Move Specific Data To Another Spreadsheet In The Same Workbook
Jul 5, 2007
What I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
View 9 Replies
ADVERTISEMENT
Nov 25, 2008
I have a spreadsheet that I have variable data in and I want to transfer specific parts of the workbook into a Word doc.
Not a problem with the Excel part, I can select each and every cell that I want, copy them and then...
Recording a macro hasn't done the trick as the code I have only copies and doesn't paste. I know I can edit the code to open Word but the problem is that when in Word, the data needs to go to very specific places, some of it goes in the header, most goes in the main body, I can't see how this could be done as there are no cell refs as in Excel!
is it possible to paste to say halfway in a sentence, in a macro?
View 9 Replies
View Related
Jun 4, 2009
I m moving a spreadsheet to the end of a workbook, however the amount of spreadsheets in the workbook increase each day.
Two files will be involved in this macro. 1) Headset Out Time and 2) Headset Out Time "Month". Where month is the current month.
Command Button 2 located on the file Headset Out Time will execute the macro. The macro will open Headset Out Time "Month" then move the first spreadsheet (different name on a daily basis), from Headset Out Time to the end of the workbook Headset Out Time "Month". Then it will reset the spreadsheet (this part i can handle)
View 3 Replies
View Related
Jan 6, 2013
I'm looking for code that will move the cursor after the "enter" key is pressed through specific cells/order listed in the code, which can be changed as required. Using the option/tools cursor movement affects all excel documents which we don't want - just the specific sheet we are working in.
View 5 Replies
View Related
May 29, 2014
I'm looking to write a macro code that copies two specific columns to a separate spreadsheet in the same workbook, and then sort the rows by values in ascending order.
View 5 Replies
View Related
Jun 24, 2014
Currently i hav list of info that is long like this.
A 1
B 2
C 3
D 4
E 5
F 6
G 7
H 8
I 9
J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7
B 2 E 5 H 8
C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2
C3 D4
E5 F6
G7 H8
I9 J10
Sub test()
Dim rng As Range, m As Integer, c As Range
Columns("c:E").Delete
m = 2
Set rng = Range(Range("a1"), Range("a1").End(xlDown))
Set c = Range("a1")
Do While c <> ""
'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy
Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True
Set c = c.Offset(m, 0)
Loop
End Sub
View 2 Replies
View Related
May 9, 2014
How to do what I am about to ask takes time and time causing brain overloading. I have made screenshots but I can't upload them. I get red exclamation point with images sizing ~55KB
View 9 Replies
View Related
Jun 28, 2007
I have a complex data set that has been imported into Excel from a binary data file and I am looking for a way to simply pull out specific fields. I tried to record a Macro that would simply delete the rows between the data rows I want to keep, but it always references itself to those same ranges and I'm not sure how to identify that I want it to sequentially move down the page deleting the same number of rows, and adding the row of information I want to keep as it goes.
View 9 Replies
View Related
Aug 27, 2013
What I am trying to do is to automate a copy-and-paste situation for literally a few thousand items. I am creating .xml files for a scenery builder library for MS Flight Simulator, and unfortunately there isn't an application specifically for FS scenery that will import the data I have and export it into the format I need. In other words, I need to create a form in Excel into which I can automate the importation of data from text files (such as in the first example below) to populate fields (as in the second example), and later create a new text file from the compiled data.
This is an example of the format of the data I need to import:
C3745848A201404D875D85A92A7CFA0C Shell
C3745848A201404D875D85A92A7CFA0D Texaco
C3745848A201404D875D85A92A7CFA0E TAG HEUER
[Code].....
View 5 Replies
View Related
May 22, 2014
I have a large spreadsheet which contains multiple rows of rate data by employee. I have sorted by effective date with most recent date on the top to get the most recent rate of pay, however, is there a way or formula to be able to identify or extract the previous rate of pay after that? I have included a sample below. There are different #'s of rows of rate of pay based on how long someone has been in company, as well as different rates of pay and effective dates.
Employee #
Name
Rate of Pay
Eff Date
655220
John Smith
$ 99,000.00
1/1/2014
[Code] ..........
View 3 Replies
View Related
May 9, 2013
I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB:
Private Sub CommandButton1_Click()
Dim f As Double
Dim t As Double
[Code].....
View 1 Replies
View Related
Dec 27, 2011
I have data on Sheet2 and would like to only copy all rows associated with column D2 to the Sheet3. For example Sheet2 has two different values Voice or Data I would like to copy all rows associated with column D that contains voice to Sheet3.
View 4 Replies
View Related
Feb 23, 2014
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies
View Related
Feb 19, 2014
I have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies
View Related
Jul 22, 2009
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
View 9 Replies
View Related
Sep 12, 2006
I created a new workbook that contains a list of additional design requirements than our old checklist. These requirements are answered by placing a 1, 0 or .5 in the cell next to the requirement (1 = yes, 0 = no and .5 for half credit). I can't simply go to the old workbook/worksheet and copy the results into the new workbook/worksheet as the rows of requirements don't match up since some requirmements have been deleted and new ones added between the old and new checklists.
