I have recorded a Macro but cannot figure out how to edit it to accomplish my goal beyond the first use.
I want to to Highlight a Row in Worksheet A, ( Amazon Open.xls ) - Run my Macro to Cut that Row -- then Open Worksheet B (Amazon Sold.xls) and Paste that row into the next unused Row. Then copy Cell L in that row to clipboard.
Heres what I have recorded -
I created a new workbook that contains a list of additional design requirements than our old checklist. These requirements are answered by placing a 1, 0 or .5 in the cell next to the requirement (1 = yes, 0 = no and .5 for half credit). I can't simply go to the old workbook/worksheet and copy the results into the new workbook/worksheet as the rows of requirements don't match up since some requirmements have been deleted and new ones added between the old and new checklists.
I created a command button in the new checklist and what I want it to do is:
- open a dialog box that lets me select the old checklist file (these are all excel files, but with different names).
- go the the proper worksheet in the old file (DFT Checklist) and copy a column of results from the old checklist ("DFT Checklist" worksheet) and paste them into the proper cells of the new checklist ("DFT Checklist" worksheet).
- The macro would know (i'll have to tell it) which requirements and cells are still valid answers between the old checklist and the new one. It would disregard requirements that are no longer in the new checklist.
- Once complete, it would close the old checklist without saving.
I am having rows of data, that i will be updating from time to time. I want excel to move the latest updated rows, in any column if updated, to move to the top, to easiy know that i updated those records. It should be that when i updated more rows than one, then the first updated cell would be in lower, in order, than the latest updated cells. I do not want any cumbersome vba. I want in formula or in conditional formatting. The row no may be total not limited to some rows.
Because, you naturally would have updated the 200 th record and would have saved. It saved as it is, so when you next opens it it is there, but how can i know that that is the last row of data i edited.
creating some VBA code to move the last sheet in my active workbook to come before all the other sheets in the same workbook.
View 2 Replies View RelatedI tried to move a tab to a new Excel workbook. You may say that it is very straightfward to do it: right click the tab and then do 'move' or 'create a copy'.
I found the problem is that the whole color will be completely changed and look bizarre. I really like to get a genuine copy of the tab: all remains the same.
I know this is a simple operation, but I'm new and a little slow with macros. I've gotten the code I have so far and would like a little more with my next step.
View 3 Replies View RelatedI m moving a spreadsheet to the end of a workbook, however the amount of spreadsheets in the workbook increase each day.
Two files will be involved in this macro. 1) Headset Out Time and 2) Headset Out Time "Month". Where month is the current month.
Command Button 2 located on the file Headset Out Time will execute the macro. The macro will open Headset Out Time "Month" then move the first spreadsheet (different name on a daily basis), from Headset Out Time to the end of the workbook Headset Out Time "Month". Then it will reset the spreadsheet (this part i can handle)
I have a set of worksheets that need to be moved to their own individual master sheets. i.e. FW32Lightning.csv needs to be moved to Lightning.xls which has all of the fiscal weeks in it as seperate. I know the generic way of doing this, but I need to know how do I write the macro that when I run it every week I don't have to go in and change the fiscal week.
View 5 Replies View RelatedI have an original workbook. Also I have saved a "copy of the original Workbook". So the sheets and other headers are same. Now i want that If i delete a row in Original Workbook then the row should go out from origianl workbook and copied to "Copy of Orinal Workbook" in the same sheet from the the row is being deleted. Suppose row 7 of sheet1 is deleted, then the data of the row 7 from the original WB should go to row 2 of Copy of origianl WB (Being the first empty row. Similary if any row is deleted from sheet2 of Original Wb, the same should go to first empty row of Sheet 2 of Copy of Original WB. By this I want to keep a record of those rows which are deleted from the original Wb for future reference.
View 2 Replies View RelatedI need to be able to copy a worksheet from my ActiveWorkbook into a new workbook and save that new workbook. No problem doing that, the following code does it:
Code:
Dim wb As Workbook
Worksheets("Alpha").Copy
Set wb = ActiveWorkbook
wb.SaveAs "Master.xls"
wb.Close
Where I am running into the problem is I am needing to copy the 2nd worksheet form about 10 different workbooks into this same workbook.
