How To Have Single Userform Put Data Into Two Separate Sheets Within Same Workbook
Feb 25, 2014
Is it possible to have a single userform put data into two separate sheets within the same workbook.
I have a userform set up for entering client data into a quote register,with no problems ( sheet 1)
A1, A2, A3, A4, A5, A6, A7, A8, A9
What I would like is for the data to also go to sheet 2, where I have a form set up to print off for our technicians to take on site.
The problem will be that I would like the data A1, A2, A3, A4, A5, A6, A7, A8, A9 not to store on this sheet after it is printed, so the next set on entries , can be printed etc.etc
View 2 Replies
ADVERTISEMENT
Jul 16, 2012
I have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL
ATL
ATL
ATL
CEN
CEN
JCK
JCK
etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
View 5 Replies
View Related
Jul 25, 2014
So I have a workbook (Workbook1) that opens a userform on launch. I have another workbook (Workbook2) that has a button to open Workbook1. Upon opening Workbook1 (and as a result the userform) I'd like to input data from Workbook2 into the fields of the userform. I'm not exactly sure how to reference the userform fields to input data from Workbook2.
I'm trying the following code:
Workbooks.Open (Workbook1)
With Workbooks(Workbook1).Userform1
UserformField1 = "Billy"
UserformField2 = "John"
End With
The macro is opening Workbook1 and the userform but the fields return blank.
View 1 Replies
View Related
May 22, 2008
I have a form which creates a budget based on user input. I want to save that user input in a separate workbook. My goal is to reduce the file size. I have several modules which perform evaluations/ calculations, and then format the output in a worksheet, but the size is pretty large 450KB.
I was thinking that I could set the control source, to different cells on the worksheet, and then just copy the worksheet to a new workbook, and save the data by itself. Then if I wanted to change the data for a given budget, I would copy the sheet back into the workbook that contains the modules, and load the form again. Is this a good solution? Is there a better way? Please let me know if I can provide more information.
View 9 Replies
View Related
Jul 30, 2013
I have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
[CODE]Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = TextBox1.Text
Cells(eRow, 2) = TextBox2.Text
Cells(eRow, 3) = TextBox6.Text
End Sub[CODE]
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
Would 'Training.xls' need to be open?
View 2 Replies
View Related
Dec 28, 2011
Call all data in new workbook or in single sheet from different sheets (except 1 or 2 sheet) of workbook. i already use some macro to hide some data from sheets so i want only filtered data.
View 8 Replies
View Related
Feb 1, 2009
I have 2 sheets which validates data using vlookup.
Sheet1
Table 1ABResult1121232313
=VLOOKUP(A7,B:B,1,FALSE) is the formula in result1 column.
Sheet 2
Table 2DEResult21020102040203010#N/A
=VLOOKUP(F7,G:G,1,FALSE) is the formula in result2 column.
The basic idea of these vlookup is to check whether the data present in A or D column is present in B or E. If the data is there then it will be retrieved in "Result1" or "Result2" columns. If not then the result would return the value "#N/A".
What im trying to do is to copy the resultant data(from Result1, Result2) other than "#N/A" from individual sheets to a final consolidated sheet.
View 9 Replies
View Related
Apr 23, 2014
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies
View Related
Apr 26, 2006
I have a workbook with 250 worksheets and I'm trying to build a single userform to work with all of them and I'm using binding to do that. Reason for using binding is that information is scatered all over the place, I mean a single column contains more then five different types of data with blank columns left in-between to be used as seprator, I know it's one of the worst ways to arrange data. Anyhow, the best part is that all the worksheets have the same type of information in their cells as of any other worksheet so binding does seems to be a good way to go ahead but only if it's dynamic enough to change accordingly with the worksheets.
Now I have already created a navigation-bar for it so I can use the same code for a drop-down menu list but what worries me the most is can I able to use a single form for all the worksheet and could it be done through binding?
View 5 Replies
View Related
Oct 15, 2012
formula to separate information in a single cell into multiple columns. I have hundreds of rows of data, so a formula to quickly separate the information into individual columns would be good. Below are a few lines of data.
ALMADEN STATION* 900 227 168 182 176
OAKRIDGE STATION* 900 276 332 362 349
OHLONE‐CHYNOWETH STATION* 900 469 480 522 504
ALUM ROCK STATION 901 947 925 1007 972
BAYPOINTE STATION 901 181 196 213 205
BONAVENTURA STATION 901 137 140 152 147
CAPITOL STATION 901 650 680 741 715
CONVENTION CENTER STATION 901 788 814 886 856
CURTNER STATION 901 569 571 621 600
ORCHARD STATION 901 87 94 91
View 6 Replies
View Related
Jan 5, 2014
I am trying to modify the macro that I have put together so that it executes only specific worksheets within a single workbook. In this example, I would like the macro to update worksheets A, B, and C but I have more sheets in my actual file. I am only able to get the macro to work on the active sheet. Attached is my workbook.
VB:
Sub HideColumns()
Application.ScreenUpdating = False
Dim myRange As Range
For Each myRange In Range("B5:M5")
[Code] .....
