How To Total Amount By Name
Oct 17, 2011
I want to sum income of my team by name without sort.
Example: I have as beloow in excel:
$ 10.91 Khear
$ 10.91 Khear
$ 10.91 Vichda $ 22.73 Linda $ 31.82 Linda $ 13.64 Vichda $ 10.91 Khear
$ 10.91 Khear
$ 10.91 Linda
$ 13.64 Virak $ 10.91 Khear
So I want to calculate name Linda, how much? Khear How much? without sort or separate for calculate.
View 4 Replies
ADVERTISEMENT
Mar 15, 2007
In a financial environment we have a calculator which uses iteration to allow for a cost being added to loan amount where the cost is based on the total loan amount. Iteration is set to 100 iterations with max change .001
On one PC the first time the calculator is opened it gives a particular (incorrect) result. If the input cells are cleared and the data re-entered, it gives the correct result. This only happens on one particular PC. Is there some other setting , other than the iteration setting, that would cause this?
View 5 Replies
View Related
Aug 14, 2008
I am trying to write a calc for a total an amount based on a list choice
Here is the Set up
Fields A1 thru A255 are number 1 to 255
Fields B1 thru B255 are number 255 to 1
Field C1 is a List box set using A1 to A255 and its list
Field D1 is set as the needed Calculation
When you choose a number in C1 the D1 calculation should total the amount of Fields B* to B1, * being the corrisponding B field to the A field from the list
Example C1=100 (Field A100) D1=Sum of Fields B100 to B1
View 9 Replies
View Related
Mar 7, 2008
I have pivot tables where I need to look through a series of names and sum the hours and dollars charged by that person. When I try to do a pivot I can get it to read
column 1 Column 2
John Doe $4000
Mary Smith $ 500
But if I try to add the hour columns it breaks it out by the week the hours was charged
column 1 Column 2 Column 3
John Doe $2000 4
2000 4
Mary Smith $ 250 5
250 5
I want it to just give me one dollar total and one hour total per employee.
View 2 Replies
View Related
Apr 21, 2009
to run a macro that enters a new row after each set of currencies (which have been sorted). I now need to enter a total balance cell within this empty row which calculates the total amount for each currency.
I need to do this using the SUMIF function below:
SUMIF($J$3:$J$300,"L/C",$I$3:$I$300)-SUMIF($J$3:$J$300,"L/D",$I$3:$I$300)
the above basically lets me calculate the total but as no - and + signs were input it does this by recognising the 'dr' and 'cr' in the column next to the amount.
View 9 Replies
View Related
Sep 25, 2009
I have 2 tables, one with invoices, the other with purchase orders. I would like to have a "PO Amount Remaining" column on the invoice table that looks up the PO listed on the invoice with the PO $ amount on the PO table. Once it is matched, I would like to subtract the total invoices to give me the amount of the PO that is left. Basically I would like the "PO Amount Remaining" column right now to have $4,200 listed in each row for invoices 1 & 2.....
View 18 Replies
View Related
Apr 25, 2008
Is there a function, or how would I write a vba to figure out the following.
I have 86 items all with a different price, which come to a total of $348,359.33, is there a way to figure out which combination of the 86 entries will give me a total of $57,673.36
View 8 Replies
View Related
Mar 5, 2014
I have a report that I want the total amount (in the bottom right corner, but can vary in row number) to appear in a particular cell in the header. In the macro, I selected the cell & entered "=CTRL+End". It works in reality, but not in a macro. It returns a visual of 0.00, but "=XFB1048565" in the formular bar. How can I get the header cell to return the correct total amount?
View 3 Replies
View Related
Oct 5, 2009
I need a formula that calculates the total rent amount for particular dates. Example would be a formula that includes a date starting at the first of the month (October 1, 2009 to September 30, 2010) and also would include a date starting at a date later than the first (October 3, 2009 to September 30, 2010). The figures needed would be the monthly rent (ex: $1,000) and a pro rated rent amout for a lease that starts after the first of the month. The pro rated amount would also have to include the years with a leap year. I have been working on this but I know there has to be an easier way.
View 9 Replies
View Related
May 29, 2009
I need to prorate a total dollar amount by a selected number of attendees. How can I do that with code, I know the formula for excel, but how do I put that on my user form so it only does the math as a new entry is submitted? I do not want to have the formula on the spreadsheet which is my report unless there is an entry on the row, which will only be the case when a user completes the user form. I just do not want the div/# error on the sheet visible if at all possible.
