i found this example of a combobox at http://msdn.microsoft.com/en-us/library/ms996411.aspx. but I don't think it is for excel. Is there anyway I can use code to make it so my combobox's list will be like the picture so it shows all the words instead of cutting them off?'
View 5 Replieshow can i make the drop down box bigger to display my text?
heres my problem
http://img220.imageshack.us/my.php?image=probij1.png
Is there any way witch i can use to make the auto-filter range bigger than 1000 cells?
View 2 Replies View RelatedIs there a forumula that will allow me to find the smallest number in A1:A10 that is also larger than the number in B1?
View 14 Replies View RelatedI have a list with random ordered numbers (each number in a cell of a row): 1, 2, 6, 8, 11, 12, 16...
On the other hand I get a value (x). I want a formula that:
- If x is in the list, returns x
- If x is not in the list, returns the next higher value. For example, if x=8, returns 11
I want also a variation of the same formula, that returns the next lower value. For example, if x=8, returns 6.
Note that x will never be smaller than the first number on the list or higher than the highest number in the list.
I have the following code in a userform_initialize
ComboBox10.AddItem "0"
For x = 1 To 13 Step 1
ComboBox10.AddItem Format(x, "0")
Next x
ComboBox10.Value = Sheet4. Range("H25").Value
ComboBox10.ListIndex = 0
I would like to make the list index = 13 if the Label.Caption associated with the combobox = "Spare". I have 'Option Explicit' turned on & I get a message 'variable not defined'. How would I code this properly or more to the point I guess, what is the variable I should be using?
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies View RelatedI have constructed a user form with a set of comboboxes containing a number of choices. However, the different alternatives depend on each other, and instead of having all the choices available in the second combobox I would like to only have the "correct" ones depending on the choice made in the earlier combobox.
For example;
---------------
A-B-C
Car-Blue-USA
Car-Red-USA
Truck-Green-Sweden
Truck-Blue-Sweden
If I choose Car in the first combobox, I would like to only have the choices [Blue, Red] available in the second combobox, not the full set of data [Blue,Red,Green] and so on. However, I have two problems construction this;
1) If I make the rowsource A1-A4 for the first combobox, I get the alternative [Car,Car,Truck,Truck], not [Car,Truck]. It is possible to come around this problem by making a unique list in addition to the linked list showed above, such as;........
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies View RelatedI am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies View RelatedBasically I have a giant list (50,000+) of area codes (like 312, 216, 517, etc...) and I would like to make a new column right next to that, which takes those area codes and transcribes them into states so it would be (IL, OH, MI, etc...)
I have a table on the 2nd page of my excel workbook which has every single area code listed in column A, and in column B it has all the state symbols. I got it from here: .....
A
B
c
d
[Code]....
So the data I put in Is Cells A to D the reast are calculated for me. so for example E2 is looking down column D to see if the number matches the number in A2, If any of them do it will put the name in the corresponding cell in E2 (Or you ca use a different cell if you prefer) so in this case D3=A2 so B3 is the answer also in the cell next to it I need whatever number is the cell next to the answer so in this case C3
I have a list of 200,000 e-mail addresses in a excel document in column A. What i am trying todo is find all the duplicate e-mail addresses within the list that appears more than four times.
I have tried this forumla in colunm B so it lists how many times the record appears: =countif($A$2:$A$244270,A2) which works fine and then a number appears next to each record. Then i pressed the sort filter to arrange all the records in number order so all the 5's are at the top of the worksheet but that does'nt always list them in the correct number order.
Basically all i want todo is find all the records that appear in my list more than five times then make a list of just one of those 5 records so i can remove them from my e-mail system.
Basically I have a giant list (50,000+) of area codes (like 312, 216, 517, etc...) and I would like to make a new column right next to that, which takes those area codes and transcribes them into states so it would be (IL, OH, MI, etc...)
I have a table on the 2nd page of my excel workbook which has every single area code listed in column A, and in column B it has all the state symbols. I got it from here: [url]
How would I go about making this new column on page 1 of my workbook which takes all the area codes I have and makes a brand new list of the states by looking up the area code/state table I have on page 2 of the workbook?
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies View RelatedAs you can see in the picture, the box which I am writing in won't get bigger. I want it to cover the whole workscreen, but so far nothing has worked.