View 5 Replies
View Related
Feb 21, 2014
I am trying to combine sheets from various workbooks into a single file named "Combine". The goal is to have the sheets in Combine indicating their origin.
For example, with:
"File_1" having 2 sheets, "Sheet1" and "Sheet2"
"File_2" having 1 sheet, "Sheet1"
the goal is to have a file "Combine-forum" with the sheets named:
"Sheet1(File_1)", "Sheet2(File_1)", "Sheet1(File_2)"
I have grabbed pieces of code from various sources and read on the forums, but the result is different from what I want; I don't succeed to add the file name to the sheet name. Instead of the file name, the second part of the sheet name appears to be the order in which the workbook have been opened.
To be clearer, what I get is:
"Sheet1(1)", "Sheet2(1)", "Sheet1(2)"
Attachments: To_be_combined.zip 3 compressed files to be combined. I suggest to copy them in C:TEMP and to copy this path in the InputBox (see below). Combine-forum.xlsm Best working file that I have been able to create
View 2 Replies
View Related
Jun 30, 2006
I have 30 and above sheets in a work book and like that I am having 5 such
books. The sheets are named as 201, 202, 203 ....etc as per the contents in
that particular sheets. (201, 202 .....are the P.O nos.). all the work
sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say
324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms
part of the name of the sheet) that sheet should appear for me.
View 12 Replies
View Related
Apr 10, 2014
I am creating a Spreadsheet to work with a game which I am designing. I want to create a combat calculator which will generate formulas based on which class a person chooses to be, and their choice of weapons, armour and other equipment (makes things a lot easier for me to visualize). I have created the first worksheet which will act as the interface where users can input their character configurations and a second worksheet where all of the data is stored, included items and their values.
Assuming that on the interface I have cell A1 which will let the user select their class (Warrior, Archer, Sorcerer).
I also have cells B1 = Helmet, B2 = Body Armour, B3 = Leg Armour, B4 = Feet Armour, B5 = Hand Armour.
I would like cells B1:B5 to create a Data Validation based on the class which is selected in A1.
E.g.
IF A1="Warrior"; B1 = A list of Melee Helmets, B2 = A list of Melee Body Armour... etc
IF A1="Sorcerer"; B3 = A list of Magic Leg Armour...
I have managed to do this with the following formula, but only if the data is stored in the same sheet.
Cell B1
=IF(A1="Warrior", =meleeArmour1, =IF(A1="Archer", =rangeArmour1, =magicArmour1))
Cell B2
=IF(A1="Warrior", =meleeArmour2, =IF(A1="Archer", =rangeArmour2, =magicArmour2))
[NOTE]
=meleeArmour1 represents the range of cells where the Melee Helmets/Head Armour is stored.
=magicArmour2 represents the range of cells where the Magic Body Armour is stored.
The group cell names do not seem to work if they are on a different sheet, nor does it work if I replace the group cell name (=meleeArmour1) with the full formula (=Sheet2!A$1$:A$10$)
View 5 Replies
View Related
Aug 11, 2012
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
View 3 Replies
View Related
Jun 30, 2014
my macro comes up with an error on the Consolidate line that says 'Cannot add duplicate source reference'. I have a workbook with a variable number of tabs and I want to consolidate-sum (not copy and paste) the data from the various sheets onto a summary sheet within the same workbook. I'm at the point where it all works fine until it hits Consolidate.
Option Explicit
Sub ConsolidateExport()
'
' ConsolidateExport Macro
[Code]....
View 1 Replies
View Related
Feb 10, 2012
I have a raw data worksheet with 54000 lines, in the format of six columns
In Column A is the USER Name
What I would like with if possible is code that will move the six columns of data from each individual USER into separate sheets, using Column A as the basis of the new sheets, ie the last row for each user is when the user name changes to the next one.
View 2 Replies
View Related
Mar 6, 2014
I'm currently using the following code (that I found online) to take a list of data and copy it to specific sheets based on the values in Column C (there are only 4 columns in my data set). The issue I have with it is that it's meant to create the sheets from scratch every time. What I could like, however, is for it to copy the data to preexisting tabs that are already named with the sames values that are found in Column C. This macro will actually perform that but the down side is it wipes out everything that's on those sheets but I cant have it do that. Is there a way to either modify this sheet so it only copies the four columns and only pastes the four columns onto the sheets?
Sub SplitData()
Const NameCol = "C"
Const HeaderRow = 2
[Code]....
View 5 Replies
View Related
Jun 9, 2014
In the attached sheet, i have data in 2 sheets in the same fromat. Both the sheets are seperate reports.
Coloumn A is the list of Team Ids, Coloumn B is the Ids of people who are assigned in the team. Sheet 2 also have the same details with changes in the people ID.
i am trying to find if the people IDs in report 1 is the same in report 2. i need a formula that will check if the people ID is matching to the same team ID as in report 1.. If its not the same, the formula should be able to show that.
eg :
In report 1, "197595" in coloumn B is against "4011-11341" in Coloumn A.
