Copying Data From Multiple Sheets?
Dec 1, 2012
Im looking for a way to copy all rows with data in them from row 3 to the last row with data to another worksheet. I would like to copy the data from ALL worksheets in the workbook apart from one called Grade Boundaries.
All the sheets have the same layout. I simply want to produce a sheet with the data from all sheets in one place.
View 1 Replies
ADVERTISEMENT
Jun 4, 2009
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
View 9 Replies
View Related
Feb 6, 2012
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
View 9 Replies
View Related
Feb 5, 2013
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
View 4 Replies
View Related
Mar 6, 2007
Ive put some sheet code together that i need copied to 12 sheets (jan to December) in 24 workbooks (each workbook has trhe same sheet names). I dont want to alter the actual content of the Excel sheets, I just need to copy VB code from a template (in VB editor) to the 12 sheets in each of the workbooks. Is this possible to do with VB or do i need some other utility since Im using the VB editor....
View 9 Replies
View Related
Nov 24, 2008
Basically, what I am trying to do is my workbook has 12 sheets, 1 for each month. In cell A7 on the first sheet (Jan) I would like to enter 01-01-2009 and then it add a month on each of the sheets. e.g. 01-02-2009 01-03-2009 and so forth. I know I can manually put in the first of the month on each of the sheets, just wondering if it can be automated.
View 3 Replies
View Related
Jan 8, 2007
I have a large workbook which has about 15 sheets. About half of these are template sheets which are copied multiple times within this workbook. The workbook is very large and can't be posted. I would like to hear from anyone who can give me any direction to look in given the following symptoms. The problem is that VBA code stops executing and gives a 1004 Error. *The problem is stable and reproduceable.
*It occurs exactly the same across three different computers with varying versions of Excel and memory.
*The problem is persistant beyond VBA. By that I mean if I stop the debugger and try to manually copy the active sheet, the screen flashes but the sheet is not copied. Therefore I think the 1004 error is a symptom rather than a cause
*From scratch, I get to copy 43 times before I get the error.
*If I then save the workbook and re-open (don't need to close Excel) I then get to copy another 27 sheets.................................
View 2 Replies
View Related
Apr 9, 2014
I'm working in one workbook with 2 sheets.
sheet 1 have simple values, for example
cell A1:5
Cell A3: 10
Cell A5:15
Cell A7:20
Cell A9:25
Cell A11:30
Cell A13:35
Cell A15:40
In sheet 2 i have the following formulas:
Sheet 2 Cell A1: =Sheet1!A1+Sheet1!A3
Sheet 2 Cell A2: =Sheet1!A5+Sheet1!A7
I need to respect this sequence when copying these 2 formulas in the same sheet 2 cell A3, however when I do that I get the following formula: =Sheet1!A3+Sheet1!A5. While i need it to sum up A9 and A11. i.e respect the order of the first 2 formulas.
View 3 Replies
View Related
Aug 5, 2006
There is a Microsoft VBA bug currently outstanding where if your VBA replicates a sheet too many times, it throws a run-time error. I read MS' statement that, to get around this problem, what one can do is to save and close the file, and re-open the file once in a while.
Doing this certainly helped, where it used to crash after copying only a few times and now it goes on until 40 ~ 50 times. But it still crashes. Has anybody been able to get around this problem? Currently I am having VBA save, close and re-open the file every 7 or 8 times or so...
View 5 Replies
View Related
Apr 17, 2008
How do I write a vb macro that copies everything from multiple files, including sheets within files, and puts them into one master file. Here's what I have so far. I used a script from gnaga that worked great but it didn't copy seperate sheets. If you can help me out, I would greatly appreciate it.
Sub MergeSheets()
Dim SrcBook As Workbook
Dim fso As Object, f As Object, ff As Object, f1 As Object
Application.ScreenUpdating = False
Set fso = CreateObject("Scripting.FileSystemObject")
Set f = fso.Getfolder("C:Temp")
Set ff = f.Files
For Each f1 In ff..........
Set
View 9 Replies
View Related
Feb 28, 2014
i am trying to copy a data from another sheet, and i know to use "=sheetN!XM" but i have already renamed my other sheets, so i cant copy data from renamed cell using this command also by changing the command as the new sheet name...
View 3 Replies
View Related
Oct 14, 2008
i have 2 columns of data in multiple worksheets which i wish to copy into one column on another sheet.
i want to be able to click a button and have all the data compile with the item number and serial number into sheet "compile" no matter how many sheets i have (my current macro copys the sheets with a sheet prefix onto it, ive left 31 and 32 there) automatically. Ive edited compile with one sheet of data (note i just copied 31 to 32 - normally all data would be different, not a straight copy) to show what i am trying to achieve. the 17000 will stay the same no matter what, so i just used an IF function there. Basically the part im having issues understanding is how to copy data to the next blank space in the work book, as it wont always be full of data.
At the end of getting this part working i will set it up to automatically compile into a seperate work book as a csv comma delimited to upload to a database for stocktaking purposes - but i just want to get the basic copying working first.
View 9 Replies
View Related
Feb 20, 2009
I have two spreadsheets in the same workbook. Sheet1 contains statistics for teams and years. Sheet2 contains a listing of the teams in different orders.
How can I have excel copy a teams stats from Sheet1 to Sheet2 as it goes down the row? For example, A1 is atlanta 1996 so it copies a section of atlanta's 1996 stats to a specific range. Then A2 is detroit 2002 so it copies detroit's 2002 stats, and so on and so forth all the way down the list?
