Sumproduct With Blank Cells
Dec 23, 2008I am using SUMPRODUCT to count using two conditions. ie count if column D = 5 AND column E = 1, I am using the formula below which works perfectly.
View 3 Replies
ADVERTISEMENT
Sumproduct Using Blank Cells
Dec 18, 2008Sumproduct using blank cells. I have a grade file with this formula in B12.
View 4 Replies View RelatedSUMPRODUCT Not Working When Cells Blank?
Dec 30, 2013=SUM((DATA!$F$2:$F$3000=A3)*(DATA!$N$2:$N$3000="N")*DATA!$J$2:$J$3000)
This formula doesnt work but =SUM((DATA!$F$2:$F$25=A3)* DATA!$N$2:$N$25="N")*DATA!$J$2:$J$25) works. Thats because all the other cells higher than 25 have a reference to another cell. How to solve it? Maybe with SUMPRODUCT / ISBLANK? See attached file.
Excel 2010 :: SUMPRODUCT Answer To Return Blank When No Data In Specific Cells
May 12, 2013I am using Excel 2010 and I am trying to average the amount of days in a month to a daily average per person in my worksheet.
Total sales per person
A5 = 10 - This is the Grand total per person for column A
A6 =4
A7=6
Daily average per person
C5=2.6 - Average for all persons here
C6=2.0
C7=3.0
The formula I am using is:
=(SUMPRODUCT($A$6:$A$15,C6:C15))/$A5
Which gives me an answer of 2.6 in cell C5 as shown above which is what I am wanting.
Please note that my cell range for my staff goes from 6-15 for both Column A and C where the other cells are blank in both columns.
My question is, If I was to clear all the data in both Columns A6:A15 and C:6:C15, cell C5 would return to a #VALUE. How to I change the formula so that if the cells were Blank, cell C5 would also be blank until I enter data for each person again?
Sumproduct With Blank Criteria
Oct 30, 2007I have the following sumproduct formula which looks in one column to search for a series of dates (greater than one date and less than another date). It then looks in column O to see if there are certain criteria if the date criteria is met. The problem is I have a lot of blank cells in column O which need to be captured.
I have this:
=SUMPRODUCT(--('Raw Data'!$B$2:$B$50000>=$H$2+0)*('Raw Data'!$B$2:$B$50000
Sumproduct And Dividing With Blank Rows
Apr 9, 2009I am trying to divide a range that has blanks in. The range is the result of a webquery and taking the blanks out would be time consuming at best.
Conveniently (potentially) the blank row is every other row in the range.
SUMPRODUCT - How To Ignore Blank Criteria
Feb 15, 2012I have set up a formula to count the occurrences of multiple conditions in a table of data (see below..) the formula reads from 4 cells of criteria but I will not always use the 4 criteria and maybe only need to use say 2 criteria - when I do this my formula doesn't work - my example below shows this... How do I make the formula continue to work when some criteria cells don't have any entries?
This table is a simple example but my main work will have a much larger table (poss. several thousand rows) and probably about 10 criteria cells, so running a big formula with 10 nested IF statements will be too cumbersome... any smart workround for this within the SUMPRODUCT formula?
The top left cell (Fruit) is A1..
FruitColoursTownsNamesApplesRedLondonHarryApplesGreenParisBertPearsBlueLondonFred
PlumsRedVeniceSteveApplesRedLondonBertCriteriaResultFruitPears0ColoursTownsLondonNamesFred
FruitColoursTownsNamesApplesRedLondonHarryApplesGreenParisBertPearsBlueLondonFred
PlumsRedVeniceSteveApplesRedLondonBertCriteriaResultFruitPears0ColoursTownsLondonNamesFred
The formula currently in my Result cell is
=SUMPRODUCT((A2:A6=B10)*(B2:B6=B11)*(C2:C6=B12)*(D2:D6=B13))
which returns 0 and should be 1 in this example...
