I have attached an excel file attached. I have 175 different part numbers, but I made an example of 10 numbers to show my problem. On sheet “Supplist” I have a list of part numbers that I need data on from sheet “Subtotal”. Basically I need the numbers from the “subtotal” list to marry up with the part numbers on the “supplist” Right now I am just manually entering the data, I know excel is smarter than me.
View 13 RepliesI have created a chart with dynamic ranges. Ranges are defined for that particular worksheet. However when I want to paste that chart on another sheet, chart formulas are not updated for the new sheet. I have similar ranges in each worksheet. I want be able to paste the chart on any of the sheet and change chart ranges/formulas with minimum work.
Is there any way to do that automatically?
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
=IF(ROWS($1:1)>MAX(C:C),"",INDEX(A:A,MATCH(ROWS($1:1),C:C,0)))
I can't get it to work correctly across two sheets.
I've attached Sample of spreadsheet for review : HDForm_Test01.xlsx
i have 2 userforms and i want be able to put the data that appears in one textbox, and make it appear in the textbox in the other userform.
View 2 Replies View RelatedExample, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
I have a problem with my current macro that uses a basic autofilter to auto filter from the parent database to extract the correct rows and then copies the query and pastes it into a new worksheet to further proceed with the macro.
I have run into a problem because my database has become very big and now when I try to autofilter the query and click on copy, an error regarding the data range reference is too complex - use data that can be selected in one contiguous rectangle
I tried a few things such as to autofilter out everything I dont need and hit delete - this does not work either, same result
I got help here previously in which the code deletes All Hidden Rows and this is very time consuming, I have not tested all my methods but it took 15 minutes to delete hidden files for one method and theres roughly 5 in total
I have to end up running this code on the parent worksheet multiple times because I use the parent worksheet to extract different parameters into different worksheets!
I have noticed that if I manually copy the data in smaller blocks, by halving the data seems to work,but I do not know how large of a partition I am limited to copy because my database is very large and the size varies month-to-month so I cannot put a number on the max range. I think if I could get a macro to do it by thirds or preferably quarter range should be safe.
So just to summarize, I am trying to devise a method in which I would auto filter on the active parent sheet "sheet 1" and I would copy the auto-filtered query to "sheet2" instead of copying the whole worksheet in one instance I would like to split the autofitlered query into four equal parts with respect to the range of the worksheet and then to copy the first quarter of the query and paste in sheet 2 and then the second quarter to sheet 2 and so on untill all four quarters are done one after the other, so sheet 2 should be a series of all four parts combined into one series on sheet2
I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
View 9 Replies View RelatedI am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedSheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A
Mr. Jones 3B 3B 3B
Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri
1A
1B
2A
2B
3A
3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available")
It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies View RelatedI remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies View RelatedIn the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
I've got a bit of a quandary here that my novice programming skills can't seem to solve.
Here is the scenario. I work for a photographic library. We have a spreadsheet that contains 5 or so columns, and a couple of thousand rows. Essentially each row contains an imagine code (the number we use to file away the imagine, ie. US_NY_NYC_1 ) in the first cell, and the image information in the following cells (ie metadata, keywords, photographer, date, etc).
so a typical row would look as follows:
Filename | Keywords | Photographer | Metadata | Location |
all the keyword, photographer, metadata, and location information can only be tied to the one image code whose cell begins the row.
Now, here is my dilemma. This sheet (lets call it the master sheet) contains all the images we have in a given batch. However, when a client orders images, we will send them most images in that batch, but not all, and we may send a few additional. So I have a separate sheet that contains only those image codes that the client requested. What I need to do is essentially take a code from the second sheet, find that same code in the master sheet, and copy over all the cells associated with that code's row. If the number does not exist in the master sheet, simply leave that row with only the code in the first cell, and the rest blank, and move on.
so for example, in my second sheet lets say I have the following A_B_C . I would like for excel to find that same code in the master sheet, and then copy over the metadata, photographer, date, etc, associated with that code, and paste it into the second sheet, so that that row in the second sheet now looks identical to the row with the same image code in the master sheet . If A_B_C does not exist in the master spreadsheet, then I would like excel to simply leave that code in its own row, leave the rest of the row blank, and move on to the next code.
i need a macro that will compare the p'folios in sheet "Data to Sheet Workings, and then list the p;folios which is in sheet Data but not in workings in Sheet "New", so in the example below this would be ETSTSA ...
View 9 Replies View Relatedi'm trying to get data added in one sheet of a workbook to automatically be entered into another sheet. such as a monthly, Quarterly and Annual balance sheet.
View 3 Replies View RelatedI have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedI have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
Create a macro button in 'Spreadsheet 2' that searches 'Spreadsheet 1' for updated information specific to a certain criteria and adds it to a new row in 'Spreadsheet 2.'
There are three sheets
Prospects (where all original data is entered)
Actions -Bob (Bob's new Prospects are added to this sheet)
Actions -Frank (Frank's new Prospects are added to this sheet)
So in this example Row 6 in Prospects (Constituents, Rating, Manager and Solicitor would be added to ACTION - Bob's sheet on Row 5
and
Row 8 in Prospects (Constituents, its Rating, Manager and Solicitor would be added to ACTIONS - Frank sheet on Row 5
Here is the example spreadsheet - Prospects and Actions.xlsx
I have an excel workbook with two sheets. Sheet 1 has a list of people names, rank, address, and phone numbers. Sheet 2 has boxes where a user can select a last name from all last names in sheet1. What I want to happen after the user selects the last name in sheet 2 is for it to automatically fill in the rest of the data (ie Rank, First Name, Address, city, Home phone number, Cell Phone number). What do I need to do in order for this to work?. Attached is a very small example of my much larger project.
View 3 Replies View RelatedCurrently, Im running a button macro. When this button is clicked, the table from "315 Employee Data" will copy the names from column C to "315" sheet B12 onwards.
Now, what i want is when I update the employee data on "315 employee data" sheet, I want "315" sheet to automatically match the names from "315 employee data", delete and add names when I add or remove employees from the column the next time i click on that button again.
After the above is achieved, when i add new employees,run the macro and it displays the updated list of names, I want "315" sheet column A to do automatic numbering.
I have attached the file for your reference.samplesample.xlsm
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
I have a macro that selects and copies and pastes a range of data from one sheet to another sheet. It works perfectly except it is pasting all the cell formatting and formulas and i only want or need the values.
View 8 Replies View RelatedI need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.