I'm getting an "Object Required" error on the following code. I can't figure out what the problem is. It copies the worksheet properly but fails to set the objWS object to the newly created sheet. I'm sure it's something simple. Set objWS = objWB.Worksheets("Product").Copy(after:=objWB.Worksheets("Product"))
View 4 Replies
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I am copying a WorkSheet and I want to set it directly to an Object. I don't want to use the activeWorksheet. I does work like this with .add so my idea was it should work with copy too.
[Code] .....
It does Copy the Worksheet, but afterwards VBA gets error 424
SO how do I set a Workbook.copy ?
I have a worksheet which is used to display analysis data to the user. The sheet will be further protected with only some cells available to the user. I've used the attached code to retrieve some data from the sheet, clear a bunch of cells to reset the sheet and reset a graph (the graph itself is plotted as a log-log with the 1 to 100 on the Y-axis, hence the resetting of data to 0.5 to push it below the axis and make it invisible ready for later data dumping).
The code worked fine until I protected the worksheet. I have set the charts to unlocked using the format option in the chart area prior to locking. When I run the code though, it stops on the line indicated with the error "Application-defined or object-defined error". I've double checked and Chart 7 is the correct chart, and it is unlocked according to its format properties.
VB:
'get date of survey and equipment number for retrieving the data from the archive
dateSurvey = Worksheets("Calculation Page").Range("B2").Value
equipNum = Worksheets("Calculation Page").Range("F2").Value
'stop screen updating
Application.ScreenUpdating = False
[Code]....
EDIT: Oops, I've just noticed that even if I unprotect the sheet, I get an error on the .select within the seriescollection stating "Method 'Select' of Object 'Series' Failed", and the code worked perfectly before. I'm completely lost now...
For some reason I'm consistently getting an error in the following line:
Code:
Public wkbk1 As Workbook
Public shtInput As Worksheet
Public i As Integer, iPass as Integer
[Code]....
I have this password protected Excel template (v.2002), it includes one particular drop-down box, which is not a data validation choice selection, but a 'object' drop-down box which offers choices linked to a hidden value, via the INDEX function. The issue arises when I password protect the template and attempt to select from the available choices, I get a dialog box telling me the "the cell or chart...is password protected and...read-only"..."To modify...remove protection". I imagined checking the "Edit Objects" selection, upon protecting the worksheet would have avoided any problems, but that doesn't do the job.
Sub a()
z = 4
y = 7
sWork. Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0 lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
End Sub
but when I include it in my main code
sWork.[A1:L9] = 123456789
For z = 1 To 81
y = [A1].Offset(nRow(z), nCol(z))
If y > 0 Then
sWork.Cells(1 + nRow(z), 1).Replace y, 0, lookat:=xlPart,searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.Cells(1 + nCol(z), 2).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.Cells(1 + nBox(z), 3).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.[A1].Offset(nRow(z), nCol(z) + 3).Value = 0
sWork.Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
sWork.Range(Cells(1, 4 + nCol(z)), Cells(9, 4 + nCol(z))).Replace y, 0, lookat:=xlPart, searchorder:=xlByColumns, MatchCase:=False
sWork.Range(Cells(1 + Int(nRow(z) / 3) * 3, 4 + Int(nCol(z) / 3) * 3), Cells(3 + Int(nRow(z) / 3) * 3, 6 + Int(nCol(z) / 3) * 3)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
End If
Next
I get a "Method 'Range' of object '_Worksheet' failed" error at line 9,
when z = 4, y = 7, and nRow(z) is a UDF which = 0.
I'm trying to accomplish the following: on "LogSheet" sheet, click on the DailyCloseButton and have various lists on the "lists" sheet automatically sorted before I save and end. The code below gives an error: "Method ' Range' of object '_Worksheet' failed". I have no idea why it failed.
Private Sub DailyCloseButton_Click()
' DailyClose and sort routine
'Sort lists
Sheets("Lists").Activate
Range("Products").Select
Range("Products").Sort Key1:=Range("Products").Cells(2, 1), _
Order1:=xlAscending, Header:=xlYes, OrderCustom:=1, MatchCase:=False, _
Orientation:=xlTopToBottom, DataOption1:=xlSortNormal.............
I am having a problem with this bit of code. When I try to run it it shows Method Range of object Worksheet Failed.
The original code I adapted this from works just fine, and the only thing I have changed is the ranges and the sheet.
The code is:
Sub Filter()
With Sheet18
'
.Range("DisbData").AdvancedFilter Action:=xlFilterInPlace, _
CriteriaRange:=.Range("Criteria"), Unique:=False
.Range("DisbData").SpecialCells(xlCellTypeVisible).Copy Destination:="DisbPaste"
.ShowAllData
End With
End Sub
The line that the debugger is showing has issues is:
.Range("DisbData").AdvancedFilter Action:=xlFilterInPlace, _
CriteriaRange:=.Range("Criteria"), Unique:=False
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I have a simple macro that cycles through the sheets in a workbook, and if the sheet's codename matches one of a defined list, some of its data is added to a summary sheet.