SUMPRODUCT Formula To Equal Blank Value
Nov 14, 2006I have a code which will delete all rows where the value in column C is blank. However my formula is column C is the following:
=SUMPRODUCT(--(ENERGY!$B$5:$B$147=B15),--(ENERGY!$E$5:$E$147=A15),ENERGY!$C$5:$C$147)
Is there a way to change this formula so that if a value is not returned, I get a blank cell?
Sumproduct Returns A Zero In False Condition, Instead Of A Blank
Jan 8, 2007I've written a sumproduct formula, which does what I want it to do; but it returns a zero in false condition, instead of a blank. I've tried several things, but don't seem to be progressing very far. Here's the formula that I ended up with.
View 9 Replies View RelatedSUMPRODUCT & Dynamic Range: Total All The Blank InDates For Each Technician By Employee Number
Feb 22, 2009I have what I thought was going to be a simple function to create and, after a week of getting more error messages than I've had in a year, I'm ready to throw in the towel. Situation: There are two worksheets in the same workbook [Excel 2003]. One is for "Posting" details about technicians and their work orders. The other is a "Report" that summarizes the number of workorders open, closed, etc.
In the "Posting" sheet, I have created dynamic name ranges for two columns: Technician (4-digit text field) and InDate (date field that, if blank, means that the technician has not closed this work order. My ranges are set up like this:
Technician=OFFSET(Posting!$B$2,0,0,COUNT(Posting!$B:$B),1)
InDate=OFFSET(Posting!$D$2,0,0,COUNT(Posting!$D:$D),1)
So all I need to do is to total all the blank InDates for each Technician by employee number. I've tried COUNT to SUMPRODUCT. A co-worker got it to work with using...=SUMPRODUCT((ISBLANK(Posting!$D$2:$D$65307))*(Posting!$B$2:$B$65307=4288))
His solution was to list almost every available cell in each column. I just can't help but think that the dynamic name range should be able to work but I can't get it right. I think I'll choke if I get one more "N/A" or "VALUE! error.
Ignore Blank Cells And Truly Blank Cells In Named Range?
Jan 13, 2014Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
Leaving Blank Cells Blank In Dragging Formula Combining Different Formulas In One Cell?
Aug 2, 2014I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedFill In Blank Cells Referencing Non-Blank Cells Above
Apr 17, 2008I have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedCount Blank Cells Within A Range Not Including Fully Blank Rows
Jul 15, 2008I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
IF Statement To Leave Cell Blank If Multiple Cells Are All Blank?
Mar 12, 2014I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedHow To Populate Blank Cells With Sequence Until Non Blank Cell Is Encountered
Mar 22, 2014I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Imported Data Creates Blank Cells That Aren't Really Blank
Feb 21, 2006Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
List - Filling In Each Blank Cells With Value Contained In First Non-blank Cell Above It
Feb 27, 2013I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
Replace #VALUE! Error For Blank Cells With Blank Cell
Nov 17, 2008The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
Why After Paste Value The Blank Cells Are Like Not Blank Anymore
Aug 13, 2013 the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
Copying Down Blank Cells Until Blank Row Is Reached?
May 24, 2014I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
Count Blank & Zero Cells Where Corresponding Column Not Blank
Jun 15, 2007I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View RelatedNot All Cells Found With SUMPRODUCT
Apr 5, 2009I have no clue whats going on with this data. Most of the values transfer from the 'Log' to the "Table' with no problem but for some reason, that escapes me at this time, all do not.
View 3 Replies View RelatedArrays In Cells And Sumproduct
Jun 1, 2008I place the below formulas in A1,A2,A3 …A100
A1 = --(D10:D20="A")
A2 = --(E10:E20="F")
……….
These formulas return arrays {1,0,01….) and of course they can not be displayed in single cells (error message).
Is there a way I can use them in a sumproduct formula?
C1 = SUMPRODUCT(A1*A2*A3…*A100)
The reason is that in reality they are much more complicated and I get error messages (length of the sumproduct formula) and secondly this way I can “understand” and use better my formula.
