Move Spreadsheet To End Of Workbook
Jun 4, 2009
I m moving a spreadsheet to the end of a workbook, however the amount of spreadsheets in the workbook increase each day.
Two files will be involved in this macro. 1) Headset Out Time and 2) Headset Out Time "Month". Where month is the current month.
Command Button 2 located on the file Headset Out Time will execute the macro. The macro will open Headset Out Time "Month" then move the first spreadsheet (different name on a daily basis), from Headset Out Time to the end of the workbook Headset Out Time "Month". Then it will reset the spreadsheet (this part i can handle)
View 3 Replies
ADVERTISEMENT
Jul 5, 2007
What I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
View 9 Replies
View Related
Jan 6, 2010
Need the code to put into a command button which jumps from the cell selected, X number of cells to the right. Also will need the code to jump back again when clicking on a different command button.
View 5 Replies
View Related
Nov 12, 2012
I'm working my way through a list of companies on an excel spreadsheet and making some notes.
After i've spoken to them its a simple keep them on the sheet in the current position or highlight the row red and move to the bottom or when they become a customer highlight green and move to the bottom.
I have a coloumn called customer (J) is it possible if i put a Y in that cell to make the row green and move to the bottom and also if i put a N in the column make the row green and move to bottom.
View 8 Replies
View Related
Dec 16, 2009
I am trying to write a set of code, part of which involves moving a shape around an excel spreadsheet in a square shape within a certain range. It is based on a random number generator. The shape moves a number of cells to the left/right/up/down depending on the random number (d) multiplied by 16. If the shape reaches a row or column border point, it will change direction but continue moving in the new direction until it has gone as far as was determined by the random number (*16). I have some code which works fine... to a point! The shape starts out, reaches a right hand border, changes direction to go up, reaches another border, changes again and goes left, but then when it comes to change dorection the 3rd time and go down, it fails. The direction of the shape is determined by a word in cell A1 - left/right/up/down:
Sub MoveRed()
Application. ScreenUpdating = True
Dim d As Integer
Dim i As Integer
d = Range("AZ1").Value
With ActiveSheet.Shapes("RedDot")
For i = 1 To 16 * d
Select Case Range("A1").Value
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
View 9 Replies
View Related
Dec 3, 2013
creating some VBA code to move the last sheet in my active workbook to come before all the other sheets in the same workbook.
View 2 Replies
View Related
Jan 22, 2013
I tried to move a tab to a new Excel workbook. You may say that it is very straightfward to do it: right click the tab and then do 'move' or 'create a copy'.
I found the problem is that the whole color will be completely changed and look bizarre. I really like to get a genuine copy of the tab: all remains the same.
View 5 Replies
View Related
Apr 8, 2009
I know this is a simple operation, but I'm new and a little slow with macros. I've gotten the code I have so far and would like a little more with my next step.
View 3 Replies
View Related
Aug 16, 2008
I have a set of worksheets that need to be moved to their own individual master sheets. i.e. FW32Lightning.csv needs to be moved to Lightning.xls which has all of the fiscal weeks in it as seperate. I know the generic way of doing this, but I need to know how do I write the macro that when I run it every week I don't have to go in and change the fiscal week.
View 5 Replies
View Related
Feb 1, 2008
I have recorded a Macro but cannot figure out how to edit it to accomplish my goal beyond the first use.
I want to to Highlight a Row in Worksheet A, ( Amazon Open.xls ) - Run my Macro to Cut that Row -- then Open Worksheet B (Amazon Sold.xls) and Paste that row into the next unused Row. Then copy Cell L in that row to clipboard.
Heres what I have recorded -
View 9 Replies
View Related
Apr 14, 2008
I have an original workbook. Also I have saved a "copy of the original Workbook". So the sheets and other headers are same. Now i want that If i delete a row in Original Workbook then the row should go out from origianl workbook and copied to "Copy of Orinal Workbook" in the same sheet from the the row is being deleted. Suppose row 7 of sheet1 is deleted, then the data of the row 7 from the original WB should go to row 2 of Copy of origianl WB (Being the first empty row. Similary if any row is deleted from sheet2 of Original Wb, the same should go to first empty row of Sheet 2 of Copy of Original WB. By this I want to keep a record of those rows which are deleted from the original Wb for future reference.
View 2 Replies
View Related
Dec 8, 2011
I need to be able to copy a worksheet from my ActiveWorkbook into a new workbook and save that new workbook. No problem doing that, the following code does it:
Code:
Dim wb As Workbook
Worksheets("Alpha").Copy
Set wb = ActiveWorkbook
wb.SaveAs "Master.xls"
wb.Close
Where I am running into the problem is I am needing to copy the 2nd worksheet form about 10 different workbooks into this same workbook.
View 3 Replies
View Related
Jan 16, 2007
I am working on code to move worksheets to existing workbooks based on the filename in a cell value. Here are my questions...
