SUM Varying Ranges Based On Different Criteria
May 30, 2012
SUM formula. My spreadsheet has roughly 8000 rows of data listing client info for how many commercials were purchased on Cable Networks a (a simplified example)...
ABCDE1ClientNetworkDay-partPrioritySold2Client AHGTVAccess35063Client BHGTVPrime45014
Client CHGTVDaytime30095Client AHGTVPrime45096Client DHGTVPrime35037Client BHGTVPrime5502
What I am attempting to do is on Sheet2 summarize the commercials sold based on a starting Priority. So if the priority code in Column D is 350, I need to sum all spot sold at a priority of 350 and higher for each day-part and Network
ABCD1NetworkDay-partPrioritySold2HGTVPrime350 and up
?3HGTVPrime400 and up ?4HGTVPrime450 and up
?5HGTVPrime550 and up ?6HGTVPrime600 and up ?7HGTVPrime650 ?
I've attempted to create helper columns to tie all the necessary PR codes together and then SUMIF by the different helper columns, but I'm not getting the correct result. Instead of getting "15" for Sheet2, D2... I'm just getting "3"
View 5 Replies
ADVERTISEMENT
Aug 7, 2013
I am attempting to have cells in Column 'U' deliver different drop-down menus based on the corresponding value in column 'D'. I have created 7 named lists:
List_117G
List_152
List_JMET
List_XBAND
List_PACWIND
List_VORTEX
List_ROVER
Those lists will be called up based on 7 values in column “D”:
“G”
“152”
“J”
“X”
“D/E”
“V”
“R”
So far I have only been able to get this to work for the first category “G”. When I change the value of column “D” from “G” to “152” I no longer get a drop-down. Here is the formula I am using in the List function of validation.
=IF(D6="G",List_117G,IF(D6="152",List_152,IF(D6="J",List_JMET,IF(D6="X",List_XBAND,
IF(D6="D/E",List_PACWIND,IF(D6="V",List_VORTEX,IF(D6="R",List_ROVER,)))))))
View 2 Replies
View Related
Jul 2, 2008
What I'm trying to do is sum the daily interest of a loan for any range of dates. Imagine this example:
1) In column A you have dates from 01/01/2009 through 12/31/2059, with each individual day showing, so literally thousands of cells.
2) In column B you have just random values corresponding to each date, such as $100,000 on 01/01/2009, $139,000 on 01/02/2009, $52 on 01/03/2009, and so forth. These values occupy as many cells as the dates, i.e. there's a cash flow (value) for every date.
3) I want to run a formula in column C that will sum a date range I specify. For example, if I want to sum all the daily values for each month (i.e. the 1st through the 30th), or if I want to sum all the daily values for the 15th of a month through the 14th of the following month. In other words, the loan can start on any date, and I need to sum the interest for each "monthly anniversary."
4) I'm thinking that the formula will have to be different to sum an actual entire month. For example, formulas to sum from, say, the 15th of one month through the 14th of the next month, or the 10th of one month through the 9th of the next month, might be similar.
However, as there is a varying number of days in most months, that formula might not work (though I might be misunderstanding myself) when trying to sum the values for an entire month, i.e. February 1st through 28th. I think it might be solved by some sort of "if," such as if day = 1, then sum whole month, otherwise some from date through same date of next month less the last date's cash flows?
View 9 Replies
View Related
Dec 4, 2006
name data1 data2 total
chris a b 100
a a 100
a a 100
steve b b 90
b a 90
b a 91
jane b a 89
a a 90
a a 92
its hard to line things up in here..... anyway... each name has two more lines of data associated with it. i want to take the 4th column last line for each and sort from greatest to smallest and rearrange all the data but keeping all three lines associated with each person together. one added complication. the number of ppl in this will vary although i can do a count of every three lines and tell exactly how many there will be. so for this purpose we can just keep it at three.
in this case, all three lines associated with jane should be moved up above the three lines of steve but stay below the three lines of chris. and the three lines for each person stay in the same order they are now
View 9 Replies
View Related
Nov 12, 2006
I have a list of payroll data (Hours, Rate per hour & Total) for a number of workers. I want to summarize the data in ranges of hours and by ranges of rates in a table. This will then show me in what ranges of Hours & Rates is creating the most value (Total). See attached RangeSummary.xls for example data and output.
View 3 Replies
View Related
May 1, 2014
I've reached a point in this macro where I'm stuck with NO clue how to achieve this, or even whether it can be done. In the Before sheet below, I need to bold the cells in H & I if the word "Total" is in G. I could probably manage that part, but here's the weird part: I need to add a formula to H & I of each row with "Total" in G to sum the numbers above it, from the previous total down to the current total. But there's no telling how long each range might be on a given report; from 1 row up to 8 rows.
