G3:G9, by ascending order, all diferent days from the code C, I can avoid like this, that the users type that information. and so on G12:G18; etc.
The worksheet has two sections, Extra payments and Loan Schedule.
If a date in the Extra Payments section is within a range in Loan Schedule, the enter its corresponding value, or sum of values in the Loan schedule under its respective date.
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
I need a formula that will give me a persons name that is stored in Column B based on the highest value within 5 named ranges. Each named range is a selection of every other cell in individual columns i.e. named range junior1 is cells in column E, named range junior2 is cells within column H and so on.
I've attached the worksheet as it as present.Sample Running Scores 3.xlsx
Cell Y3 shows the highest individual score shot (not handicap score) from columns E,H,K,N,Q (or more accurately the named ranges Junior1, Junior2, Junior3, Junior4, Junior5 within these columns). Each of these columns represents a different round in each league, in this case a Junior National League. I now need Y4 to show me the name of the person that shot the highest individual score, in this case Person 21.
I know I need to use a combination of Index & Max in some way but I can't work out what or how.
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559 Pallets: 3 Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code To Zip Code Pallets Weight From Weight To
I'm having a problem referring to the value in my text boxes. I'm trying to refer the value in those to certain columns and rows that will be deleted after.
My file has a code that refers to a dynamic named range. When I run the macro that range gets corrupted and I cannot figure it out why. before the macro the named range refers to:
This thread is related to this thread. Offset, Match, Max Formula In the Insert - Name - Define window:
If one wants to copy a formula from the "Refers to" box and the formula extends past the right side of the box, how does one use "select all" or mark the whole formula from beginning to end so it can be copied without messing up the formula. At the moment, when I try this, it changes the formula to include the active cell of the worksheet that's open when I use the Ctrl + c etc. I have tried Ctrl + Ins and Ctrl + a and Ctrl + c. None of these are working for me.
I'm working with a multi-page workbook I use for work scheduling purposes.
This is how Sheet1 is set-up:
A B 1 Name
[Code]....
In the cells in Column D I have used the following formula =IF('Sheet1'!B2="Yes","Holiday",""). What I have realized is that this formula is quite limited. For example not all 12 colleagues work everyday and they work different shifts on different days- each day's data is sorted so that the colleagues are organized primarily by Shift start time and then alphabetically by name- consequently if I used this formula across the entire workbook the Sheet1B2 data may not be consistently referencing the same colleague.
I was wondering if there was a way to amend the formula so that if a colleague is marked as 'Yes' in Sheet1, 'Holiday' could be inserted in Column D in the rows corresponding to where the colleague's name appears?
is there a way to have the same named range cover a range of cells regardless of which sheet you are on? They seem to want to default to the page you are on. I want to make some VBA subroutines that will go over each sheet, and perform the same functions on each sheet. All sheets have the same format, but different data. I guess worst case scenario I can just break down and use multiple workbooks, but this seems a little less desirable. Should I be dividing this into seperate posts?
I had the following VB string written for me recently, that cross refers Tab2 on a spreadsheet to tab1 with any duplicated fields in Tab1 being moved to Tab3.
Column B is the column I am comparing over the 2 sheets...
Sub DIVIDEND()
Dim Master As Worksheet 'Tab 1 Dim RefTab As Worksheet 'Tab 2 Dim NewTab As Worksheet 'Tab 3 Dim Cell As Range Dim iRow As Long Dim jRow As Long Dim ff As String
The addition I would like to add is after this first action has taken place, I need all all of the data that is in Tab2 and not Tab1 moved to Tab 3.
To summarise, I need any info that appears in Tabs1 & 2 moved to Tab 3 and any remaining lines that are on Tab 2 and NOT Tab1 moved from Tab2 to Tab3.
I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
I have a very large spreadsheet of customer information(I call it the master spreadsheet). Each row contains only 3 things: Account number, product bought, Price
Later I receive the money from the customer for that product(the pay sheet) that contains the exact same thing in the same order: Account number, Product bought, Price paid.
What I'm trying to do is compare the two spreadsheets so that when i receive the pay sheet of cusomters who have paid with the amount it will deduct it from the master sheet.
So it should compare account numbers when it finds a match then it should subtract the amount paid (column C) from the master spreadheet price column(column C also).
sometimes customers don't pay the right price so it has to be a subtraction so I can see if it was over paied, underpaid etc.
Right now I'm still doing it manually combining the two documents sorting it by account number and checking for matches in column A (account number).
I have a table with three columns. I'm building a calendar on a separate worksheet and am looking up the "value" based on a calendar date. So if a date falls within any of the ranges, I'd like to return the value in column C. For example, if the date is 02/07/12, I'd like for the result to be value 1, or if the date is 04/17/12, then I would like the result to be value 3. I've used a nested vlookup, but all that give me is the value when either the start or end dates match, but I can't get a value when the date falls within the range. If the dates were consecutive, I would simply use vlookup/TRUE, but the dates are not consecutive.
In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A Row2 56 Row3 44 Row4 65
AllData is a named range that refers to the range A2:A65536 AllData_UsedRange refers to A2:A4 by way of this formula. =OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work... ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I have a formula in the Name Define part of excel in workbook that refers to another workbook. =IF(COUNTIF([DaysWorking.xls]Sunday!$A:$A,'2009'!I1)>0,1,"")
The DaysWorking.xls workbook is a data workbook, users may change the data and after they are done, they may exit the program but not save it. The DaysWorking.xls workbook should always revert back to the original form. I've put a read only property on it, but the problem lies when the user saves the file under Save/As function. Excel then updates the link to whatever the user saves the file as. Is there a way to make sure that the formula never get's changed?
I'm trying to create a user request form. In one section of the form, the client will enter in a list of "Allowed Roles". These are roles that they have rec'd approval to use - these roles will span multiple applications. In a tab I've named Metadata, I've got defined ranges indicating the valid roles for particular applications. Want I'm trying to do is attempt to define a cell in the user form for one application that, using data validation, will present them with a drop down list of valid roles to choose. The stumbling block I'm encountering is that I need it to validate against "Allowed Roles" and the valid roles for that app.
For instance:
Allowed Roles range name could contain: B1 B2 C1 C2 P2 P3 D1 D3 D5 M1 O1
Payroll Roles: C1 C2 C3 C4 C5 M1 O1
The Payroll Roles (on the metadata tab) are static, not user alterable in any way, and in fact Metadata will be hidden. Allowed Roles will be entered into the form by the client themselves.
Can I use data validation to create a drop down to only allow the user to pick a value that appears in both ranges? So they couldn't select C1 (since it's an Allowed Role, and a Payroll Role), but not C3 (not an allowed roled), or D3 (not a Payroll role).