I created a command button in the new checklist and what I want it to do is:
- open a dialog box that lets me select the old checklist file (these are all excel files, but with different names).
- go the the proper worksheet in the old file (DFT Checklist) and copy a column of results from the old checklist ("DFT Checklist" worksheet) and paste them into the proper cells of the new checklist ("DFT Checklist" worksheet).
- The macro would know (i'll have to tell it) which requirements and cells are still valid answers between the old checklist and the new one. It would disregard requirements that are no longer in the new checklist.
- Once complete, it would close the old checklist without saving.
View 4 Replies
View Related
Jun 9, 2014
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
View 9 Replies
View Related
Jun 1, 2007
I need to have totals from individual worksheets automatically enter into cells in a master spreadsheet.
What I am doing is keeping track of donations collected from individual departments - each on their own worksheet. I would like to have the totals of each page automatically enter & update onto a master worksheet that would show the totals from each dept and then give me a total of all those.
I am not that well versed in Excel. I have been able to set up the individual worksheets and the master.....but can not figure out how to accomplish what I want with the Master tally sheet.
On the individual worksheets I also want to set it up to give me the average donation per person. So if I total the # of donors and the total $$$ amount...what formula do I use to get the average?
View 15 Replies
View Related
Dec 12, 2012
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
View 4 Replies
View Related
Dec 11, 2013
I'm trying to link specific data from one workbook to another. So from the demo I've attahced, I need all of the 3rd row "ATP BASIC SERVICE : 1" to be linked to another workbook.
So normaly I could copy the row, go to the other workbook, "paste special" and link it to a column.
The only problem is the "ATP BASIC SERVICE : 1" data will not always be on the 3rd row.
So i assume I would need to automatically search for "ATP BASIC SERVICE : 1" and if it is found, copy the column over to the other workbook.
View 4 Replies
View Related
Feb 18, 2014
I'm trying to import a range of cells from one workbook to another. I've got this far with it but am getting a Runtime Error '1004'.
Sub ImportData()
Application.ScreenUpdating = False
Set wb1 = ActiveWorkbook
[Code].....
View 3 Replies
View Related
Aug 19, 2008
Need to move data from 14 sheets (1 pay period=14 days)(2 showing on attachment for example purposes) to time cards for each person (number of employees will vary).
Key data to move to the time card is the date of the hours, #Reg Hours, #OT hours, the ticket# and job# for those hours.(ie Chris Adams Aug 15, need Chris's Reg and OT hours (8 Reg and 2 OT) on his time sheet, and the corresponding ticket number and job number (in this case from I1, I2).
Unknown number of ticket/job numbers, but the pattern of cell entries will remain the same along the top of the date sheets.(starting at I1, then L1, O1, the next would be R1)
Unknown number of employees but they will continue filling down where the names are on the date sheets (column A). Each employee would have a time card sheet as well.
View 5 Replies
View Related
Jan 6, 2010
Need the code to put into a command button which jumps from the cell selected, X number of cells to the right. Also will need the code to jump back again when clicking on a different command button.
View 5 Replies
View Related
Nov 12, 2012
I'm working my way through a list of companies on an excel spreadsheet and making some notes.
After i've spoken to them its a simple keep them on the sheet in the current position or highlight the row red and move to the bottom or when they become a customer highlight green and move to the bottom.
I have a coloumn called customer (J) is it possible if i put a Y in that cell to make the row green and move to the bottom and also if i put a N in the column make the row green and move to bottom.
View 8 Replies
View Related
Dec 16, 2009
I am trying to write a set of code, part of which involves moving a shape around an excel spreadsheet in a square shape within a certain range. It is based on a random number generator. The shape moves a number of cells to the left/right/up/down depending on the random number (d) multiplied by 16. If the shape reaches a row or column border point, it will change direction but continue moving in the new direction until it has gone as far as was determined by the random number (*16). I have some code which works fine... to a point! The shape starts out, reaches a right hand border, changes direction to go up, reaches another border, changes again and goes left, but then when it comes to change dorection the 3rd time and go down, it fails. The direction of the shape is determined by a word in cell A1 - left/right/up/down:
Sub MoveRed()
Application. ScreenUpdating = True
Dim d As Integer
Dim i As Integer
d = Range("AZ1").Value
With ActiveSheet.Shapes("RedDot")
For i = 1 To 16 * d
Select Case Range("A1").Value
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
View 9 Replies
View Related
Aug 28, 2009
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :-
Workbook1 is having sheet named aa, gg, tk .....
Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
View 6 Replies
View Related
Mar 26, 2014
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
View 9 Replies
View Related
Jan 15, 2010
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
View 9 Replies
View Related
Dec 4, 2013
I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
View 3 Replies
View Related
Dec 16, 2007
I am working on the attached price proposal and need my user to be able to enter a number into column E indicating that that row should be printed on the quote. The 'quote' can be new sheet or another area of current sheet that is formatted to look like letterhead.
View 4 Replies
View Related
