I have created a chart with dynamic ranges. Ranges are defined for that particular worksheet. However when I want to paste that chart on another sheet, chart formulas are not updated for the new sheet. I have similar ranges in each worksheet. I want be able to paste the chart on any of the sheet and change chart ranges/formulas with minimum work.
Is there any way to do that automatically?
I have attached an excel file attached. I have 175 different part numbers, but I made an example of 10 numbers to show my problem. On sheet “Supplist” I have a list of part numbers that I need data on from sheet “Subtotal”. Basically I need the numbers from the “subtotal” list to marry up with the part numbers on the “supplist” Right now I am just manually entering the data, I know excel is smarter than me.
View 13 Replies View Relatedi have 2 userforms and i want be able to put the data that appears in one textbox, and make it appear in the textbox in the other userform.
View 2 Replies View RelatedI have a problem with my current macro that uses a basic autofilter to auto filter from the parent database to extract the correct rows and then copies the query and pastes it into a new worksheet to further proceed with the macro.
I have run into a problem because my database has become very big and now when I try to autofilter the query and click on copy, an error regarding the data range reference is too complex - use data that can be selected in one contiguous rectangle
I tried a few things such as to autofilter out everything I dont need and hit delete - this does not work either, same result
I got help here previously in which the code deletes All Hidden Rows and this is very time consuming, I have not tested all my methods but it took 15 minutes to delete hidden files for one method and theres roughly 5 in total
I have to end up running this code on the parent worksheet multiple times because I use the parent worksheet to extract different parameters into different worksheets!
I have noticed that if I manually copy the data in smaller blocks, by halving the data seems to work,but I do not know how large of a partition I am limited to copy because my database is very large and the size varies month-to-month so I cannot put a number on the max range. I think if I could get a macro to do it by thirds or preferably quarter range should be safe.
So just to summarize, I am trying to devise a method in which I would auto filter on the active parent sheet "sheet 1" and I would copy the auto-filtered query to "sheet2" instead of copying the whole worksheet in one instance I would like to split the autofitlered query into four equal parts with respect to the range of the worksheet and then to copy the first quarter of the query and paste in sheet 2 and then the second quarter to sheet 2 and so on untill all four quarters are done one after the other, so sheet 2 should be a series of all four parts combined into one series on sheet2
I went to add the count to the inventory, it keeps returning an error where the date is pasted from one sheet to the other. I had originally tried to reference the value of the date directly, but because it was being passed to a merged cell, Excel didn't like it too much, so I had it copy and paste it. That worked at first, now it suddenly doesn't.
View 2 Replies View RelatedI know this has been discussed a number of times, but here is my problem
I have three charts in my workbook. I want to attach a macro so that when the chart is clicked it returns to Sheet - Home. I have using the following:
worksheets("Home").activate. But after I protect each chart and the workbook, and save and exit. When I reload the Workbook it has forgotten the assigned macros and nothing happens.
Need a way to update a single master file. What happens right now is that the cost manager sends out one file to a lot of different project heads and then on having them return back to him he basically has to individually add in all the data. What i am trying to do is that he somehow carries on sending out the data as there are a lottt of projects and then on returning them they automatically update.
I have this list of companies (about 50) in one work sheet. If a certain company has sales or costs it will appear under the company name, as either Products, Installation or Freight. It looks something like this:
Company
Sales
Costs
[Code]....
What formula should I use the find the installation that belongs to that certain company? And not all companies has a line that say installation.
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
I am trying to select cells, tables and charts by just knowing their name. Thus if possible I would like to only refer to a chart by its name i.e. not know what worksheet they are on. This seems to work for named ranges of cells/tables, but not charts (I can't get my named charts to appear in the "Define Name" dialog).
I found this code that loops through charts on the activesheet and shows the names. However, I would much prefer not to have to specify the sheet or to loop through all the sheets trying to locate the one with the named chart.
Public Sub GetEmbeddedCharts()
Dim myChart As ChartObject
Dim myCharts As ChartObjects
Set myCharts = ActiveSheet.ChartObjects
For Each myChart In myCharts
Debug.Print myChart.Chart.Name
Next
End Sub
I have a sheet ( Graphs A) with 50+ graphs on all linked to a datasheet (Data A).
I now want to copy these graphs to another sheet (Graphs B) which links to a different data sheet (Data B). The data is in the same layout format etc.
The problem is that the find-replace function will not replace the sheet name in the charts series formula from Data A to Data B
Is there an easy way to change the source sheet for the new graphs?
I have designed a software in excel/vba and when I run that project then startup form appears which has various buttons on it and they perform different functions.