I dont think that i can "break" the sumproduct in smaller pieces and would be great if i can do something like the above.
If / Then Functions Looking For Blank / Not Blank Cells
Dec 14, 2012I'm am trying to combine columns B and C in such a way that the result will appear as B: C when C is populated and B alone when C is not populated. I've tried a variety of functions, and I'm unable to get the result I want. This is my most recent attempt:
=IF(C2=ISBLANK, B2, B2&": "&C2)
Look For Various Strings Within Range Of Cells Plus SUMPRODUCT
Jan 9, 2013I have a series of incident reports (some of which are injuries), and I'm calculating the number of incidents per body part per month using:
=SUMPRODUCT((ISNUMBER(FIND($D4,owssvr!$Q$2:$Q$2188)))*(MONTH(owssvr!$A$2:$A$2188)
=MONTH(math!F$2))*(YEAR(owssvr!$A$2:$A$ 2188)=YEAR(math!F$2)))
In which D4 is the body part (Neck, for example), owssvr is the sheet with the records being summarized and F2 contains the month being queried.
The problem I'm having is that I want to calculate data for a region of the body (head & neck), which will include count any record that has a part of that body region (nose, face, eye, tooth) mentioned in the affected area text. If I simply sum all the values calculated for each body part, records that include multiple parts (e.g. "scratched nose and eye") will be counted twice.
Can I calculate whether a range of cells for the incidents contains any of a specified range of body parts (listed in D4:D15), but do this for each month, and count each record only once (e.g. "cut nose" = 1 record, "cut nose & eye" = 1 record).
Sumproduct Trying To Match Cells With Slightly Different Names
Jun 10, 2013See attached spreadsheet. I have 2 tabs. The current portfolio tab is feeding in from the computation tab. My formula in column C works for 2 securities, MSFT, and AApl as the name is identical in both tabs. I am running into an issue where the names are not identical.
Example: I want to sum both the INTC, and the INTC pref in the computation tab and have that fill in the current portfolio tab. Also, in the computation tab ticker 005930 ks should fill in the current portolio tab for samsung electronics. My lasst issue is in the computation tab where I want to pull in sony, and sony adr (multiplied by 1,500). total sum 1,5723,995,015 in the current portfolio for sony.
excel question.xlsx
Sumproduct Formula - Ignore Empty Cells
Sep 26, 2013I have a table that looks similar to the below. I want to be able to extract the numbers between the brackets and add all up in the last column (as shown in example below).
I have used something like the below however it returns #VALUE in column F because of the empty cells.
(SUMPRODUCT(REPLACE(A1:F5,1,FIND("(",A1:F5),"(")+0))
I need a formula that will be applicable even when there are empty cells and return the results as shown.
A
B
C
D
E
F
Worker (3)
Engineer (23)
Manager (1)
27
Plumber (2)
Designer (20)
22
Summing Multiple Cells Populated By Sumproduct Formula
Nov 9, 2012I have this formula populating a huge table of data for number of inspections performed, the first reference is a name of an individual, the second reference is a name of the company, and the third reference is the week ending date.
=SUMPRODUCT(((Sheet1!$C$3:$C$1000=$A2)*(Sheet1!$D$3:$D$1000=D$1)*(Sheet1!$B$3:$B$1000=$A$1)))
there are 5 of these sheets for 5 different categories. I can get these spreadsheets to populate but i then need to be able to sum from each spreadsheet all of the times an individual inspected a certain company, so one cell in each of the 5 tables.
Each time I do this it returns a 0. If i sum from one table it will return a number but if I sum from multiple tables I get 0
=SUMPRODUCT(((Sheet1!$C$3:$C$1000=$A2)*(Sheet1!$D$3:$D$1000=D$1)*(Sheet1!$B$3:$B$1000=$A$1)))
If Two Cells Are Blank Return Blank - If One Has Date Subtract Today Date
Apr 24, 2013Using one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4