I am a beginner with VBA but I have experience with C/C++. I am just not sure of the functions for excel do all these things automatically and am having trouble finding applicable examples.
View 5 Replies
View Related
Apr 20, 2007
Given:
1.Four similar data worksheets (W1, W2, W3, W4).
2.Each worksheet has the same headings in row 1.
3.The data for each worksheet begins in column 2.
4.Each worksheet has an arbitrary different number of rows.
Problem:
What code allows you to automatically place the contents of all four data worksheets (W1, W2, W3, W4) into a different worksheet (w5) with only one common heading?
View 9 Replies
View Related
Sep 19, 2006
I have a mastersheet with all the information and I want to be able to copy it to new sheets.
The four different sheets I want are: Male-Olympic, Male-Sprint, Women-Olympic, Women-Sprint. Is there anyway to go through the sheet, copy the rows, and paste them into their proper sheet.
View 9 Replies
View Related
Mar 25, 2014
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
View 8 Replies
View Related
Jul 16, 2009
If the name in Column F of "Sheet1" is found in "DataPEs" in Column B, then copy the block of 6 cells of data below it in column Q to column D of "Sheet1" in their relative rows. Additionally, if column Q has data then copy it, if not then copy the data only in column M. Finally, the number of matching names will vary in Sheet1 but will stay mostly the same in the DataPEs sheet. I've highlighted one block of data in green as an example.
View 13 Replies
View Related
Jun 23, 2014
Example.xlsx
I am wanting to have a sheet that I use for reporting based on another sheet in the workbook but I want to exclude items that are closed.
The first sheet will contain all rows of data with a status column of either Open, On Hold or Closed
In the second sheet I only want to have listed the items which are Open or On Hold, I want to ignore the closed items.
In the example enclosed, I only want rows 2,4,6 and 7, but NOT 3 and 5 due to status.
View 2 Replies
View Related
Feb 24, 2014
I have a workbook with two sheets the first one is called "SDL" contain master data for three TEAMS (TEAM.A, TEAM.B & TEAM.C") and the second worksheet is called "SDL_Calendar" for graphical chart view.
I need Macro to copy the relevant column data from "SDL" sheet and paste into appropriate column in "SDL_Calendar" sheet then make separate sheets for each "TEAM".
I have attached the work book of what I am trying to accomplish.
View 6 Replies
View Related
Oct 21, 2009
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab.
1,7 or 8 would go to the lockbox tab.
2 or 5 = IN-HOUSE
3 = WIRES
4 = DATA OCEAN
Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
View 5 Replies
View Related
Feb 11, 2010
I've been trying to use the below code,
Sub combine()
'This will copy data from all sheets of the selected workbooks
'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String
mainsheetname = ActiveWorkbook.Name
MsgBox ("Please select spreadsheets to combine")
filestoopen = Application.GetOpenFilename(MultiSelect:=True)...
View 9 Replies
View Related
Aug 11, 2009
I've been given the task of automating a spreadsheet to assess whether work has been done by each employee. Every employee has their own spreadsheet, where column A is a job code, and column H contains either y or n dentoting whether they have completed the task (y) or not (n).
The main spreadsheet is designed to show any outstadning tasks across everybody so it has a list of everybodies names in column A and then any incomplete tasks will be listed from columns b onwards next to the appropriate person. Here is what I have done at the moment.
View 3 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Mar 12, 2014
I have attached a workbook (excel 2003), I have few userforms in it.
I tried to copy data from all the tabs in the workbook to "Master" tab but getting an error.
You have to login to file details are as below:
View 3 Replies
View Related
Jun 14, 2007
I've got a variable row length list of data, 24 columns wide with column headers in row 7 and file descriptions on the above rows, that I need to split up into seperate Workbooks dependant upon values in the last column, all rows with the same value in column X form the same new Workbook, which I can then SaveAs with a name associated with the value. I've seen a similar thing done to sheets on the forums by using the Advance Filter and I would adapt that to copy each created worksheet to a new workbook, but a) this seems inefficient and b) my unique values are too long to name sheets from.
View 6 Replies
View Related
Feb 22, 2013
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
View 4 Replies
View Related
Jun 22, 2009
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
View 3 Replies
View Related
Apr 12, 2006
I have about a thousand Excel timesheets that all contain 'hours worked' data in a column. Each row contains the area of the project they have worked on and therefore the amount of time they have spent on it. The timesheets also contain the person's name and a w/e date.
I want to sequentially work through each timesheet held locally in a single folder and copy the person's name, w/e date and the hours held in the column into a single new spreadsheet. I need to transpose the data so each amount of time spent on an activity ends up in a column.
I have attempted to record a macro for this but each time I try and run it after the intitial run, it moves to a completely different cell or set of cells to the ones I have directed it and consequently there is no data copied to the new sheet.
I believe this is the first problem..! The second is working through a high number of spreadsheets held in a single locattion but whilst browsing this site I saw the "Excel VBA Loop Through a Folder of Excel Workbooks" page and think this should work fine.
View 9 Replies
View Related
Jun 24, 2014
I've attached a sample sheet to this message.
What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.
For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.
Sample Data.xlsx‎
View 4 Replies
View Related
May 25, 2014
i wanna copy C and D columns in Sheet1 and insert these 2 columns (copy + insert copy cells function, not copy + paste) to all other sheets except Infopage sheet
View 14 Replies
View Related