View 3 Replies View RelatedSometimes my brain just fails me and I'm pretty sure this is a simple one:
In M5:
IF(ISBLANK(L5), (Use whichever number is greater: G5 or H5), (otherwise Subtract L5 from greater of G5 or H5))
The jist of the problem is that employees are paid their normal wage up untill 37.5 hours of work. From 37.5 to 40 hours of work they are paid 1.5 times their wage. Any hours over 40 are paid at 2 times the regular wage.
So i need a formula that can work out their total pay. Im not sure what i could put in a dummy document to help you since it would just be one cell for their hourly wage, one for their hours worked and then one for the calculation. so you can reference any cell as an example and assume £6 as hourly rate
I have a list of names in column A, don't know how many different names but for sure some of them repeats in different cells of column A.
A1 = NAME_1
A2 = Alan
A3 = Ben
A4 = John
A5 = Alan
A6 = Kevin
A7 = Mark
A8 = Dominic
A9 = John
A10= Tom
A11=Alan
A12=Frank
How can I make aonther list in column B, which contains a list of name in column A without repeating. So that B1 = NAME_2, B2:B4 is exactly like A2:A4, then B5 = Kevin, B6 = Mark, B7 = Dominic, B8 = Tom, B9 = Frank.... and so on. Another question, which is very similar to the previous one. In the same column A, now I add an AutoFilter (Data > Filter > AutoFilter) in A1. A drop down arrow button will appear at the right side within A1. Click the down arrow and another box shows: Sort Ascending, Sort Descending, All, Top 10, Custom, Alan, Ben.... the rest of the data in Column A but each unique data will only shows once in that list. How can I copy the contents of that box?
I have a file about 13 Megs. I deleted a lot of data and saved it. It was 1 Meg bigger. I closed it, reopened, saved again. 700 k smaller than before, but still bigger than original. That is strange. There must be a way to get the dirt out.
View 9 Replies View RelatedNeed Help in resolving the following issue:
Update a list using a Combo Box works fine when the list is on the same worksheet but when the list is on a different Worksheet it does not work.
Is this achievable? I guess so! but was wondering how to do it.
e.g: if my range defined name called let us say "SP" with a range AD1:AD60 in Sheet1 when I use a combo box the Listfillrange will contain: SP
When inserting a new entry using the combobox it works fine but when the same defined name range points to a different Worksheet example: Sheet2 then the update does not work although the ListFillRange contains the same Range name: SP.
how I can list 3 different values to a list of list of 3 in a combo box, is.
combo box
select high = 35
select middle 30
select low = 25
I have the names in the box I just need it to add a value (which I have listed 1 in each separate cells) to each selection
Imagine this..
In Column A I have 500 email addresses.
In Column B I have 2000 email addresses.
Now in Column C, I want to have all the email addresses in Column B MINUS all the email addresses in Column A.
IE: So basically if Column B had 300 of the same email addresses in Column A, then Column C will have 1,700 email addresses (2,000 - 3000) = 1,7000.
I want to make a list from data table in Sheet1. In order to make the list I use Quantity value in B column at data table.
For example;If quantity is 50,List will be 50 rows with the data columns.
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
I would like to add a combobox and would like to add/delete items to the list box.
View 9 Replies View RelatedI am trying to filter a list for a ComboBox using VB.
I have the following
Defined Name 'MemMapSel'
1stCol 2ndCol 3rdCol 4thCol 5thCol
Alarms a BOOL 2001 4000
Commands i BOOL 4001 5000
Status s INT 7001 8000
Free x DINT 9001 10000
etc
etc
I am using a combobox to select which row i require and am mapping the 4thCol to a cell
At present the property 'ListFillRange' is set to 'MemMapSel' displaying all 5 columns and bounding column 4 as the value
What i really need is to Filter this list, so that the combobox only displays the BOOL entries in the 3rdCol, or the INT, etc
I think i can use the Select function to do this, but i am not sure how to go about it.
Trying to get the list from a combobox in an online form. I'm doing this as a check to make sure what I need to be there is there. Then the macro will select what I need and move on. If not found in the list, then it will move on...
So I start thinking about it and I'm not quite sure how to do that in Forms. Does ListIndex get me there?
I'm unable to give the site because you'd have to login with a password, but here's the code I have to Set the combobox:
Set PartNumOffr0EDrop = .Document.all.Item("PartNumOffr0EDrop")
myVal = PartNumOffr0EDrop.ListIndex
I need to know how to loop through the combobox and store the value of each member of the list to a variable or cell.