I am working on code to move worksheets to existing workbooks based on the filename in a cell value. Here are my questions...
1.Does the destination workbook need to be opened before I can move a worksheet there?
2. How can I write the code to take the sheet name which is also in column A of "Data" sheet and the path or destination to move the sheet name to the path that is in column B of the "Data" sheet?
3.Can someone help me with the code?
All the worksheet names and copy destination is in the "Data" sheet. Here is what I have for code...
_____________________________________________________
Dim wbBook As Workbook
Dim qsSheet As Worksheet
Dim dsSheet As Worksheet
Dim wsSheet As Worksheet
Dim dpStart As Range, dpData As Range
Dim ptStart As Range, ptData As Range
Set wbBook = ThisWorkbook
Set qsSheet = wbBook.Worksheets("Query")
Set dsSheet = wbBook.Worksheets("Data")
Set wsSheet = wbBook.Worksheets
With dsSheet
Set dpStart = .Range("A2")
Set dpData = .Range(.Range("A2"), .Range("A65536").End(xlUp))
Set ptStart = .Range("B2")
Set ptData = .Range(.Range("B2"), .Range("B65536").End(xlUp))
End With
For Each wsSheet In ThisWorkbook.Worksheets
If Not wsSheet.Name = "Data" And Not wsSheet.Name = "Query" Then
wsSheet.Copy
i have a workbook with picture and that workbook in share mode.
i have to move picture in share mode.
I want to copy old worksheet from old.xls (screen 1) to new book new.xls
(screen 2 ) on an extended desktop.
Screen 1 containing old.xls file in originally opened excel.
Screen 2 has new file new.xls in newly opened excel.
Dragging over is unsuccesful.
So is Edit-Move or Copy to new.xls.
1. I receive a weekly report 'Over Due Orders_1_14_08.xls' for example. This is sent every Monday and there is a Worksheet on this report called Raw Data.
2. I want to copy Raw Data from that Workbook but the name of the report changes w/ every Monday's date.
Any way of doing this - like just looking for "over due orders" in the Workbook name?
I have the following Pivot Table:
Business DeveloperDonna HoffmanCount of Activity CountDate Client NameContact NameActivity Name3/5/20123/6/20123/7/2012Grand TotalxxxxxxxxxxxxxD'Agostino, Esq., Michael C.Email Sent (CLIENT)11xxxxxxxxxxxxxxxx11xxxxxxxxxxxxxxMartin, DavidEmail Sent (CLIENT)11xxxxxxxxxxxxxxxxxx11xxxxxxxxxxxxxxxxxxYoder, MichaelEmail Sent
[Code] .......
I would like to filter by Business Developer and copy and paste all text to a new workbook. I would need to repeat the same code for all Business Developers and the number of columns will vary.
This is the code I have so far. I get an error msg when it tries to paste the data to the new workbook.
Code:
Macro5 Macro
' Macro recorded 3/14/2012 by MPS Group
'
'
ActiveSheet.PivotTables("PivotTable2").PivotFields("Business Developer"). _
CurrentPage = "Donna Hoffman"
Columns("A:L").Select
[Code] .........
I need a macro that will take each worksheet in my file & create a new workbook for each. The new workbook name will need to be the original worksheet name. The number of worksheets & the worksheet names will very each time I run this code.
What I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
I have this code so far using Macro Recorder but i wanted to change a few parts which i am not too sure how to do:
Its basically supposed to look in specified folder for all files, move them to Main Workbook & rename them slightly
Sub getcsv()
Workbooks.Open Filename:= _
"C:Documents and SettingsSlimDesktopPositionsChartsAUDCADm1440.csv"
Sheets("AUDCADm1440").Select
Sheets("AUDCADm1440").Move After:=Workbooks("Position Risk Calc v9.8.xls"). _
Sheets(23)
End Sub............................