My problem is when I click on button "View MI Report" at first out of various buttons then it works fine and displays me the excel chart sheet. But If click on any other button first and then on view MI report button then startup form disappears and a file is created at the desktop and then after few seconds startup form again appears but it doesn't display the excel chart sheet. I have written the following code on the button
Private Sub CommandButton5_Click()
For Each wssheet In Worksheets
If Not wssheet.Name = "chart1" Then
wssheet.Visible = xlSheetVeryHidden
End If
Next wssheet
UserForm4.Hide
Sheets("chart1").Select
end sub
I received a workbook, and one of the sheets has a chart based on data from another sheet within the same workbook. Interesting enough that I cannot select any cell within that chart worksheet, all the rows and columns headings are gone, i can only select the chart. Secondly, it doesn't look like anything is locked. I can still protect the worksheet for some reason, so it's not protected.
View 3 Replies View RelatedI am copying the entire contents of a worksheet onto a blank worksheet multiple times. The problem occurs with the charts which need updating once copied to reference the new worksheet name. I have tried stepping through each chart and then each SeriesCollection but it seems to fall over part way through.
View 2 Replies View RelatedI have a spreadsheet that has multiple sheets and each sheet has a graph, at oresent if i have to add a new sheet and graph i copy the last sheet, rename the tab then off we go, but i alway have to remember to also change the sheets graph title. is a mechanism so that if I change the Sheet Tab name then the chart will use the sheet tab as a chart title.
View 2 Replies View RelatedFor example, a cell on the screen is blank. When the page is printed, the "blank cell" has printed text.
I checked "format cells" and it shows word wrap, merge cells, and left to right.
I was told to "un-merge" the cells. I did that and I still have the problem.
The color on all the cells is OK at a blue shade. When I look at print preview the cells are blank, but when the sheet is printed, the text shows.
Also, it looks like there are 2-3 cells inside the main cell.
I hope I have explained this properly, it is not easy to use the correct language to describe since I am not very good at using Excel.
this is a competition scoring sheet
i want to add this automatically
when i enter chest number then the name of winner and team name want to come automatically and the pointing also (see sample)
point first 5 point second 3 third 1
how to do this
i'm trying to delete a specific type of chart from the active sheet using this macro:
View 2 Replies View RelatedI have a data set where the rows contain monthly sales data (from January to December) and the columns contain the names of employees (joe, bob, sue, etc.) and a single "group average" column:
I would like to create a chart for each employee showing the employee's monthly sales vs. group average. For example, the first chart would be for joe...
Then the next chart will be for bob and so forth...
I have a sheet that gets updated from external source. For e.g. the B2 cell of sheet updates the date and C2 cell updates the value as on that date from the external link. Since, the value of the cells gets updated every time I open the sheet, I want to copy the value of cells to another sheet in chronological order ,when the file gets opened in different dates, so that I can present data in dynamic pie chart.
View 1 Replies View RelatedHow do I paste the first chart into the second chart but maintain the format of the second chart?
View 2 Replies View RelatedI'm using Excel 2010 and I've got a chart on a worksheet and the worksheet needs to be protected. I'm able to manipulate the chart in any fashion EXCEPT the position of the Data Labels. Is this a bug in Excel 2010?
View 3 Replies View RelatedSheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.
View 3 Replies View RelatedI have a user that uses pivot tables and charts every month to do a report. He wants to copy his charts every month and then just change the month in the data for the pivot table, but not matter what he tries its tied to the previous month and then chart data range in the select data source properties is grayed out. how to get this to work?
View 3 Replies View RelatedI have been trying to create a macro in excel to chart a selection of data and to output the chart on the active sheet where the data was taken (as opposed to a named sheet). So basically, I have about 300 worksheets with data, and I would like to have a button on each page that automatically charts that data when clicked, and outputs the chart to the page where the macro was clicked. However, I have not been able to figure out a relative reference that will allow me to make the LocationasObject reference simply the ActiveSheet as opposed to a specifically named sheet. See my code below, which references an output to a worksheet called "Charts". Right now, all of my charts are outputting to the sheet called "Charts", as opposed to the active sheet.
Sub ConsDiscChart()
ActiveCell.Offset(29, 11).Range("A1").Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlDown).Select
ActiveCell.Offset(0, 1).Range("A1:B1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Offset(0, -1).Range("A1:C24").Select
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.Location Where:=xlLocationAsObject, Name:="Charts"
With ActiveChart
.HasTitle = False
.Axes(xlCategory, xlPrimary).HasTitle = False
.Axes(xlValue, xlPrimary).HasTitle = False
End With
End Sub
I need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View Related