Userform Count Used Range With Cbobox
Jun 22, 2008
My userform has a combobox that shows a list of player names in column A from cell 2 down to row 15 on Sheet1.
On Sheet2 the names are from B1 to O1.
Some present code runs and takes data on sheet1 and sends it to sheet2.
On Sheet 2, under each players name is an amount that person has acquired.
Is there something that can be added to the user form to count just the number of times a player has an entry greater than Zero and from the combobox selection show me in another combobox or listbox what this amount is during userform runtime?
View 9 Replies
ADVERTISEMENT
Aug 16, 2014
I'm currently working on the database for use at work and i would like to improve the code below with couple more functions in my userform.
This code is triggered after i put any value in the textbox then it looks for part number in the "Update" tab and counts how many times this part number appears in column ("Q2:Q") and then depending on count result it shows nothing or "No Sample" in the "Skip" label.
I would like to add some improvements to this code and here comes complicated part:
After i will input any value into the textbox the code should:
1. go to "Database" tab and sum all majors and minors for this part number; Part numbers are listed in the "Database" tab column "F2:F", Majors in column "P2:P", Minors in column "O2:O". Majors and minors are numbers.
2. if this part number has no majors or minors (basically if all cells in column P and O are blank for this part number) proceed with the code below otherwise substract (-) the sum of majors and minors from the count result in the "Update" tab.
For example part number "PN1234567" has been booked 10 times(counts in the Update tab column Q) and we summed 3 majors and no minors for this part number (summing in Database tab columns P and O) it should look like this : 10-3=7, basically we need to do this simple calculation. Of course if we will find more majors and minors then the bookings it should look like that: for example 15bookings-10majors-10minors = -5
3. and finally knowing the final result we can select the case as in the code below.
[Code] ......
Attached File : 16_08_2014 - Copy.zip
View 8 Replies
View Related
May 22, 2007
I have a form using text boxes to enter some data into a spreadsheet. These text boxes appear in pairs for any single point (e.g., name ; location). Does anyone have a code which can actually define how many of these pairs will appear on the form when loaded? For example if there are 5 points to be defined the form should have 5 pairs of these text boxes. The maximum number of these pairs is around 10 and I could make a form with a 'standard' number of 'pairs' but that's not really it. I've tried to attach the form but it did not work
View 9 Replies
View Related
Apr 28, 2014
I can’t seem to add the “Insert New row” or where to add or maybe I’m not even doing it right. I have a worksheet with 4 column and need to only function in these columns as I have information doing something else.
In Column A, B, C and D are my main column for the following functions:
Column A will act as titles
Column B will act as sub titles (There can be multiple sub titles withing the same title, needs to be added on an as when requirement)
Column C will act as possition (There can be multiple position withing the same sub Title, needs to be added on an as when requirement)
Column D will act as sub position (There can be multiple sub position withing the same Position, needs to be added on an as when requirement)
All columns will react to what is in Column A. I have the following code for column A:
[Code] .....
This will look in my next available row to see if it is a blank row then add my information from my userform listbox.
I have tried to add the same procedure to my column B but don’t even come close to what I need in this function.
I need that when I double click my sheets cell in accordance to the following code:
[Code] ....
...to show my userform then to add the information but only to look in Column A to D and not pass this column.
I have added a Workbook to add the other information has it could get long to actually explain but to quickly explain:
I will need to add a title (already set up with a userform, listbox and on click of this listbox it will transfer the information to my sheet) This will look in my Column A to see where is my next available blank row and add the listbox value to it. If I double click column B, next to the columns A title, I need to add this information on the next available blank row but to create a Insert new row as there could be addition information going in column A or B and so on... I presume it will be the same code for C and D as this has to function the same way.
See Attachment for details and information : Book1.xlsm
View 2 Replies
View Related
Jan 29, 2013
I would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
View 1 Replies
View Related
Aug 7, 2014
Trying to count how many days from a set range of dates are within another range.
So for example, the first two dates, 7/29/2014 - 8/5/2014 would be 6
7/31/20148/6/2014 are the set dates
Count Days Within Range.xlsx
View 4 Replies
View Related
Nov 24, 2009
I have two ranges that show parts of a question to be answered and those parts already answered (aa6:aa55 and ab6:ab55). I would like to count those elements where the value in column AA is greater than the corresponding value in column AB, showing questions with parts still to be answered. Currently I have a formula comparing the two and am counting the occurrences of true or false. This seems to be overkill and I am sure that there is an array formula that can do the same thing more efficiently, unfortunately I cannot figure it out.
View 5 Replies
View Related
Jul 31, 2014
My question is - for a Ref range in the user form, I want to set it up to only be able select from column A B and C. ( it has select ABC column at the same time, if missing any column, error message will come out, or select out of this range, the error message should also come up. )
I know how to set the range to all three columns, but I know don't how to ask for " must select from all three column?"
