I have data that is formatted in an Excel 2010 table. The two columns in question are [Invoice #] and [Description]. In the description column I have descriptions of products as well as freight. The same invoice number would be tied to the product description as well as its associated freight. I need to filter out certain product types and their associated freight items.
The macro I wrote creates an array of invoice numbers that I want to filter out and leave the remaining invoices, but I can't get the filtering part to work. Here is my code:
Dim Invoices() As Variant 'array of invoice numbers Dim Descriptions() As Variant 'array of Descriptions Dim InvoiceFilter() As Variant 'array of invoice numbers to filter Dim i As Integer 'counter Dim j As Integer j = 1
[Code]...
What happens now is that it filters out all values in the Invoice column instead of only the values in the InvoiceFilter array.
On this is a column of Categories and a Column of sizes. I want to use these in a user form. The user will select their Category from a drop down list and the second drop down list will include only the sizes that appear next to the chosen category So for example in the attachment if the user chose 'AUD' as a category they would get the size choices of, '2x4 insert', '2x4 replica' and 'A4L' in the other drop down menu.
The master list of sizes will have to remain on a worksheet as this is what other operators will amend from time to time.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB: Public Sub DelRows2() Dim Cel As Range, searchStr, FirstCell As String Dim searchRange As Range, DeleteRange As Range
When the checkbox is checked, add the cell next to it to t a listbox in another sheet. (in the sample, the result ,must appear in sheet "relatorio", inside the yellow cells)
When the checkbox is unchecked , remove that item from the listbox.
I have a list box in the userform. I would like to add items into ListBox which correspondent with 4 combo box values. If all combo boxes is selected, that would be easy task. However, user might not need to select all combo boxes. If any of the combo boxes empty, my code fails that end up listbox is empty. I could write the code with all of the combinations, but that will be my last choice if there is nothing easier than that. Can I adjust the code such as if the combo box="" then skip then look at the other combo box if that is "" than skip again. If all combos are "" add all the items from the source.
My code is below:
AllStaffLB is listbox StaffSrchCB is combo box StaffSrchCB2 is combo box
Code: Set my_array = Sheets(1).ListObjects(1).DataBodyRange
Column number 2 contains numbers, but I want to 'reset' all the numbers in the second column. How can I do that? I know I can do a loop through all the elements, but I thought it would be smarter if I could set the entire column as zero in the array?
How would the attached file code be ammended to remove a blank row and then move all remaining rows below up one ?
Example: Open the attached file (Transport Log version 1). If you double-click in cell "X10" (for patient Abe Lincoln), the data for row 10 will be removed and written to Sheet #2. Closing the file and reopening, row 10 is empty with other rows below remaining. The goal is to move the data in rows 11 and 12 (and any subsequent rows that may be entered below those) up one row.
The above method would be an indication to users making subsequent entries to always use the first empty row below all existing data.
I have two large spreadsheets that are arrays. Column A contains 40 items in both files. Columns B through X contain unique names. The arrays are filled with dollar amounts. Is there some formula or function in Excel whereby I can easily combine both spreadsheets, essentially adding the dollar amounts for each corresponding cell?
I'm needing to import a .csv into another software and it needs the fields formatted a specific way.
The spreadsheet I've been given has columns for different departments and an X to denote if they fall under it. As an example.
Name Sales OHS HR
Joe Bloggs X X
Bob Smith X
John Doe X X
For the import into this software it needs the fields like this, the name in the cell has to be exactly the same as the column header.
Joe Bloggs Sales HR
Bob Smith OHS
John Doe OHS HR
Is there an easy formula to scan the row, if an X is found substitute the X for the column header text and if no X in a cell delete it and shift all cells to the left within the row ?
The substitution is quite easy and I've played around with lookup or if statements to quite easily do that but the bit I'm having trouble sorting is removing any unnecessary cells in that row so only cells with data are listed in the row.
I have Workbook A populated with skus from a report and I want to remove all rows in this workbook that do not have a matching sku in Workbook B. Each workbook contains only one sheet and the skus are in column 1 of both workbooks.