1.Does the destination workbook need to be opened before I can move a worksheet there?
2. How can I write the code to take the sheet name which is also in column A of "Data" sheet and the path or destination to move the sheet name to the path that is in column B of the "Data" sheet?
3.Can someone help me with the code?
All the worksheet names and copy destination is in the "Data" sheet. Here is what I have for code...
_____________________________________________________
Dim wbBook As Workbook
Dim qsSheet As Worksheet
Dim dsSheet As Worksheet
Dim wsSheet As Worksheet
Dim dpStart As Range, dpData As Range
Dim ptStart As Range, ptData As Range
Set wbBook = ThisWorkbook
Set qsSheet = wbBook.Worksheets("Query")
Set dsSheet = wbBook.Worksheets("Data")
Set wsSheet = wbBook.Worksheets
With dsSheet
Set dpStart = .Range("A2")
Set dpData = .Range(.Range("A2"), .Range("A65536").End(xlUp))
Set ptStart = .Range("B2")
Set ptData = .Range(.Range("B2"), .Range("B65536").End(xlUp))
End With
For Each wsSheet In ThisWorkbook.Worksheets
If Not wsSheet.Name = "Data" And Not wsSheet.Name = "Query" Then
wsSheet.Copy
View 9 Replies
View Related
Sep 8, 2006
i have a workbook with picture and that workbook in share mode.
i have to move picture in share mode.
View 4 Replies
View Related
Sep 12, 2006
I want to copy old worksheet from old.xls (screen 1) to new book new.xls
(screen 2 ) on an extended desktop.
Screen 1 containing old.xls file in originally opened excel.
Screen 2 has new file new.xls in newly opened excel.
Dragging over is unsuccesful.
So is Edit-Move or Copy to new.xls.
View 8 Replies
View Related
Jan 23, 2008
1. I receive a weekly report 'Over Due Orders_1_14_08.xls' for example. This is sent every Monday and there is a Worksheet on this report called Raw Data.
2. I want to copy Raw Data from that Workbook but the name of the report changes w/ every Monday's date.
Any way of doing this - like just looking for "over due orders" in the Workbook name?
View 5 Replies
View Related
Mar 14, 2012
I have the following Pivot Table:
Business DeveloperDonna HoffmanCount of Activity CountDate Client NameContact NameActivity Name3/5/20123/6/20123/7/2012Grand TotalxxxxxxxxxxxxxD'Agostino, Esq., Michael C.Email Sent (CLIENT)11xxxxxxxxxxxxxxxx11xxxxxxxxxxxxxxMartin, DavidEmail Sent (CLIENT)11xxxxxxxxxxxxxxxxxx11xxxxxxxxxxxxxxxxxxYoder, MichaelEmail Sent
[Code] .......
I would like to filter by Business Developer and copy and paste all text to a new workbook. I would need to repeat the same code for all Business Developers and the number of columns will vary.
This is the code I have so far. I get an error msg when it tries to paste the data to the new workbook.
Code:
Macro5 Macro
' Macro recorded 3/14/2012 by MPS Group
'
'
ActiveSheet.PivotTables("PivotTable2").PivotFields("Business Developer"). _
CurrentPage = "Donna Hoffman"
Columns("A:L").Select
[Code] .........
View 1 Replies
View Related
May 10, 2007
I need a macro that will take each worksheet in my file & create a new workbook for each. The new workbook name will need to be the original worksheet name. The number of worksheets & the worksheet names will very each time I run this code.
View 9 Replies
View Related
Jul 21, 2008
I have this code so far using Macro Recorder but i wanted to change a few parts which i am not too sure how to do:
Its basically supposed to look in specified folder for all files, move them to Main Workbook & rename them slightly
Sub getcsv()
Workbooks.Open Filename:= _
"C:Documents and SettingsSlimDesktopPositionsChartsAUDCADm1440.csv"
Sheets("AUDCADm1440").Select
Sheets("AUDCADm1440").Move After:=Workbooks("Position Risk Calc v9.8.xls"). _
Sheets(23)
End Sub............................
View 9 Replies
View Related
Jul 22, 2009
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
View 9 Replies
View Related
Aug 14, 2006
What I want to try and do is move certain worksheets if their name is changed into another workbook. So there are two scenarios:
1. If any worksheets name is changed to begin with "Old", then it is automatically moved to a workbook called "OldPlans"
2. If any worksheets name is changed to begin with "Expired", then it is automatically moved to a workbook called "ExpiredPlans"
When worksheets are moved to new workbook I would like them to be positioned towards the end of the workbook. So I am not sure how to go about this, first would it have to have a Name Change Event or something to trigger off what gets moved?
View 5 Replies
View Related
Sep 6, 2006
copying within a workbook...
I have an external .xls file I'd like to copy to a new directory from within VBA. I know how to create the directory, but is there a way to do it other than opening the required file, and doing the " saveas" thing?