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
What I want to try and do is move certain worksheets if their name is changed into another workbook. So there are two scenarios:
1. If any worksheets name is changed to begin with "Old", then it is automatically moved to a workbook called "OldPlans"
2. If any worksheets name is changed to begin with "Expired", then it is automatically moved to a workbook called "ExpiredPlans"
When worksheets are moved to new workbook I would like them to be positioned towards the end of the workbook. So I am not sure how to go about this, first would it have to have a Name Change Event or something to trigger off what gets moved?
copying within a workbook...
I have an external .xls file I'd like to copy to a new directory from within VBA. I know how to create the directory, but is there a way to do it other than opening the required file, and doing the " saveas" thing?
Can I just create a copy directly?
Identical Data exists on Sheets1 and 2 (A3:V50)
A3:A50 = human names
B3:V50 = numeric values
I'm trying to VBA code:
If human names on Sheet2(A3:A5) match human names on Sheet1(A3:A5)
Move Sheet2 matching name row(s) to the bottom of the data range on Sheet2.
Sheet1
Sam 4 4 4 4 4 4 4 4 4 36 4 4 4 4 4 4 4 4 4 36 72
Bill 4 4 4 5 4 4 4 5 4 38 5 5 4 4 4 4 4 4 4 38 76
Bob 5 5 5 4 4 4 5 5 5 42 4 4 4 4 4 4 4 4 4 36 78
[Code] ......
I'm working with transcribed comments from patient satisfaction surveys. The goal is to produce a single Excel file that contains all of the positive comments from source files where physicians are mentioned by name. Our vendor notes this by preceding any person's name with an asterisk (e.g., *Dr. Smith or *Doctor Smith"). I've attached a sample source file (Ambulatory.xls), so you can see what I'm starting with (I've deleted the identifying data in columns B, C, and D).
I'm looking for the appropriate VBA code to cut and paste the row in one file (in this case, Ambulatory.xls) to a separate Excel file (Weekly Physician Comment Report.xls) IF the cell contents in column G of that row contain either of the following text pieces:
*Dr
*Doctor
Each week's file will obviously have an unknown number of total rows - and will contain lots of positive comments that DON'T mention a physician by name. In the file I've attached here, for example, there is only one such comment (highlighted in yellow). I simply want to cut and paste the rows with physician names into the new file. If you can provide me with the code to do this for this example file, I can repeat the process for my other files (there are 6 source files in all).
In versions prior to Excel 2007, I was always able to copy a chart when I copied a tab. However, when I copy a tab in 2007, the data copies fine, but the chart does not. Something similar happens when I try to move a tab with a chart on it to another workbook.
View 5 Replies View RelatedI have a Reporting workbook I designed. There is a "Parent" workbook with the following design.
It has 6 Pivot Tables on a Sheet called "Data"
It has 6 Pivot Charts that were created from these tables on a page called "Summary"
These 6 Pivot Charts are all linked through a pair of slicers.
There is a "control" page which has instructions and buttons that trigger "Refresh All" and "Create Child Workbok".
This design is so that someone unfamiliar with excel could conceivably create the final product.
Essentially I have written/put together VBA to Create a new workbook "child" which has should be a funcitoning copy of the "parent".
The problem is the copiedmoved (I have tried both) Pivot Charts no longer update/refresh when the pivot tables change. I have script that reconnects the Pivot Tables to the Slicers. Slicers are fully funcitonal. Links in cells are fully functional.
Some of this code might look familiar.
Code:
Sub createWB()
' Copies VBA modules, Calls
Dim wbNew As Workbook, wbT As Workbook
Set wbT = ActiveWorkbook
On Error Resume Next
Kill ("PATHmod1.bas")
Kill ("PATHmod2.bas")
[code].....
I am trying to use a macro to move a range of excel tabs to the front of the workbook however some of the tabs could be missing due to no information.
If I simply record the macro by moving them manually if the procedure arrives at one that is missing it would report an error.
So in essence I need it to look for the tab and if its there move and if its not move onto the next until it arrives at the last one.
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