THEN, in the second row below the end of columns H & I, I need to put a formula totalling all of the preceding Totals
I wonder if there might be a way to tell it to put a formula in H by each cell that has "Total" in G, with the formula summing or subtotalling everything from the cell in H that has data in F to the cell just above the "Total".
Attached File : Acct Activity.xlsx
View 14 Replies
View Related
Jul 22, 2002
The following table is used in the sumif.
I would like the sumif to use the range with the names, and the range with the dates.
I have a GUI in which the user enters a name and a date and the $ amount earned for that week should appear.
The criteria is the name and the date.
******** ******************** ************************************************************************>
Microsoft Excel - Business Book.xls___Running: xl2000 : OS = Windows Windows 2000
(F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutP20=
IJKLMN3******4michaelb1*14$400.007/21/20025Michaelb1215$450.007/21/20026
[Code] .........
View 9 Replies
View Related
Jun 29, 2009
I am attempting to count records based on 3 criteria in 3 different ranges and am hitting a wall. My formula will be on a different worksheet as it is the summary sheet.
Worksheet "Cases"
Column E - Type
Column F - Month
Column G - Year
Worksheet "Recap"
Recap month will be input into Cell I5 eg. "6" for June
Recap year will be input into Cell K5 eg. "2009"
Cells N10-N15 is a list of Types
Summary Cell J10 will need to count if
1)worksheet Cases column E = worksheet Recap N10
2)worksheet Cases column F = worksheet Recap I5
3)worksheet Cases column G = worksheet Recap K5
View 9 Replies
View Related
Jan 17, 2008
I have a worksheet that has data in columns a through d. Acct#, Name, Usage Code, and Other Code. Acct# and Name are self explanatory, usage code is a two letter code, and other code is a field I added to use with my macro. A specific account number could be repeated many times, but it is the usage code I am needing to work with here. My acct numbers are sorted in numerical order and column d has a 1 each time a new account number appears and a 2 if it is a repeat. I am wanting to copy the account number of any account that does not have a specific usage code listed at least once. That specific code is "ta". I am wanting it to only list the account number once in column f starting at row 2. Here is my code that is not working.
Sub test()
Dim CopyNum As Integer
Set CopyNum = 2
Dim Switch1 As Integer
Set Switch1 = 0
View 3 Replies
View Related
Jul 7, 2009
I have a cell that I need to make a calculation if certain other cells =Y, or to show "0" if the other cells =N. I can do the calculation for the Y part but how do I add the N part of it? Here is what I have:
=SUMIF(J19:J40,"Y",H19:H40)*0.08
View 13 Replies
View Related
Apr 4, 2009
I have a spreadsheet that has two different data sources (i.e., A and B). The amounts of these data sources (i.e., the number of columns) varies from sheet to sheet. I have to calculate the averages of these data sources independently and together. Because this data is spread across twenty or more spreadsheets, these calculations can be time-consuming. I want to do the following:
1. Locate the last occurrence of the first data source "A" in row and then insert a column after that cell.
2. In that cell, I want to get the average of each data source for each row of data (i.e., there are always 19 rows of data).
I want to do the same two steps for the second data source "B". Then, I want to insert a column after the "B" average and this column will be used to get an average of each row of data from A and B together. Please keep in mind that the number of data sources for A and B varies from sheet to sheet.
So far, I am working on code to try to " find" the text in a range (i.e., find the last instance of "A"), but I cannot figure out how to get it to get it to stop at the last occurrence and then insert a column. I have some ideas about how to calculate the average, but any of yours are much appreciated.
Also, the row with the type of data (i.e., A or B) is named because this function is part of a larger macro. Therefore, it is relatively easy to get to it.
I have attached a version of the file that displays how I want it to look.
The code I have thus far is:
Cells.Find(What:=A, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 9 Replies
View Related
Sep 21, 2006
I currently have a report with so many large array formulas that it is virtually unusable. I want to use the DSUM formula in place of my array formulas but I am vexed in regards to creating a DSUM formula that I can put in the top-left cell of my report and then copy down to the bottom right side of my report. Currently, the array-formulas sum data from a large list when it meets two criteria -- one part of the data-record in the list must match the row label of the current row in the report and another part of the data-record in the list must match the column label in the current column of the report. I have found with the DSUM formula that you can use a "formula" criteria in place of a static criteria...the problem I am having is that the part of the formula that points to the data-set must be relative while the part that points to the formulas criteria needs to be static -- in order to be able to make one DSUM formula and copy it down and over I would need my formula criteria to have the opposite setup (with the data-set part static and the formula criteria as relative).
