Removing Blanks From Dropdown?
Jun 21, 2013
I have a dropdown in which a state can be selected. A second dropdown then retrieves and displays a list of the counties in that particular state that the user can choose from.
The available county list is retrieved using an array formula:
{=IFERROR(INDEX(RatingTables!$MF$8:$MF$3195, SMALL(IF(LandingPage!$G$20=RatingTables!$ME$8:$ME$3195, ROW(RatingTables!$ME$8:$ME$3195)-MIN(ROW(RatingTables!$ME$8:$ME$3195))+1, ""), ROW(B1))),"")}
and there are a variable number of counties in each state, so I have dragged the formula quite far down the column.
The problem is that because of this, my county dropdown has quite a few spaces at the end of its selection list (depending on the state). I've attemped to remove them using a dynamic table (the available counties populate in column R):
=OFFSET(LandingPage!$R$1,1,,COUNTA(LandingPage!$R:$R)-1)
but it still includes the spaces at the end of the dropbox scroll list.
View 1 Replies
ADVERTISEMENT
Dec 8, 2009
In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
http://www.excelforum.com/excel-work...om-a-list.html
Columns A:H in the same worksheet are populated and unavailable for use.
View 8 Replies
View Related
Feb 20, 2014
I created a macro to create the beginning of a pivot table- just the rows and slicers, because when I tried making a longer macro to create the entire pivot table (formatting, etc) I couldn't get the macro to work.
So I do get all the vertical rows I want, and I do get all the slicers I want. But I get blank space. I think this is because the pivot table is created from another tab, and the length of data in that tab will vary from file to file (I'm doing another 30 or so of these, all with varying amounts of data, but the same data categories).
Anyway, I get slicers, but in addition to getting the categories I want, I also get "(blank)" below the names in the slicers. Is there a way to add some code to the macro to remove the blanks so I don't get this field?
I have copied and pasted the macro below, with identifying data changed.
View 4 Replies
View Related
May 26, 2014
I am trying to create a straight column list that can take the rows and columns of a table, and list only the nonblank items. The formula I am using only seems to work with one column, not multiple.
Formula:
[Code] .....
View 12 Replies
View Related
Feb 19, 2010
1.How can i tidy up Dropdown for name without showing blanks when i scroll ?
2.For ID & Batch How can i get data to appear automatically picking up from Sheet 1 based on Name selected. I know how to use vlookup but in VB im still learning.
3. How can i get ONLY ID & Batch (Not name) information to appear in sheet2 in Cell B10 & Cell B11.
4. How can i limit the task txt entry to only 18 characters to appear in B12 ?
5. How to Loop this when clicked Next and then start entering info again so that the next entry appears in B13 (ID), B14 (Batch), B14(task) and so on.....
6. How can i prefix a txt string e.g ($GA (Hidden to user entering) say txt entry e.g (Dance) that is going to appear in Sheet2 in B14 reslut($GA:Dance)
View 13 Replies
View Related
Dec 12, 2013
On the Control Panel sheet of the attached book, I need to load only the non blank cells from BQ3:BQ9 into a data validation drop down.
View 8 Replies
View Related
Jul 21, 2014
How can I get the dropdown list to not include blank cells in the list reguardless if the sort filter is used or not.
Sheet 1 (STATS) is the dropdownlist Cell B12
Sheet 2 (Orders) is the data, I cant convert to tables because the cells are active and storted Column B2: is the data named.
so I have to use a formula to do this.
Using Excel 2010
See attached sample
Sample.xlsm
View 7 Replies
View Related
May 13, 2012
I would like to be able to make the same thing and select items for my drop down list, that are not blak and follow a specific condition. But I don't know how to include the condition in the array formula.
The condition I need is follow:
I want to have a dropdown list with Items that are not blank, and First N > Last N.
[URL]
It would be preferred to have formulas.
View 5 Replies
View Related
Mar 7, 2014
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
View 14 Replies
View Related
Jun 20, 2014
I am having trouble delete a drop down list inspite of selecting clear all from the data validation tab in excel 2007. When I hit Alt + Down Arrow, I still see picklist options. I didnt set up the spreadsheet, hence I am not sure how to begin troubleshooting.
View 1 Replies
View Related
Apr 16, 2014
I have an data in a columns. Here I need to count the non-blanks and blank records.
View 5 Replies
View Related
Mar 11, 2013
I am trying to pull data from more than one drop down but don't the same data to show if already use, example as follow:
First drop down Contains:- Pants
Shirts
Hats
Shoes
Dresses
if I chose Hats it should not show up in the second drop down
second drop down Contains:- Pants
Shirts
Shoes
Dresses
Is this done in data validation or combo Box? if so how?
View 2 Replies
View Related
Jan 15, 2009
Doing an IF statement. To perform for cell that are blank is " ". How do you peform the equivalent for non-blanks i.e. any data at all.
View 3 Replies
View Related
Sep 20, 2008
The following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?
How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?
I have 2 more questions within this .....
View 13 Replies
View Related
Nov 26, 2008
I have a range I would like to select but this includes blanks. I would like the VB to skip these blanks and find the last value / text in this row and then select that entire row.
Here is part of the code I have:-
View 3 Replies
View Related
Oct 31, 2012
I need to create a macro that searches for blanks in column G, from row 2 to the last row of the worksheet, and then inserts the value 1 in these blank cells.
I have been copy pasting different solutions from this site and amended them a bit, but my excel skill are not sufficient for this.
View 5 Replies
View Related
Feb 11, 2008
In order to produce my report I am trying to use a MACRO:
I have a column of data in row AZ. I do an AutoFilter for BLANKS. Then I want to put the word "non-base" into each blank cell in column AZ. I put the word "non-base" into the first row in column AZ. I then try to copy down the "non-base" to the end of the filtered data (all the blanks). I have tried to double click, I have tried to do CTRL End DownArrow but it just goes to the end of the spreadsheet instead of to the end of the filtered data.
