when I run my mcaro in a worksheet that has 4 different sheets , like sheet1 which I called 1, sheet2 which I called 20A and so on, ....
when I run my macro in sheet 1 I find out that sheet2 which I assigned total in it , " total is not working" , it does everything exactly how I want it except for the total, and I have to run the macro from the sheet 20a itself to have the total show for my, why is that , since all the information all shows right.
I want to know how can I get my macro to run it from any sheet in the worksheet ans still the total for each sheet ( and I do not have to go to each sheet and run it again to get the total for that sheet). my macro is as the following.
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following: Within a workbook the 1st sheet is the data entry. In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example: Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry. G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I have several files that are alike except that some have a different number of worksheets ion them.Some may have 12, some have 30. I need a macro or code that I can put in each file on the last sheet that will calculate the totals of L25 of each sheet (All Sheets) and put the Grand Total in the last sheet on cell M25.
Again,Some of the files have more sheets than the other , but I'd like the code to total L25 of all sheets, regardless of how many there are and put the Grand Total on the last sheet in cell M25.
I have a workbook containing 120 sheets. Each sheet contains a column labelled "Subject", and a row below labelled "Totals:" with a numeric value in the intersecting cell.
I need a formula that will total the value in all these cells on the last sheet.
The trouble is, the cell address of the intesecting cell fluctuates somewhat from sheet to sheet because the column and row for the "Subject" and "Totals:" are not always the same.
******** ******************** ************************************************************************>Microsoft Excel - Book1.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF30= ABCDEFGHIJKLM5**Check*Date*01/05/2007*to*09/28/2007,*Job*616003*to************6**6440009,...,Job#*642010*-*HEATHER*GLEN@MONUMENT*BO************7*************8***Record#****Check#**Period***Employee*****9****Comp*Code*********Hours**10*************11*************12*************13*Totals*by*Comp*Code:*************14*Comp*Code*************15*****Hours****Wages***Overtime**Subject***Rate*16*************17*5183***PLUMBERS*UNDER*$23*************18*****19.00****376.50****376.50***11.5400*19*5187***PLUMBERS*ABOVE*$23*************20*****5.00****120.00****120.00***6.5300*21*************22**Totals:***24.00**496.50*0.00496.50**Sheet8* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I want to be able to total the "Subject" wages for codes 5183 & 5187 (unfortunately, the payroll amounts are located one row below) for all 120 sheets in the workbook.
I have a blank sheet and need to total values in cells to the right of certain information from a range in 90 sheets in other workbooks contained within the same folder.
for example the range is O13:AX500
the first text to search would be "P1", that could be found several times within the range in each workbook with the sheet named "plant"
The value to total would be found in the 2nd cell to its right, ie "P1" in cell O13 then value "£290" in Q13 ::: "P1" in cell X365 then value "£100" in Z365 and so on throughout all 90 workbooks.
The total of the referenced values would then be placed in say B1....
I have around 500 reference codes to total throughout the 90 workbooks so maybe having a list of the text reference down column A may help the process.
Is it possible and can anyone please help with the code to look at a piece of text in new sheet with cell A1 to A500 containing "P1 to P500" and then total all values in the cell 2 to the right in every workbook and place the total in new sheet cell B1 to B500
formula to take a value from one sheet and add to it in Excel 2010? I'm naming the sheets but not necessarily numerically. I have done it by manually entering the sheet name but would like it to figure out the sheet name automatically based on where the sheet is located in the workbook. That way I can copy the current sheet, rename it and still have it update properly with a running total. Here is what I have now: =D7+'011514'!E7
My Problem is I have a workbook with multiple sheets with a possibility of a number between 2 and 999 occurring. I am looking for a formula that can display a table on the "total" worksheet for every ID number that has been entered and the number of times the ID number is displayed.
I have a single work book with 8 sheets (I am using Excel 2010 BTW) and I am trying to find a total of times a word appears across all the sheets in column "C"
I found this formula on another thread. =SUM(COUNTIF(INDIRECT("Sheet"&{1,2,3}&"!C1:C1000"),"="&H3)) with an example. I made the changes that I needed for my purposes
This worked but only after I renamed the sheets to Sheet1, Sheet2, etc.