View 2 Replies
View Related
Jun 3, 2014
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
View 6 Replies
View Related
Dec 8, 2008
I have a range of cells (say A2:a9) that contain only numbers but some of those numbers could be 0 No empty cells no cells with text.
How can I count the number of cells with 0's?
View 2 Replies
View Related
Feb 27, 2013
I have a refedit box in a userform wherin i will be selecting a range and thus getting a value say "$A$1:$A$2"
Now what i need is that it should seperate the value as follows so that they can be used in another place
starting column to a variable x.
starting row to a variable y
similarly
ending column to a variable p
ending row to variable q
Looking for code that if i select more than 1 column in the refedit it should tell me to select a single column and not more.
View 2 Replies
View Related
Apr 1, 2014
I have created the attached spread sheet to work out and calculate gp on products. Sheets and userform1 are working perfectly how ever userform2 wont load and I believe its something to do with the named range? The idea for this userform was to select a product from combobox1 and then change the price on sheet1 and clear the price on sheet 2 in the different sizes.
Also userform2 i would like to create it so that if any of the fields are left blank it wont change price of selected field in sheet 1 and wont clear selected area in sheet 2.
Finally is there a way on userform1 to shrink the userform size depending on how many sizes are needed?
Attached File : NEW GP CALCULATOR.xlsm
View 4 Replies
View Related
Feb 28, 2014
I have userform which shows days in month & populated Listbox for cell values. I want checkboxes to be ticked and Textbox to count when conditions are met, for each day. Range is, example (for 1st day) from E3:E318. My code so far is :
[Code] .....
So, When "MIN1" reaches value of 2, checkbox is ticked - If more than 2 then Msgbox ; When "MIN5", I want to be counted in Texbox ;
View 4 Replies
View Related
Oct 20, 2011
I have dynamic named range that lists by columns. I can use this with data validation pull down on my worksheet and all is fine. But when I use this named range in the RowSource of a combo box in a userform, I only get the first column of data, or basically, the data in B1, but not C1, D1, ect. Here is the formula for the named range.
=OFFSET(INFO!$B$1,0,0,1,COUNTA(INFO!$1:$1)-1)
View 2 Replies
View Related
Jan 31, 2013
I have a userform that uses a text box to get the number of cards printed, as each card prints the card number increases from 1-the number inputed.
I need to make it so i can use the text box to enter a range of numbers, eg. 20-40 printing 20 cards with the numbers starting at 20 and increasing by one on each card. At the moment i use a for loop to start at 1 and step up 1 until the number of cards entered prints, I'm not sure how to get the bounds from the text box to be able to print how i want.
My code is at the moment this,
For intindex = 1 To UserForm.textbox.Value Step 1
For x = 1 To UserForm.Gradelist.ListCount
Worksheets("placards").Range("TonN" & x).Value = intindex
Worksheets("placards").Range("A_B" & x).Value = ""
Application.Refresh = True
Next x
Worksheets("placards").PrintOut From:=page, to:=page, Copies:=1
Next intindex
View 2 Replies
View Related
Aug 10, 2009
Sheets("Sheet1").Shapes("ComboBox1").Select
Selection.ListFillRange = "='Sheet1'!$b$15:" & comborange & ""
where comborange = cell reference of the last cell in my range..
I have moved this combo box to a userform now and I'm trying to populate the box via one of the userforms triggers.. My problem is I can't figure out the syntax to select the combobox on the userform.. it doesn't seem to be handled the same way as when it was on the worksheet..
View 9 Replies
View Related
Nov 8, 2009
i want to insert a range of cells from a worksheet onto a userform. how can this be accomplished? i use excel 2007, so theres no spreadsheet control. active x controls i dont know anything about and i heart its unsafe.
View 9 Replies
View Related
Jul 26, 2006
I have a worksheet called "ComplaintData".
In this worksheet I have data in following range : "N1:V2".
N1 to V1 is headings and N2 to V2 is data transfered from listbox on userform.
I am trying to print this range via command button on my userform.
I am wondering anyone can help me with the code for selecting and printing this range when user clicks on the "Print" command button on my userform?
how I can format this print out to look different than the tabular format? I mean if possible I would like to print this in portrait, fit to one page and possibly not look like a table. (If it has to look like a table then I will have to go with landscape as the table wont fit portrait without getting too small and un-readable)
View 6 Replies
View Related
Jan 17, 2007
I have a speradsheet for my work, which gives the user problems and solutions to our website. however I cant get the userform to recognise the named ranges I have added. (ie the first combobox wont recognise the rowsource, which is a named range).
