Macro To Format Cells From Large Range
Nov 23, 2009DoneyOte on this but i have added to the range and im now getting an error that i can't seem to fix
View 12 Replies
ADVERTISEMENT
How To Replace Cell Value In Large Range Of Cells
Apr 11, 2014My data set consists of 10,000 rows and 5,000 columns. I want to search the Used Range and replace all cells which say "NaN" and make them blank.
Any code i currently use takes way too long.
Vba Macro: Check A Large Number Of Cells
Jul 13, 2006What i'm trying to do is to check a large number of cells, if "0" is written down in that cell it stays as it is and if the number is different from "0" i want to put a "1" instead.
View 5 Replies View RelatedMacro To Link Large Number Of Cells Between Worksheets
Feb 18, 2008I would like to write a macro that links cells in one workbook (working) to cells in another workbook (summary).
I don't want this to be a straight swap thought, I'd like it to contain the following formula:
=IF(Working!G8="a","a","")
The cells in the working workbook are listed vertically, while the cells in the summary workbook are listed horizontally.
ie. link G8-G18 in working to B3-K3 in summary
link H8-H18 in working to B4-K4 in summary
...etc
How To Get Large Number From Raw Excluding Date Format
Apr 10, 2013I have data in F6:AG6 raw filled with numbers as well as dates, i am looking for formula which can calculate a larger value of number format (excluding date format).
View 1 Replies View RelatedTranspose Large Data In Proper Format?
Apr 11, 2014I have huge data
I Want data to be transpose in a below format:-
Emp Code Emp Name Intime Outtime Total worked minutes Extra worked minutes Attendance Shift
And also add the row as per the number of days worked.
VBA code to transpose large number of data.
Stop Scientific Format For Large Numbers
Nov 21, 2006Im importing figures into column G of my worksheet, and I need a code so it automatically adds a "0" to the start of each row in column G plus format it.
For example, im pasting in 970702090341 but its showing as 9.70702E+11.
Once I format the cell to 'number' and 0 decimal places it looks fine, but want to save the hassle of doing it each time. Plus I need a zero at the start.
Is there a code possible for this?
Macro To Format Range
Nov 20, 2009i am getting is it only formats H11:AE12 & H14:AE15, It does not format the first range or any others. Am i doing something wrong? I recorded the first one H8:AE9 then just added the ranges for the others, have i missed something?
View 3 Replies View RelatedSplitting Large Table Into Separate Worksheets Keeping Format Same
Apr 26, 2013I have 2 large XLS sheets that need to be split into seperate sheets.
The first is only 5 columns wide but the amount of rows changes day to day.
The second is a maximum of 7 columns wide and again the amount of rows will change.
I'm hoping for a VBA code to be able to do both on seperate books.
The A Column has the name of the company, and this can include (/,&) that will need to be removed, the names can also exceed 31 characters.
I would like to seperate the sheets by the company name and have the name appear as the sheet name.
Also the formatting from the master sheet to be copied to the resulting sheets, with a header row.
I have included the data for the larger of the two workbooks. data.jpg I have to pull the smaller report each day and the larger report each week.
Copy The Value And Format Of A Range Of Cells
Jun 9, 2009I need to copy the value and format of a range of cells, is there a way to do this in one step rather this:
View 8 Replies View RelatedConditionally Format Range Of Cells From VBA?
Apr 28, 2012Is there a way to conditionally format a range of cells from VBA?
I want the cells to turn red yellow or green when i type into that cell r, y, or g.
I can easily select the range of cells, but dont know how to format them.
Macro To Format A Range If Cell = Value
Feb 12, 2009if it is possible to format a specified range of cells if one cell has a certain value. For example: If anywhere in column A the word cash appears I want to format 4 rows down from "cash" and 6 rows over from "cash" say green and put borders around it.
A B C D E F
1
2
3
4 CASH
5
6
7
8
Format Cells In Range Where Previous Value Greater Or Less Than
Mar 18, 2008I have a row with values in successive cells. Some cells are blank. I want to conditionally format the cell text colour based on the value compared to the previous populated cell (i.e. compare A3 to A2. If A2 is blank, compare it to A1).
