I'm trying to make a macro that will allow me to run multiple Goalseek in the click of a button. This I've been able to do but now I've included one more tweaking which is that I want the variable to change depending on the "method" (ie EBITDA or FMV). Yet I get an error message on the goalseek formula and I don't know what to do and how to solve it. See below for the "macro"
Sub Target_IRR()
If Range("C73") = "EBITDA" Then
For i = 94 To 96
Cells(i, 3).GoalSeek Goal:=Range("F93"), ChangingCell:=Cells(i, 4)
If Cells(i, 4) < 1 Then Cells(i, 4) = 1
Next i
ElseIf Range("C73") = "FMV" Then
For j = 94 To 96
Cells(j, 3).GoalSeek Goal:=Range("F93"), ChangingCell:=Cells(j, 5)
If Cells(j, 5) < 1 Then Cells(j, 5) = 1
Next j
Else: MsgBox ("No Variable")
End If
End Sub
I'm trying to create a macro to Goalseek after certain conditions are met and then loop until other conditions are met. In my worksheet, the reference cells for the macro are as follows:
a. Range (U94:DL94) as Cash Available b. Range (U95:DL95) as Distribution c. Range (U96:DL96) as Monthly Cashflow d. Range (U98:DL98) as the IRR calculation. IRR Calculation (If AT98 is active cell) = (1+IRR($U$96:AT96,0.01))^12-1. If AU98 is active cell, then IRR Calculation = (1+IRR($U$96:AU96,0.01))^12-1), etc.
I need the macro to do the following:
1) If value in range Cash Available > 0 and value in range IRR < 0.08, then goalseek (set cell = (range IRR), Goalseek = 0.08, Changing cell = (range Distribution)
2) If Goalseek result in range Distribution < value in range Cash Available, set cell equal to value in range Cash Available.
3) I need GoalSeek to loop until value in range Distribution > 0 and whatever cell in range IRR = 0.08.
4) After first cell in range IRR = 0.08, I need the macro to start again on the same named ranges but for different rows lower down on the spreadsheet and do the same loop, but this time for range IRR(2) = 0.15.
I have written a macro that uses the goalseek function over an entire column. It works and is a happy macro. the only problem with it that I see is that it currently cannot work through a filtered list. Say, for instance, you have a column(a) that adds column(b) + column(c). Lets say that there's 10,000 rows and of those, 8,000 have a value over 10. You apply a filter and view the other 2,000 rows with values less than 10. If you run the macro in its current state you'd apply the results to all 10,000 lines - but I wish to do it only over the remaining 2,000.
I'm certain that some variation of .SpecialCells(xlCellTypeVisible) will be used but I cannot determine where. Here's my code.
Sub TryMe() 'set the goalseek area answer = MsgBox("Please note that this macro only works on consecutive cells." & _ vbNewLine & "It will NOT work on a filtered list." & vbNewLine & vbNewLine & _ "Continue?", vbYesNo) If answer = vbNo Then Exit Sub End If
restart: With Application On Error Resume Next Application.DisplayAlerts = False ..............
I am posting this thread as a follow up to the previously posted thread entitled "IF Function and circular Reference". The reason I am changing the title because the topic we ended up talking about was not reflecting the previous title. My problem is that I got a range of independant cells (M7:M70) and the same number of dependant cells (BA7:BA70) as can be seen in the attached file. What I am trying to do is to make solver to find the value in the independant cell (e.g. M7) that makes the value in the adjacent (i.e. same row) dependant cell (e.g. BA7) equals 0. I can use solver for one row at a time but not for the whole range of cells. The question now is how can I use solver to do this task for the whole range M7:M70 simultaneously?
I'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
I need to assign the ID value to the cell in the source column when it matches the cell value in the email column.
i.e from the email column the first cell value is bobjohnson@email.com his ID value is 0 I need to find all the cells with bobjohnson@email.com in the Source column and assign them 0.
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I am in the process of reformatting an excel workbook to act as a review tool for different factors in a process. Part of my redesign includes the use of coding that creates different cell colors based upon the cell contents. The new workbooks will be used to handle existing data for this year. I have developed a process macro to open an existing workbook and copy and transfer the original data worksheet into the newly formatted workbook. The data gets transferred to the new worksheet and the resulting workbook is renamed and saved, Heres'' the rub... the newly saved workbook is missing all of the coding for the worksheets... apparently this is a MS bug.
Has anyone figured a workaround for this. One thought I had is to open both( new and old )workbooks and rather than move/copy , i would transfer the data using cell references.
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001 q9002 q9003 q9004 q9005 q9006 etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due. Column C is when bi-weekly inspection is due. Column D is when monthly inspection is due. Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
I am trying to find some VBA that will allow protected cells to be updated when a user enters or selects data in other cells.
For example:
Cell 'A1' starts out blank. Cell 'B1' has a drop down to select specific items. Cell 'C1' is the date of the order and is a locked cell. Cell 'D1' is the date of completion and is a locked cell. The worksheet is protected to prevent direct changes to cells C1 and D1.
If a user enters any information in A1, then C1 displays the current date. If a user selects 'Complete' from the drop-down list in B1, then D1 displays the current date. Both of these actions are independant of one another. This format is the same for every cell in the 4 columns indicated above. I thought I was able to do this in another spreadsheet I created a year or so ago but I have not been able to figure out what I did and I do not have the spreadsheet to look at.
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
I am trying to create conditional formating of a cell based on the value of another cell whish is linked to another sheet. I an using the "The formula is =$AA$30=1" where the cell AA30 is the cell linked to the other sheet. the problem is I have to do thiss for approx 200 cells ie =$AA$30=1, =$AB$30=1, =$AA$31=1, =$AB$31=1 --- =$AZ$42=1. Do I have to enter the formulea for each cell or is there a way to automate this?
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
I am working on a workbook with 200+ sheets and an index linking to each of the sheets. On the sheets there is a cell containing the results of calculations and I need the cell referencing the sheet in the index to change background colors depending if the calculations value is greater or less than 0. I currently have working code that also changes the tab color of each sheet depending on the value, but i am trying to add the index cell background change functionality into that. also, the index listings is subject to change. my working code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range) If Range("d34").Value < 0 Then Me.Tab.ColorIndex = 3 ElseIf Range("D34").Value > 0 Then Me.Tab.ColorIndex = 4 Else
[Code]...
and the code i am trying to get working is
VB:
Private Sub Worksheet_Change(ByVal Target As Range) Dim rngX As Range Set myRange = Worksheets("Index").Range("A1:A500").Find(Range("C2").Text, lookat:=xlPart) ' the C2 is the reference the title that would be on the index If Range("d40").Value < 0 Then
[Code]....
I keep getting the runtime error '1004: application-defined error or object-defined error the thing is, i ran the cell background changing code in a normal macro before integrating it in my other worksheet code first and it worked fine. I have a little code experience, though not much in vba and I am unsure what the issue is. if there is another better way to accomplish what I'm tring to do, that would also be fine.