View 2 Replies
View Related
Mar 26, 2014
I am trying to calculate the total amount of kilos for a specific date with a given time range.
As well as the average time they have been handled with in the same specifications.
Attached is a sample sheet of the info I am working with but I cant seem to get the formulas to work.
Book1.xlsx
View 9 Replies
View Related
Dec 18, 2009
I have included my budget so helpers can see it. I am trying creating a formula on mini-dashboard on A8 (Under the total budgeted amount) that will check the total budgeted amount based on the values I enter on the categories sheet. Of course it will be controlled using the drop down menu on A2 on mini-dashboard. I thought I had this working with a sumif function but it seems to have quit working.
View 2 Replies
View Related
Jan 28, 2009
I need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.
Example:
Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%
month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00
and so on...until the end of year.
I tried using an if formula by could not get it to work.
View 9 Replies
View Related
Jun 5, 2008
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View 4 Replies
View Related
Nov 20, 2012
For the below macro.
ABCDG
CodeTotalBaseNetA1 = 20%
A110083.3316.67A2 = 10%
A2350318.1831.82A3 = 7%
A3220205.6114.39A0 = 20%
A015015030
A1 is the code, take the total(B) and calculate the base(C) on the percentage given in the G, net = B-C. for A2 and A3 it is the same process.
For A0 the total (B) is equal to Base(C) and calculate the net on the given percentage in G.
View 1 Replies
View Related
Apr 28, 2012
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
View 6 Replies
View Related
Jan 7, 2010
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
View 2 Replies
View Related
Apr 22, 2009
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
View 9 Replies
View Related
Mar 5, 2014
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies
View Related
Dec 21, 2008
I'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies
View Related
Dec 13, 2013
number for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies
View Related
Jun 13, 2014
I am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it.
been trying to figure out a macro so when you press the update button it then just updates the monthly total.
Colac Production.xls
View 7 Replies
View Related
Feb 22, 2008
I need some code to do the following.
Look at worksheet 1. Find column "Amount". Insert column next to amount.
For all highlighted cells in column "amount" insert text "R" in adjacent (inserted) column.
View 9 Replies
View Related
Oct 10, 2009
In an excel work shift schedule, I am trying to total the total number of days someone is scheduled for different shifts. I can get a total for the current schedule but I want to be able to have a year to date total as each new schedule is added in. These totals are in the AF through BC columns in the xray shift totals in the attached worksheet.
I don't know if it is possible or not and am working on a pre-existing worksheet.
View 9 Replies
View Related
Sep 13, 2009
Sub sumbotton()
Dim ar As Range
Dim rng As Range
Set rng = Selection.CurrentRegion
Set rng = rng.Resize(rng.Rows.Count + 1)
rng.Rows(rng.Rows.Count).Select
For Each ar In rng.Areas
ar.Resize(1).Offset(ar.Rows.Count) = "=SUM(" & ar.Address & ")"
Next ar
End Sub
View 9 Replies
View Related
Oct 15, 2007
I have a sheet in my workbook with at least 180 small tables, there may be more.
I woulds like to be able to change total formulas for all tables at once to show either year-to- date or total year.
For example:
If we have only progressed through the second period of the year, I would like to choose something to indicate period 2. At other time I may want to know the total year whether the periods are completed or not.
View 9 Replies
View Related
Jun 9, 2014
I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
View 9 Replies
View Related
Feb 20, 2009
How can i sum up the amount of all "case" sold in the second month of 2009.. so the output should appear in C11 as i have already done manually.
View 9 Replies
View Related
Apr 1, 2009
Trying to add a formula in my spreadsheet that will add every amount in column AQ8:AQ200 if the date in AQ8:AQ200 is march.
The format for the date is 3-12-09.
Here is what I'm trying.
=SUMIF(AU8:AU200,MONTH=3,AQ8:AQ200)
View 6 Replies
View Related
Sep 27, 2005
I have a total amount of $52,000 and I want to show an equal amount in twelve
columns which represent 12 months from sept 2005-sept 2006. My calendar goes
for 3 years, jan 2005- jan 2008. How do I get this amount to show up in the
correct columns.
View 9 Replies
View Related