View 9 Replies View RelatedSearch Large Date Range With Narrow Filtered Range
Aug 1, 2014I need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies View RelatedMacro To Format Cells Only Once
Jul 5, 2012I have a spreadsheet that uses a macro to format it. It’s quite simple and the code is shown below:
Code:
Range("A1:D2").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
[Code] ...........
The spreadsheet will have info constantly added on (downloaded from a CSV).
What I would like the spreadsheet to do is look at the cells and only format those that have data in them but are not already formatted – otherwise I’ll just end up re-formatting everything every time and as the spreadsheet gets bigger it'll take longer and longer.
Count Conditional Format Cells In Date Range
Apr 30, 2009Hello, we have a stop light spreadsheet for status with several different projects. In each row there are conditional format status green - good, yellow - needs work, red - bad...based on data from another tab.
There is an "overall status" column that pulls the worst color that exists for a given row.
=IF(COUNTIF(F1:V1,"r")>0,"R",IF(COUNTIF(F1:V1,"y")>0,"Y",IF(COUNTIF(F1:V1,"g")>0,"G","")))
There is also a date for each row. Now we want to pull the worst color in the "overall status" column for a date range...and display that on a separate summary tab.
For 4/1/09 thru 4/15/09 - pull the worst color from the "overall status" column from that date range.
Format Color For Range Of Cells Based On Cell Value
Jul 1, 2008I have been tasked with creating a Macro in order to help speed up a rather simple set of steps that are taken to format a spreadsheet each day. The last step, however, is not so simple. I would like to add a statement to the macro code that does that following:
Based on the value of a specific cell, color the cell and all corresponding cells within the same row (from colums A to AA) yellow. Essentially, cells in column D may have a the value "No Allocation", and if they do, I will need to format that cell yellow as well as all the cells within the same row for the colume range A to AA.
How To Make A Macro To Format All Cells
Jun 5, 2014I would like to make a macro to format all my cells.
I need it to format my last digit to superscrift IF there is 4 digit after decimal point.
How to do this?
Macro To Combine 2 Cells In Value Format
Jun 9, 2007I have 2 cells that dump data in a column format. I need to combine these two cells with a ' after the data in the column. This macro will loop down until both column J and K are empty,
I need a Macro that
1. Will combine both cells
2. Data will be value format not formula
3. Macro Will run as soon as workbook is opened
Ex.
F J K
1 Prop MD MD Objective
2 1' Test Data 1 Test Data
3 235' next data 235 next data
Format A Range Of Cells, Columns And Rows Will Vary In Length
Jun 16, 2009I created a macro on an Excel spreadsheet:
Sub Macro1()
Range("C11:D19").Select
Selection.NumberFormat = "$#,##0.00_);($#,##0.00)"
Range("E5:E20").Select
Selection.NumberFormat = "0.00%"
Range("D24:E43").Select
Selection.NumberFormat = "$#,##0.00_);($#,##0.00)"
ActiveWindow.SmallScroll Down:=24
Range("D58:E339").Select
Selection.NumberFormat = "$#,##0.00_);($#,##0.00)"
ActiveWindow.SmallScroll Down:=57
End Sub
When the macro is run, it works with the exact amount of data that I've entered.
However, because I have specified a specific range, if I add a row or column of data to the spreadsheet and run the macro again, it throws the whole thing off (certain cells get formatted when they shouldn't and others aren't formatted)
How do I tell the macro to look in the spreadsheet for varying ranges of data and format those cells?
Automatically Format Range Based On Formula Result Of Cells
May 16, 2009The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
Conditional Format Color Of Cell Based On Values In Range Of Cells?
Oct 24, 2013I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
Macro To Conditionally Format Referenced Cells In Another Sheet
Apr 27, 2013A
B
C
D
[Code]....