Is there a way get the same results from the above formula if all the sheets are named after our reps? Example: sheet1 is named Dan, Sheet2 is Nick, etc?
We have a weekly "On-Time" report that shows early, late, on time, or no data. Each week has a total percentage of early, late, on time, or no data deliveries. I now need a monthly total on a seperate worksheet, but for some reason I can not get the percentages to total correctly. I am attaching the spreadsheet.
I am trying to write a macro that will add a subtotal in column G12:G1000 at every cell location that is BOLD FONT. So, what I am trying to say is each time the macro finds a BOLD FONT cell it adds all numbers above it, up to the next BOLD FONT cell. This may happen at a large number of locations in the column.
I worked on this macro for about 2 hours, with only partial success.
I have credit card data (will attached next post) sorted by tender type. I recorded teh subtotal feature, after selecting the data. I used teh go to, special, last cell, feature to get the end cell for selection, and also set the print area to this range. I did it in relative mode.
the macro worked, but when I also tried to insert three rows above the "grand total" cell, then insert a sub total of just master card adn visa, it in one of these added rows didn't work upon playback.
also - Can I lock the position of my macro buttons? IN properties it's set to locked but they still move when teh data changes. Can i put them on teh tool bars?
I am looking for a macro that will look at the data and for each Item Description (Column C) I want it to sum the values in Column J and put in cells M1:Nxx. See example.
i tried using the autofilter and creating tables, but makes the sheet large in size...
I was given a spread sheet with a number of payments on it, I was asked to take the "four" potential payments and only show one total payment. There are 2900 lines in my file and as you can see from the example the scenario repeats it self with the "four" payments all the way to the bottom. I would like to be able to add H2 to H5, total that number in J2 and delete row 3,4 and 5. This then has to be continued all the way down to line 2878 where I could then run a macro I have to delete blank rows cleaning my spreadsheet up. I would take a looping or user controlled macro (ctrl +) so I don't have to do this manually.
I have created an array in Excel VBA 2003 and successfully loaded it with values. The array variable is called "Week". I am currently getting the sum of the numbers in the array by creating a dim variable that adds them statically one at a time:
Dim finalvalue As Integer finalvalue = week(1) + week(2) + week(3)
That works, except as time goes on there are more weeks and I need to dynamically add all the values together in one fell swoop.
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
I'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
Attached file 140625 box adds.xlsm has three textboxes that are totalled in the fourth box.
The Code updates the total automatically as you ENTER numbers into cells, and overcomes "blanks", but I need it to update the total if you delete any of the three numbers.,
As shown below, I set the Code to "Exit Sub" if a cell becomes blank, but can't see how to invert it without going through the same "checking" process twice for the other cells.
As the Code structure is essentially the same for each box, I've just shown the first one here:
VB: Private Sub TextBox1_Change() If TextBox1.Value = "" Then Exit Sub [code]....
I have a button that a user clicks to print the info they entered. I need some code to add a running count to a cell (say, H2) every time the user clicks that button and runs the print macro.
number for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
I am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it. been trying to figure out a macro so when you press the update button it then just updates the monthly total.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible. If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
In an excel work shift schedule, I am trying to total the total number of days someone is scheduled for different shifts. I can get a total for the current schedule but I want to be able to have a year to date total as each new schedule is added in. These totals are in the AF through BC columns in the xray shift totals in the attached worksheet.
I don't know if it is possible or not and am working on a pre-existing worksheet.
Sub sumbotton() Dim ar As Range Dim rng As Range Set rng = Selection.CurrentRegion Set rng = rng.Resize(rng.Rows.Count + 1) rng.Rows(rng.Rows.Count).Select For Each ar In rng.Areas ar.Resize(1).Offset(ar.Rows.Count) = "=SUM(" & ar.Address & ")" Next ar End Sub
I have a sheet in my workbook with at least 180 small tables, there may be more. I woulds like to be able to change total formulas for all tables at once to show either year-to- date or total year.
For example: If we have only progressed through the second period of the year, I would like to choose something to indicate period 2. At other time I may want to know the total year whether the periods are completed or not.
I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
