I want my macro to transform the cells whom values are visible into pure value no formula "behind them". I have simple multiplication formulas in those cells. If The result of a multiplication is 0 and I format that cells to not show me that 0 with "0.000;-0.000;;@" the macro still deletes the formula from that cell.
[Code] .....
I have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25
- on a different column every month (same column across all tabs)
- on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
I have a workbook with two tabs, Summary & January. The january tab has total expenses for the month of january that are subtotaled by last name. i.e. (baker total, decker total..). I would like to be able to use a formula on the summary tab to pull the values of each of the totals for each person from the january tab to the summary tab.
I tried on the summary sheet doing =jan and selecting the first persons name and then going back to the summary tab and dragging that formula down but it pulls all of the other data within the subtotal on the jan tab and I just want each persons total.
I am trying to calculate the average of the absolute values of a range of visible cells. I use filters to extract the data rows I need from a large spreadsheet. Then I need to calculate statistics on the resulting data, i.e. the visible cells. The line I am using to calculate this is:
VB:
ThisWorkbook.Sheets("Tracker Channel Stats").Cells(newRow, 4).Value = WorksheetFunction.Average(Abs(R.SpecialCells(xlCellTypeVisible)))
However, what I get back is simply the value of the first visible cell in the range, i.e. the average of the absolute value of one number is that number. how to make this work
I am using the code below to "swap" the selected cell values in a column with the ones to the right of the selection. It works fine on unfiltered sheet, but if I apply an Autofilter, it copies both visible and hidden cells, and I only want to swap visible cells. What to modify?
[Code] .....
How do I modify the following formula to work for visible cells only:
=IF(J2=J1,K1+1,1)
For your information the formula is filled through K2:K2122
How can I transform a text string into a formula. ='F1'!$C$2
This appears as a text and I want to convert it to a formula exactly like it's written. I made this formula like this because I need to get the value from 1000 sheets. So I use the formula to change the sheet number automatically.
But now I can not convert the text into a real formula.
I know that I could do it with a macro but I prefer to do it without using a macro.
I have a table with data and I want to transform the data in table 1 to the format in table 2 with a formula. I want to change the table format since I have data with 12 000 rows in table 2 format. I haven't been able to find any formula that works, so I will try to explain my problem
Table 1: How the data looks like
Account number
Account Name
Description
2013-01
2013-02
2013-03
2013-04
2013-05
4010
Bank
Sales
0
10
0
5
0
[Code] ........
Table 2: How I want the data to be transformed
Account number
Account Name
Description
Month
Amount
4010
Bank
Sales
2013-02
10
[Code] ........
1. The same accounts are used several times, but with different description or months.
2. All "0" values are eliminated in table 2.
My first thought was to use a pivot table, but I can't use it on sheet 1 since each month become a separate value.
Maybe there are some setting in pivot tables that makes it work, but I would prefer a formula to solve the problem.
In the sample worksheet, I need VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
sample2.xls
Have a slightly unique issue that I can't seem to find the specific solution for. I am wanting to filter a range, using row 1, then copy the visible cells (Excluding the title row 1) and paste into the same location, so over the data as Values.
I can do the filtering part and the selection of the visible row. Only trouble is pasting it to the same location.
this is the code so far - anything better would be great
Sub Macro2()
Sheets("GF_Scoring Database").Activate
Dim extvalue As String
Dim rng As Range
[Code]....
in the sample worksheet, I need help with a VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
View 3 Replies View RelatedI have a column of cells (say N7:N149) for which I would like to count the number of times text is visible, as some are blank. Normally I would go =COUNTA(N7:N149), but in this instance the cells are only blank because I have related them to adjacent cells and nominated "" if those adjacent cells are blank, therefore when I use my =COUNTA(N7:N149) formula it gives me a total of 143 (149-7).
View 7 Replies View RelatedI have a spreadsheet that includes a column with location names and a column with location numbers. What I need to do is count the visible unique numbers and names (seperately) in a certain column when using a filter. I have found the formula to count the unique values and a formula to count the visible cells, but not a formula that does both.