There are four sheets (labeled A,B,C)
Depending on the contents in cells in Columns A and B (which have 1000+ rows), I want to change the background color of a referenced cell elsewhere:
For each row (lets say from 2-1000)
1. If "A" cell is blank -- referenced cell (address in columns C & D) should be colorless -- (as in Row 2 --- cell Z5 in Sheet "C" should be colorless)
2. If "A" cell has text AND "B" cell is blank, reference cell should be colored BLUE -- (as in Row 3 --- Cell F3 in Sheet "C" should be BLUE)
3. If both "A" and "B" cells have text, reference cell should be colored YELLOW -- (as in Row 4 --- Cell C5 in Sheet "B" should be YELLOW)
While I could do this with a conditional format in every referenced cell, it would take too long to enter them.
Excel 2010 :: Macro To Format All Cells In Column According To Value
Mar 27, 2014I need Macro to Format all cells in column according to value. The cutoffs are >20, between 21 and 50 (>21;<50) and greater than 51 (<51).
I have macro to consolidate cells from multiple files to single workbook. Now I have to 'color code' the value in all cells in column 'B', all as part of one large macro.
Macro To Find Cells With Perticulat Format In A Worksheet
Sep 6, 2007I have a work sheet with around 50 odd sheets. What i want is to list out all the cells that are in perticular format
e.g.....
VBA Conditional Format Range Of Cells Based Upon Criteria In One Cell / Repeat For All Rows
Apr 3, 2014Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
Concatenate A Large Range.
Jun 19, 2009I have a column of numbers in A1:A200 that I need to concatenate with a ";" in between each into one cell. Is there a way to do this without clicking in each cell individually? =concatenate(A1:A200) just returns the value in cell a1.
View 2 Replies View RelatedMacro Required To Conditionally Format Cells Automatically, Responce To User Events
May 2, 2008ABCDEFGHI need to create a macro to perform some conditional formatting1DateDayTypeTimeConfirmed Order No.Site Location2SHEET OVERVIEW301/01/08TuesdayAB4CVertically there will be 366 tables to represent 366 days and Horizontally 10 tables to represent 10 employees,5Dwhich enables the work activities of 10 employees to assigned over the period of a year.6E7AAFIn the type box marked 'A' and 'AA' the user selects from a drop down box a parameter as list below left.8GOn entry of an 'n' in the type box the user can enter data into the 'time','confirmed order','site location' boxes.9HThe idea of having 2 x type boxes is to allow the day to be split into morning and afternoon.10I1102/01/08WednesdayMACRO / VBA FUNCTIONALLITY REQUIRED 1213In the 'type' boxes if the user selects anything other than 'n' then the 4 'site location' boxes and coloured and 14the appropriate text from the list below left is inserted into the 4 associated 'site location' boxes.1516Example:1718Box marked 'A' the user selects 'h'. Boxes marked 'BCDE' and filled with colour and the text holidayBox marked 'AA' the user selects 't'. Boxes marked 'FGHI' and filled with colour and the text trainingType List Entry ParametersWhen the user selects type 'n' after the associated boxes are returned to there blank state (no colour or text)nnormal dayhholidayThe macro/vba would have to respond on everytime a 'type' box changesssickttrainingThere would be 2 x type boxes per day, 366 days a year and for 10 employees. Therefore it would have to monitoruunauthorised absence2 x 366 x 10 (7320) type boxesbbank holidayccompany shutdown
View 9 Replies View RelatedFind Value In Large Range Of Data
May 29, 2014I have enormous amounts of data to sort through (as we all do) and I am trying to link them to unique identifiers for easier data maintenance later.
What I want to do is vlookup from the 'solved' sheet a code, which will search the 'data' table and return the 'DFU' code.
Example 2905.xlsx
How To Find 1 Value In Range Of Other Large Values
Mar 24, 2013I'm looking for a formula that would tell me if a value in colume E can be found in column M while the values in column M may have characters before and after the value I'm looking for. The values are alpha and numberic in many cases.
Find E2 in M:M where E2 = 0123 and is in M:M as a15012388. The "yes/no" result is marked in red where I would like to have the answer.
Description
Looking For
Yes/No
[Code].....