Can I just create a copy directly?
View 5 Replies
View Related
Oct 21, 2013
Identical Data exists on Sheets1 and 2 (A3:V50)
A3:A50 = human names
B3:V50 = numeric values
I'm trying to VBA code:
If human names on Sheet2(A3:A5) match human names on Sheet1(A3:A5)
Move Sheet2 matching name row(s) to the bottom of the data range on Sheet2.
Sheet1
Sam 4 4 4 4 4 4 4 4 4 36 4 4 4 4 4 4 4 4 4 36 72
Bill 4 4 4 5 4 4 4 5 4 38 5 5 4 4 4 4 4 4 4 38 76
Bob 5 5 5 4 4 4 5 5 5 42 4 4 4 4 4 4 4 4 4 36 78
[Code] ......
View 3 Replies
View Related
Sep 17, 2009
I'm working with transcribed comments from patient satisfaction surveys. The goal is to produce a single Excel file that contains all of the positive comments from source files where physicians are mentioned by name. Our vendor notes this by preceding any person's name with an asterisk (e.g., *Dr. Smith or *Doctor Smith"). I've attached a sample source file (Ambulatory.xls), so you can see what I'm starting with (I've deleted the identifying data in columns B, C, and D).
I'm looking for the appropriate VBA code to cut and paste the row in one file (in this case, Ambulatory.xls) to a separate Excel file (Weekly Physician Comment Report.xls) IF the cell contents in column G of that row contain either of the following text pieces:
*Dr
*Doctor
Each week's file will obviously have an unknown number of total rows - and will contain lots of positive comments that DON'T mention a physician by name. In the file I've attached here, for example, there is only one such comment (highlighted in yellow). I simply want to cut and paste the rows with physician names into the new file. If you can provide me with the code to do this for this example file, I can repeat the process for my other files (there are 6 source files in all).
View 6 Replies
View Related
Sep 12, 2006
I created a new workbook that contains a list of additional design requirements than our old checklist. These requirements are answered by placing a 1, 0 or .5 in the cell next to the requirement (1 = yes, 0 = no and .5 for half credit). I can't simply go to the old workbook/worksheet and copy the results into the new workbook/worksheet as the rows of requirements don't match up since some requirmements have been deleted and new ones added between the old and new checklists.
I created a command button in the new checklist and what I want it to do is:
- open a dialog box that lets me select the old checklist file (these are all excel files, but with different names).
- go the the proper worksheet in the old file (DFT Checklist) and copy a column of results from the old checklist ("DFT Checklist" worksheet) and paste them into the proper cells of the new checklist ("DFT Checklist" worksheet).
- The macro would know (i'll have to tell it) which requirements and cells are still valid answers between the old checklist and the new one. It would disregard requirements that are no longer in the new checklist.
- Once complete, it would close the old checklist without saving.
View 4 Replies
View Related
Jan 16, 2010
I have 2 separate Excel 2007 workbooks and I’m trying to import a complete spreadsheet named Client Info with all its properties from one workbook to another.
View 2 Replies
View Related
Apr 15, 2011
In versions prior to Excel 2007, I was always able to copy a chart when I copied a tab. However, when I copy a tab in 2007, the data copies fine, but the chart does not. Something similar happens when I try to move a tab with a chart on it to another workbook.
View 5 Replies
View Related
Mar 15, 2013
I have a Reporting workbook I designed. There is a "Parent" workbook with the following design.
It has 6 Pivot Tables on a Sheet called "Data"
It has 6 Pivot Charts that were created from these tables on a page called "Summary"
These 6 Pivot Charts are all linked through a pair of slicers.
There is a "control" page which has instructions and buttons that trigger "Refresh All" and "Create Child Workbok".
This design is so that someone unfamiliar with excel could conceivably create the final product.
Essentially I have written/put together VBA to Create a new workbook "child" which has should be a funcitoning copy of the "parent".
The problem is the copiedmoved (I have tried both) Pivot Charts no longer update/refresh when the pivot tables change. I have script that reconnects the Pivot Tables to the Slicers. Slicers are fully funcitonal. Links in cells are fully functional.
Some of this code might look familiar.
Code:
Sub createWB()
' Copies VBA modules, Calls
Dim wbNew As Workbook, wbT As Workbook
Set wbT = ActiveWorkbook
On Error Resume Next
Kill ("PATHmod1.bas")
Kill ("PATHmod2.bas")
[code].....
View 2 Replies
View Related
Apr 18, 2013
I am trying to use a macro to move a range of excel tabs to the front of the workbook however some of the tabs could be missing due to no information.
If I simply record the macro by moving them manually if the procedure arrives at one that is missing it would report an error.
So in essence I need it to look for the tab and if its there move and if its not move onto the next until it arrives at the last one.
View 9 Replies
View Related
Jun 9, 2014
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
View 9 Replies
View Related