I need to check if "197595" is against "4011-11341" or some other number in report 2. If "197595" is not against "4011-11341" in report 2, it should show me " Miss match". if "197595" is is against "4011-11341" in report 2 as well, it should show me "match"Project match.xlsx
View 3 Replies
View Related
Jul 16, 2009
If the name in Column F of "Sheet1" is found in "DataPEs" in Column B, then copy the block of 6 cells of data below it in column Q to column D of "Sheet1" in their relative rows. Additionally, if column Q has data then copy it, if not then copy the data only in column M. Finally, the number of matching names will vary in Sheet1 but will stay mostly the same in the DataPEs sheet. I've highlighted one block of data in green as an example.
View 13 Replies
View Related
Oct 4, 2013
How to pull data based on column B to individual tabs.
I have the following data:
A B C D
Jane Doe | L1 | 20% | High
John Doe | L2 | 15% | Medium
Mike Smith | L1 | 60% | Low
Marie Smith | L4 | 10% | Low
I want to have the first tab/spreadsheet only pull records that have L1 values for column B
In the next tab/spreadsheet I want to pull records that have L2 values in column B etc.
What formula can I write that will pull all L1 records (A.B.C.D) in to Tab 1, then all L2 records (A,B,C,D) into the next tab?
View 10 Replies
View Related
Feb 24, 2014
I have a workbook with two sheets the first one is called "SDL" contain master data for three TEAMS (TEAM.A, TEAM.B & TEAM.C") and the second worksheet is called "SDL_Calendar" for graphical chart view.
I need Macro to copy the relevant column data from "SDL" sheet and paste into appropriate column in "SDL_Calendar" sheet then make separate sheets for each "TEAM".
I have attached the work book of what I am trying to accomplish.
View 6 Replies
View Related
Mar 26, 2014
As part of report consolidation I need a Macro that can read through all the files in a particular location(Say a folder path) Pull the data for each unique products into separate sheet
In the example below : All the rows with "Chocolates to sheet 1" , Drink to Sheet 2 and so on Since the products in column 3 can vary the unique sheets need to be created at run time based on the source data
Workbook1
WEST
100
Chocolates
[Code]....
View 2 Replies
View Related
May 8, 2006
I am trying to use a macro to compare data from 2 sheets and spit out matching data in a third sheet. The first sheet has two columns of data. the second sheet has 4 columns of data. Only one column from sheet 1 and 1 column from sheet 2 will actually have matching data.
All other columns in sheet 1 and 2 are associated to the matching columns and must "tag along" into the 3rd sheet. I would love the third sheet to have a button that I just click and it populates the data.
The macro will be comparing between 50,000 and 500,000 items. Possibly a good book to use or even a referral for a proffesioanl or even some good heartedness,
View 5 Replies
View Related
Apr 1, 2014
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
View 1 Replies
View Related
Jul 6, 2012
I am trying to create a way to protect and unprotect all sheets and the worbook by means of a Userform pop up interface.
I have managed to create the Userform but what the code will look like and where to place the VBA code that will make it work, Also i would like to automatically save the sheet/s as i switch between them. so that any updates made to the sheet will be automatically saved when i move to the next sheet and also when i protect or close the workbook.
View 3 Replies
View Related
May 25, 2014
is it possible to place sheet names beside the data? What I mean is that, I'm currently working on a report which extracts data from the current workbook (many sheets) and paste it into a new workbook. As there would be duplicates due to many different sheets. I would like to have the duplicates removed but have the sheets name which they are found in the columns beside.
View 9 Replies
View Related
Sep 21, 2009
I'm loving these new formulas that i'm learning here and applying them to whatever sheets i come across to make my life easier at work...
So now i've created another worksheet, this one is to help my colleague who wastes atleast an hour everyday to generate a consolidated report of our bank accounts...
Now i've sorted out half of the report where he can give an overview of the position of cash flow on a daily basis.
Theres however 1 more addition i wanted to make to make this workbook absolutely perfect!
On sheet 2 (which is my consolidated report sheet) I want to add all the transactions that occur on a particular date from all the different bank accounts (Each account having a seperate worksheet)
I'm not sure if advanced filters can achieve this or not or even easier/short macros... Any tips/hints as to how i can achieve this would be awsome..
I've attached a sample workbook which has sheet1 for a bank account and sheet2 for report generation...
I want to add all the rows having "Clearing date" (column A) in Sheet1 to report date in Sheet2
..And this for all the account sheets i can add...
View 10 Replies
View Related
Jan 30, 2010
Im working with a huge amount of data in BOOK1.xls and once or twice a week I received an update of the list.
1. I need to compare and find out from the new updated worksheet if there is a new revision, and if there are new documents added to the list. I have tried Vlookup..but it didnt work for me. Ex. Doc1 has revision 1, 2 in my BOOK1 that I am working on. Note that there is a repetition of the DocName, Doc Number except for the revision.
View 3 Replies
View Related
Feb 5, 2008
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies
View Related