I have copied the data and then held down the SHIFT key in the last cell and pasted in the data. This works but when the new data comes in, the following week, the number of blanks will be more or less than the last weeks data and my macro fails because it may or may not get ALL the data.
I need to get to the LAST BLANK CELL OF FILTERED BLANKS EACH TIME, replace the Blanks with "non-base" and have it do it consistantly.
View 9 Replies
View Related
Apr 9, 2008
I have this code that checks for cells that "" and then transfers a range to a separate sheet. I am running into problems if in the specified range all cells are "". How can I update this code to allow for all cells in the range to be "" without giving an error?
Sub Search_Notes_Main()
Application.ScreenUpdating = False
ActiveWorkbook.Sheets("Analyst Main").Select
Dim ConstantCells As Range, Cell As Range
Set ConstantCells = Range("B11:CX11").SpecialCells(xlConstants)
For Each Cell In ConstantCells
If Cell.Value "" Then Cell.Select
ActiveCell.Offset(-2).Range("A1:A4").Copy
ActiveWorkbook.Sheets("Notes & Ticklers Upload").Select
Range("B22").Select
View 9 Replies
View Related
May 21, 2009
I have numbers in Column A starting in row a1. Is it possible to fill the blanks with the preceding data with a macro? approx. 1500 rows
Before
a1:62700
a2:
a3:
a4:
a5:63000
a6:
a7:
a8:
a9:64000
After
a1:62700
a2:62700
a3:62700
a4:62700
a5:63000
a6:63000
a7:63000
a8:63000
a9:64000
View 9 Replies
View Related
Aug 11, 2009
I am after a formula that will calculate the blank cells since the last cell with a value in it.
Eg. I'm putting the formula in Column AW and have values in AH & AR and want to know the number of blanks since the last value which should be 4 in this case. I will need to copy this from row 1 to row 1000.
View 9 Replies
View Related
Aug 21, 2009
I'm currently working on a macro that looks in a column for non blanks.
I want it to check column B and I want it to paste any non blanks (numbers) to column C in the same row. Also, I don't want it to replace any values in column C with any blanks.
Here's what I wrote but it doesn't seem to work.
Sub rankthis()
Dim myCount As Integer
myCount = WorksheetFunction.CountA(Range("A:A"))
For Row = 1 To myCount
If Cells(myCount, 2).Value "" Then
Cells(myCount, 2).Copy
Cells(myCount, 3).PasteSpecial Paste:=xlPasteValues
End If
Next Row
End Sub
View 9 Replies
View Related
Apr 1, 2014
I'm trying to use Data Validation for cells. In these cells I only want a Y or N entry and cannot have blanks. I'm rusty on formulas.
This is what I've come up with
=IF(NOT(ISBLANK(B6))*OR(B6="Y",B6="N"),"TRUE","FALSE")
View 2 Replies
View Related
Aug 12, 2014
I am using a simple SUM formula like this, =SUM(D10:E10). I would like for the SUM cell to be left blank until a value is entered into the cells D10. Currently it calculates the SUM as 0.
View 13 Replies
View Related
Oct 6, 2008
I work in school which for example offers 20 courses for every student. Therefore I have a spreadsheet which has students name in A and B then the 20 courses spread from C to V.
Each student will study 3, 4 or 5 of the courses and will have value in the corresponding column (their teaching group) the rest of their row will be blank.
For each student create in columns X, Y , Z, AA and AB I would like to be able to pull from the 20 courses those which the student studies. Therefore finishing up with C to V hidden and just the student names and the 3, 4 or 5 courses they study.
Any ideas? if one method is to get them into one cell how do I get them into the 5 columns; i know DATA : Text to Columns but won't have anything to Delimit it with and can't use Fixed width as students will study subjects with different length charactors.
View 6 Replies
View Related
Oct 22, 2008
I have an array that includes blanks in it. What is the formula to use to output the array of values without the blanks? Example: I have an array (Cells A1:A10) with thirty blanks within this 10 cell array. I wish to have the list of non-blanks outputted, presumably to the next column (Column B).
Array A:
Joe
Stan
Bill
Bob
Jill
Jack
Judy
View 3 Replies
View Related
Jun 5, 2009
I need to sort a dataset by a column that may sometimes contain blanks. I'm sorting by time in decending order however excel is keeping any blank rows at the top.
Is there a way i can sort the column decending but keep the blanks at the bottom?
View 3 Replies
View Related
Jul 7, 2009
How can I minus 1 from this COUNTIF. Basically counting non blanks - but it keeps counting the title as well, even when i change it to start at row D2 (it just jumps back to D1 next time). =COUNTA(RAW_DATA_2!$D$1:$D$215)
View 4 Replies
View Related
Jul 9, 2009
how to set the format of a cell such that it will automatically add trailing blanks to the data entered into that cell while fixing the number of characters that could be entered into that cell?
View 3 Replies
View Related
Mar 4, 2013
I have a formula that needs to return blanks as blank and 0s as 0. The vlookup formula will return blanks as 0, or I can make it return a blank whenever it is zero (below), but some cells may have a 0 record that need to return 0s, not blank.
Right now I am missing a few records that are entered as "0". I have:
=IFERROR(IF(VLOOKUP(O16,'Sheet1'!$A:$Z,8,FALSE)=0,"",VLOOKUP(O16,'Sheet1'!$A:$Z,8,FALSE)),"")
View 5 Replies
View Related
Apr 22, 2014
I am using below code to filter my data.
[Code] .......
I want filter data with blanks cells.
View 10 Replies
View Related