The macro works exactly as intended, but a strange thing happened yesterday: some data was missing from the summary sheet because one of the sheets was being ignored. This sheet is named 'MCP' on its tab, and has codename Sheet8.
Here's the strange part: on stepping through the code, cycling the sheets, I noticed that the sheet icon, name and codename had disappeared from the Microsoft Excel Objects folder in the Project Explorer. When the loop got to the sheet in question
Code:
For Each ws In ThisWorkbook.Worksheets
Debug.Print ws.Name
Debug.Print ws.Codename
The above code displayed its name (correctly) as 'MCP', but its codename was blank; the sheet was therefore skipped by the code because the codename had to match against a defined list.
While I was pondering this, and doing some web searches, the sheet then re-appeared in the Project Explorer and everything worked again.
My question is this: is it likely to be due to the workbook being shared? I know that workbook sharing in Excel is often discouraged, but this is a simple workbook only used by a maximum of three users (two of these had the workbook open at the time the issue was reported)
I've changed the code so that the sheet name is inspected in the event that the codename is blank, which should guard against the issue provided sheets are not deleted/renamed.
Windows XP, Excel 2003
ws5 and ws7 are defined and working due to other parts of the code already using them. ive copied the syntax from some of my other copy destination codes the only difference here is instead of ("A2:J10") ive got "(Cells(2,1):Cells(iRow, 10)" as the row number for this is variable, and it is calculating the correct value for iRow and iRow2. its probably something stupid im missing but i cant figure it.
View 7 Replies View RelatedI'm trying to copy all the sheets into a new workbook but the following code does not copy the workbook object called "ThisWorkbook", it does copy ALL the other sheets however.....
ActiveWorkbook.Sheets.Copy after:=Workbooks(fileDst).Sheets(1)
The "ThisWorkbook" object appears at the end of the list names "Microsoft Excel Object" after all the sheets are listed in the VBA project explorer, like this.....
Microsoft Excel Object
<icon> Sheet2(Sheet2)
<icon> Sheet2(Sheet2)
<icon> Sheet2(Sheet2)
<Excel icon> ThisWorkbook
I have code in there that is needed such as Workbook_Open() so it's needed when I copy to a new file or I have to hand copy it everytime.
I M Getting Run Time Error 1004 Method Range Of Object _ Worksheet Failed
Option Explicit
Private Sub cboPart_AfterUpdate()
'On Error Resume Next
[Code]...
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
From the current open book, I'm opening a 2nd book, then copying all worksheets from the 2nd book that meet criteria, into 1st book, (in the same order), but am getting Method 'Copy' of object '_Worksheet' failed error. What am I doing wrong?
How to OVERWRITE worksheets?We'll be running the same process with new data, so also need to overwrite worksheets in 1st book.
Sub Build_Branch_File()
Dim FileName As String
Dim Wkb As Workbook
Dim Ws As Worksheet
Dim WNum As String
Dim Tnum As String
Dim RegionNo As Integer
Dim Original_Wb As Workbook
With Application
. ScreenUpdating = False
.EnableEvents = False
.DisplayAlerts = False
End With
Set Original_Wb = ThisWorkbook .........................
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate()
If Range("B1").Value = Range("N1").Value Then End
Sheets("Data3").Select
Cells(13, 6).Copy
Sheets("Data Lookup").Select
Cells(23, 11).Paste
End Sub
I'm getting the following error:
"Object library invalid or contains references to object definitions that could not be found"
I wasn't getting that error last night and I'm not sure what I may have done to cause this error.
It seems to be cause by code running on one sheet of my workbook, but I'm not really sure about that. I'm still a bit of a novice at VBA.
I'm using Excel 2002 SP3 and I'm running MS XP Home as my OS.
Do you have any ideas what can cause this error and/or how to trace down the offending objects/code?
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
'Code1
Call movedata(1, rrow, ecol, erow)
'Contact Person
Call movedata(26, rrow, ecol, erow)
Worksheets("new").Activate
Worksheets("new"). Range(Cells(erow, ecol), Cells(erow, (ecol - 2))).Font.Bold = True
'Name
Call movedata(2, rrow, ecol, erow)
'Street Address
Call movedata(3, rrow, ecol, erow)
'city
Call movedata(4, rrow, ecol, erow)
' zip
Call movedata(5, rrow, ecol, erow)
Worksheets("new").Range(Cells(erow, ecol)).Font.Bold = True
' speed dial
Call movedata(6, rrow, ecol, erow)
the first time font.bold is set to true, it completes w/o error. The bolded line returns 'application defined or object defined error 1004'. Ive tried activating the new sheet immediately before setting bold (like the first time it gets set) but it still errors.
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedI would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies View RelatedI have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies View RelatedI have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
View 5 Replies View RelatedI have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