View 9 Replies
View Related
Jun 28, 2012
There are 11,000 rows and 4,000 are unique. The goal is to merge the data down to the 4,000 records. Each of the unique entries shows up 1 to 15 times.
In trying to solve this, I wonder if I should break this down into the different # of occurances and implement specific solutions. e.g., There are
5700 entries that show up 2x
504 that show up 3x
24 that show up 12x
View 3 Replies
View Related
Oct 2, 2013
I want to call a macro with a varying name that is within a module with the same name.
I have a module called Test1 and within this, a macro name called test1
I have a module called Test2 and within this, a macro name called test2
etc
On another module called Test8 (with the macro called Test8), this Test8 macro will call either Test1 or Test2 or Test3 etc depending on what I choose in an excel spreadsheet. So on sheet1, cell A1, there is a drop down with the options Test1 or Test2 or Test3 etc.
The following works to run the macro test1 from module test1 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test1.Test1
End Sub
The following works to run the macro test2 from module test2 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test2.Test2
End Sub
etc
However, if I try it so that the calling of the macro varies as below , it does not work:
Sub Test3()
MacroToCall = Sheets("Sheet1").Range("A1").Value
MacroToCall.MacroToCall
End Sub
View 7 Replies
View Related
Jan 18, 2014
I have a client where I have agreed to a variable price per hour depending on how many hours is used.
So the first 40 hours of a month costs X USD
The next 40 hours of a month costs Y USD
The next 40 hours of a month costs Z USD
The next 40 hours of a month costs Q USD
And all hours above 160 in a month costs T USD
All hours are registered as decimal with 15 minutes as a minimum, so 0.25, 0.5, 0.75, 1, 1.25 etc.
Now the challenge for me is to set up a formula calculating the total cost based on how many hours is registered each month.
I.e. if I register 46 hours in one month the first 40 hours should be multiplied by X and the last 6 hours by Y. And if I register 173 the calculation looks like this:
40 * X
40 * Y
40 * Z
40 * Q
33 * T
And I can't figure out how to make the formula calculate based on what is between the various intervals.
View 3 Replies
View Related
Oct 25, 2007
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies
View Related
Jul 25, 2011
I need to concatenate varying numbers of cells based on duplicates found in a separate column, but I'm not sure how to approach it. I have 41,000+ rows of data, so I have to find a formula.
Example:
1AB2Denton, PaulFB357D4D3OwensTest, MarcyFB539F934Brennan,
JosephFB539F935Bowser, AmyFB539F936LaRock, ChuckFB667D3B
Based on duplicates in column B, I want to combine the data in column A into one cell. The duplicates in column B could be only 2, or could be 20+.
View 2 Replies
View Related
May 5, 2013
I have a spreadsheet that has about 50 sheets and a summary sheet at the front the layout of the summary sheet is column A has skill sets from A4 to A20 and across the top it has week commencing dates from F3 to about BA3 (dates go from w/c 06/05/13 to 08/12/14). On the other sheets they have the dates in the same columns but the skill sets vary as to each project, some projects may have two of the same skill set in column A because there is two people needed who can do the same thing, I need to total up the days over the sheets for each week and skill set.
I have been using the SUMIF formula as follows:
=SUMIF('Sheet2'!A8:A10,'Summary'!A4,'Sheet2'!F8:F10)+SUMIF('Sheet3'!A8:A15,'Summary'!A4,'Sheet3'!F8:F15)
And so on for each sheet and then change the formula for the next skill set and then again for the next column.
Is there a way of doing this without having to enter a formula into each cell, at the moment I am coping and pasting the formula into word to do a find and replace to change the SummaryA4 to SummaryA5 etc and then into the next cell for the corresponding date.
So to make this seem like it makes any sense I am looking for say an 'Administrator' in all the project sheets over all the dates and for it to add it up for the summary sheet. Under the corresponding week against the skill set.
So it would be F4:F20 for w/c 06/05/13, G4:G20 for w/c 13/05/13 and so on until all skill sets.
View 5 Replies
View Related
Nov 17, 2005
I need a formula that sums the values with 2 different criteria and 2 different look up ranges
View 9 Replies
View Related
Jan 10, 2008
I am using a work sheet where I want to count if Column A has one criteria and column B has another
example
column B states is used to track contracts it can be vendor
column L tracks status it can be open, received, or closed
I want to count the cell if the vendor name matches and the status is open
also if that is possible is the same possible with 3 ranges and criterias?
View 9 Replies
View Related
Nov 15, 2006
What I'm looking for is that it ADDS the values, when 2 or more ranges and criteria are met. I don't think it's possible through the SUMIF because it allows "range,criteria,sum_range." But I know there's another way around, if so, please demostrate in a basic formula.