Also, I am looking for a good resource/tutorial for working with workbooks, worksheets and ranges within. I don't anticipate this being the last time I will be confronted with this and would like to learn more.
it is possible to hide empty cells when using a ComboBox in a UserForm?
I have named the range from where I select my data and used the RowSource (ComboBox Properties window) to determine the selection. This works perfectly but I have many lines that are empty and I would like to know if they can be hide, or not selected, in the combobox.
I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
I've created a range B3:B12 in which each cell returns TRUE of FALSE. There corresponding values are listed in C3:C12. I have the same thing again in D3:D12 and E3:E12. Checkboxes link to the TRUE/FALSE cells. Attached is a stripped down file to show this.
I want to create a formula that lists each item in the one cell (no spaces required inbetween) for use with a search. I know a long winded way to do this involving many IFs but any array will be much more tidier, thing is I hardly use arrays and have struggled with this one.
I'm thinking it will be along the lines of =IF(B3:B12="TRUE",C3:C12,"")&IF(D3:D12="TRUE",E3:E12,"") but exactly what it should be is beyond me.
EDIT: The original file attached was corrupt for some reason, the new attachedment is the same except instead of TRUE/FALSE cells I've set them to 'x' for quickness (lost my work...!).
I am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
I need to query table contents where some general items are met, and item id's are not contained in an array.
Example: Code: SELECT LOOKUP.*, LOOKUP.Var FROM LOOKUP WHERE ((LOOKUP.Name)="test" Or (LOOKUP.Name)="test2" AND ((LOOKUP.Type)=3) AND ((LOOKUP.Var) ("array", "of", "items")))
I need to know how to add an array to a query since I can't hard-code the list each time, and the array can be a different size each time, so using array variables doesn't make sense here.
I have a table into which I paste values to ColumnA. The other columns have formulas. The number of values to be pasted varies. When the number being pasted this time is less than the number pasted last time, empty rows remain above the valid data after sorting, which is undesirable. I want to get rid of those rows just before (or after?) pasting the new values. The way I see it is I want to delete all but the first data row of the table so the formulas remain untouched in the first row. Then, as new values are pasted the formulas replicate automatically.
I have a col of dates that change, 9/15, 10/15, 11/05 and reside in col. I I then have a corresonding cell in row I136, M136, Q136, U136, Y136 and AC136. I want to find the starting at the earliest date starting in I36 , M136, Q136...
So I136 would be updated to 9/15, M136 = 10/15, Q136 = 11/05, ...
I am thinking a CSE type formula would be a possibility, but need assistance in this or in a piece of code..
Passing an array from a sub to another sometimes works, sometimes not. But when I call the same sub twice, it definately gets stuck at least at the second time. Seems as if I tend to lose some of my items of the array. And I cannot figure out why it happens, at what pace it happens or how I could stop this from happening.
1.Could it be that a control perishes as soon as it is set to 'ctrl.enabled=false'? 2.Or could it be that a declared array 'ary=array(tb1,cb1,frm1)' can not be handled without having had its items initialized with some lines of code, although the items visibly exist within the user form? 3. Can it be that a Sub 'remembers' the former values passed to it, if set to 'optional'?
However, I have added a cleared/minimized version of my userform as a file to this post, hoping that some of you out there might find the time to have a look at it.... I would really appreciate it. I have added the decisive parts of the macro below here, as well,
Private Sub UserForm_Initialize() Dim elem As Variant Dim wSht As Worksheet Dim ctrl As Control 'set control arrays '[...] ctrlAllStep2 = Array(cbTimeOnly, cbIntensityOnly, cbAreaOnly) '[...] ctrlAllStep3 = Array(tbIntensityTotal, tbIntensityBleached) '[...]
MsgBox "Two Controls exist now: 1." & ctrlAllStep2(0). name & ", 2. " & ctrlAllStep2(1).name, vbInformation, "Note: controls exist..." 'disable Controls in Step2 and in Step3....................