View 5 Replies View RelatedI currently have the formula =Countif(E5:E158,"YES"). This formula works great if when I dont filter, however, I need to filter through the data and I only want it to count the cells that have "Yes" when it is filtered, not just all the cells. I searched to forums and people keep referencing Subtotal() however that is counting all the cells and not pulling out the "Yes" inputs only.
View 2 Replies View RelatedEvery time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
I have a table with autofilter enabled
I also have a cell that is supposed to show the sum of values in column C, cell C1
But the things is, the sum formula gets the sum of everything in column C.
I only want the formula to add items when it's visible in the table.
If I want to know the total expenses on bond paper, I select bond paper in column D's filter Then the expenses will show up with bond paper but I till get the sum of everything in Cell C1.
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I have Sheet1 and Sheet2. On Sheet2 I have some filtered items.
Now, is it possible to link the filtered items to Sheet1, e.g. =IF(Sheet2!B1=IsVisible;Sheet2!B1;"")
I do not want to make a copy/paste/vba turnaround.
I have a macro which autofilters a range of cells.
I can count the number of visible rows by using the following code
Code:
lcountActive = Range("BC34:BC" & x).SpecialCells(xlCellTypeVisible).Count
What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.
In a workbook some of the numbers I have to use are in format: 12,50. How can I modify the formula so it transforms it to 12.50 (so that excel knows this is a number)? I am getting the values with:
View 7 Replies View RelatedNeed to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI have a data table with all my data in it. I want to be able to filter the data, and have a column automatically calculate a running (or aggregate) sum of the filtered (visible) information in a particular column of the table.
If you glance at the attached sample spreadsheet (in 2nd post!), you will quickly see what I mean. I am searching for a formula for column L that will caculate a running sum for column K. In column T, you can see the results that I'm looking to reproduce in column L. Each cell in column T simply adds the K column value for that row to the previous value in column T (the cell above). However -- to my knowledge, and as in this case -- the formula for column T can only be copied down the column AFTER the table has been filtered.
I have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedI have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -
I have finished a huge project. The final step is sending emails.
I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'
Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).
So need a loop to do for each cel in rng.Column(5)
.Attachments.Add rng.Cells(cel.row?,5)
Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?
I have a need to sum only the visible cells in a row. Certain columns are collapsed depending on the month and there is a YTD colum that I only want to pick up the expanded or visible cells. I found a custom function listed below at Microsoft's website but it only allows for a single range to be entered and I need to pick 12 individual cells, for example A1, C1, E1, etc. There is other information in the cells between and that is why the range won't work. Is there a better way to do this or can this function be modified to allow me to do this?
Function Sum_Visible_Cells(Cells_To_Sum As Object)
Application.Volatile
For Each cell In Cells_To_Sum
If cell.Rows.Hidden = False Then
If cell.Columns.Hidden = False Then
total = total + cell.Value
End If
End If
Next
Sum_Visible_Cells = total
End Function
I need to transform many text (that Looks like numbers) in to numbers. The thing is that, there is an option to search for errors in the "formulas" menu, but I want a code in vba that I can run.
so in conclusion the thing is:
1. look for text that "looks like" numbers
2. turn them into numbers
there is a ONE column containing data. it looks like 7 rows of content, 2 blanks, 7 rows of contant, 3 blanks etc. there can be more than 1500 rows in this document.
i am looking for a macro which would copy these 7 VERTICAL rows in 1 column and transform them into a NEW HORIZONTAL ROW IN 7 COLUMNS.
step by step it would be like:
- copy 7 rows in 1 column
- transform it into 1 row, 7 colums and put it ONE ROW ABOVE THE ORIGINAL
- delete original 7 rows in 1 column
i did macro by recording the whole action but it works only for first repeat. it does not work then because the macro keeps the row number and rewrites the content. i would need a macro which works independently of the row number.
Is there a ATransform or replace command in Excel. i have a value of 04/23/09 which is a date and would like to replace all "/" with "-' thereby making the value 04-23-09. I could examine each character value within a cell but this would just make a long coding and would like to know if there's a shorter way to do this?.
View 4 Replies View RelatedI have a spreadsheet which has data in the format of
Name
Address
City
State
Zip
Phone
This appears in the form of rows. How do I make the data in a table meaning,,,
Name Address City State Zip Phone.