Like.. I have something on A:A (name) and B:B (points), and the formula must meet the 2 ranges & criterias (name & points) to add the values in C:C (money).
View 9 Replies
View Related
Dec 29, 2007
i want to do is i have an excel spreadsheet...and i have two columns in there that are called Representative and one thats called Result....The Result column has Closed, Rescheduled, and Not Interested....so what i want to do, im looking for a formula that will calculate how many CLOSED are from a certain Representative....so if i have 5 Closes for John...im looking for a formula to calculate those 5 for John...but i dont know what formula nor how to use two diff. ranges with two diff. criterias....
View 7 Replies
View Related
Mar 11, 2008
I have a spreadsheet where my dropdown menu is taken from a master list. The master list is also broken down into several catagory specific lists.
I need a macro that will take the individual cells in the worksheet that use the master drop down list, check them against the contents of the specific lists (defined names) and assign a cell color fill based on wich list the data was found in.
lets say my master list is:
MASTERLIST
apple
orange
bananna
lemon
pork chop
sirloin
chicken wings
carrot
potato
onion
sage
thyme.............
View 9 Replies
View Related
Dec 11, 2007
I have a sum part of which is $I$4:$I$500.
The 500 part of the sum is constantly being manually changed using edit replace because of a growing amount of data.
In cell A1 ona another worksheet within the workbook I use the Count function to count the number of rows containing data. This cell is named DataCols
Is it possible to combine $I$ with the named Range DataCols?
I have got this far - ="$I$"&INDIRECT("ColNo") which returns 500 if I remove "&I$"& in front of it.
View 6 Replies
View Related
Jan 18, 2008
I am trying to write an array using =sumproduct. I cannot get the second array to work. Whenever I split up the arrays they work fine separately, but not together. This is what I am putting. Any help is greatly appreciated. I am not sure if I am even using the correct formula.
=SUMPRODUCT((B37:B51="Math")+(F37:F51)+(I37:I51="Math")+(M37:M51)),[(B18:B31="Math")+(F18:F31)+(I18:I31="Math")+(M18:M31)]
So basically, I am creating a transcipt. So in column B if the subject is Math, I want column F to be added and so on and soforth. See there are more arrays, because it is broken down to grades 9, 10th, 11th, 12th. And what is being added is their credit (.5 or 1) for the class for each year.
View 9 Replies
View Related
Jan 19, 2010
IM trying to add the result of multiple ranges sharing a single criteria and have had no luck. I am trying to get the range from every other colum and have the total qty of the selected criteria display in a single cell. The best way to describe is countif with multiple ranges and a single criteria. perhaps countif isnt the answer, it is the only way i know to describe the issue though.
View 3 Replies
View Related
Mar 26, 2013
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559
Pallets: 3
Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code
To Zip Code
Pallets
Weight From
Weight To
[Code]......
View 1 Replies
View Related
Jun 12, 2014
I have two lists of values in separate columns with condition in adjacent cells, all on the same sheet
List 1 consists of numbers from 1 to 12, column to the right is either blank or Free
List 2 consists of numbers from 13 to 24, column to the right is either blank of Free
List 1 starts in A2, B2 is either blank or Free
List 2 starts in D2, E2 is either blank or Free
In column G, from G2 i want it to list all values from List 1 and List 2 where their status is Free
View 14 Replies
View Related
Sep 26, 2011
I am trying to do index match function with criteria ranges in another worksheets. The code kept on giving me " #Value!"..
Here is the code:
Sub test1()
Dim myvalue As Variant
Dim wsname As String
Dim i As Integer
Dim j As Integer
Dim r1 As range
Dim r2 As range
Dim r3 As range
Dim r4 As range
wsname = "CustomerIDbyParts"
[Code] .......
The resulting cell of F5 kept on returning #Value!.. I suspect that my syntax for looking up the ranges from another worksheet is wrong?
View 3 Replies
View Related
Oct 23, 2009
My setup is - excel 2003 sp3 / windows xp
On one sheet (Data) I have a list of action items, each with owner; target date; classification and in some cases revised target date. I'm trying to report on these fields and provide a status, by owner and classification, of how many are overdue; due this month; due next month; due beyond 2mths.
Using a SUM array formula on another sheet I can count the number that are overdue based on date; owner; classification; and target date, but can't find a solution if there is a revised target date. Any guidance you can give would be greatly received.
=SUM((Data!$L$3:$L$27=D$18)*(Data!$P$3:$P$27=$C23)*(Data!$N$3:$N$27
View 9 Replies
View Related