View 9 Replies
View Related
May 30, 2008
I have a user form that with a textbox on that I want to use a search tool, then display the outcome on the user form. the worksheet has 3 columns in titled Name, Description,Contact number. What i want the form to do is when I place the comapny name in the text box on the form and press enter it will look though my table on the worksheet and display the Description and contact number on the form. I am not sure if I will need to place a frame or text box onto the form for this as of yet all i have is the textbox.
View 5 Replies
View Related
Aug 8, 2008
I want a control to select a range in a userform I'm creating.
I wonder if we can use the same type of control the wizards use, where you click on the right and choose the range? Alternatively, what's the best option?
View 9 Replies
View Related
Jul 20, 2009
I have a sheet that has various data in the range of cells from B1 to Q80.
In these cells are various letters, numbers, etc. In some cells, the letter "L" appears not at all, sometimes once, sometimes multiple times.
I need a formula (or another method), that counts the number of times "L" appears in the range of B1 to Q80 (and not outside this range). Unfortunately, COUNTIF wont do the trick since sometimes in a single cell, "L" appears multiple times and would get counted only once.
I prefer a formula, because I have to do the same thing for the letters D, H, O, M, C, U, K.... I figure I could just copy/paste and modify slightly for each letter I'm trying to count the instances of. Unless of course there's an easier method.
View 10 Replies
View Related
Sep 24, 2009
I have a problem if column A has 10 dates (some the same) i need to count the seperate dates ie if A1;A10 has 4 dates of 24-09-09 i need to total that many dates which is 4 to go into a cell named Thursday 23-09-09 will add up and go in wed and so on sorry no example no winzip in work.
View 3 Replies
View Related
Feb 11, 2010
I have a 2007 spreadsheet where a person's age is entered into a cell. I need to count how many are between 26-30, 31-35, 36-40, etc.
View 2 Replies
View Related
Dec 28, 2012
how I would get Excel to count within time ranges?
For example:
car1 arrival/departure: 9:02 / 9:06
car2 arrival/departure: 9:02 / 9:04
car3 arrival/departure: 9:02 / 9:12
I want to be able to see how many cars are present during 5-minute intervals, so my results should be:
9:00-9:05 : 3
9:05-9:10 : 2
9:10-9:15 : 1
For small data sets I would do this manually.
I saw another thread using VBA, but I don't know how to edit that
View 5 Replies
View Related
Nov 29, 2002
I'm trying to count, in a range of cells, how many fall between certain values, such as between 75,000 and 99,000. The array formulas seems the way to go, but it looks like it only accepts one condition not a range.
View 9 Replies
View Related
Apr 29, 2014
I am trying to write a formula that will count how many cells in a particular range have one of several options in them of differing data types.
The four acceptable values are: 1, Completed, Not Requested or an empty cell
The formula I have so far is below, but is returning a "#VALUE!" error.
Code:
=SUM(IF(E2:E33="1",1,(IF(E2:E33="Completed",1,(IF(E2:E33="Not Requested",1,(IF(E2:E33="0",1,0))))))))
View 4 Replies
View Related
Mar 16, 2007
Count & Sum is one of the most usefull function in the Excel,
I always used this, Is it possible in VBA to create such code that if I Select a range and click on Commandbutton1 automatically one msgbox display with the Count & Sum of the Range Item
eg. If Range A2 to A5 has a number like 50,10,20,10
here if the command button is click automatically one msgbox is display
which showing the
-Total Sum of the Seletced Range is 100 and Total Count is 4
View 9 Replies
View Related
Apr 11, 2007
I want to compare the total % change I have to several markets. I have to do this for several months.
Problem is that the total % change can be + or - and the market change can also be + or -
Examples of what I'm looking for:
total % change is -20%, market change is -10% result it 10
total % change is -20%, market change is +10% result it 30
total % change is +20%, market change is -10% result it 10
total % change is +20%, market change is -10% result it 30
I tried to figure it out but I'm drawing a blank.
View 9 Replies
View Related
Jan 26, 2009
I have use for this function on varying ranges. I pasted my function as well as my call to it. PhasesActive is just a named range of 5 cells. I get an error... by ref argument type error. Something with the argument, do I have to name the worksheet the range is on?
Function RangeValueCount(Rng As range)
'The function to check if a range has more than one value marked for 'selection, ex: The phases choices
For Each cell In Rng
If Not IsEmpty(cell) Then
RangeValueCount = RangeValueCount + 1
End If
Next cell
End Function
Call RangeValueCount(PhasesActive)
If RangeValueCount > 1 Then
msg = "There appears to be multiple phases selected. Please select only" & vbNewLine
msg = msg & "one phase at a time"
MsgBox msg
End If
View 9 Replies
View Related
