I have multiple sheets in my workbook, I need t o be able to copy M10:M1016 from each sheet and then paste that information into a sheet called comparison.
Sheet1 would be pasted into D10:D1016 , Sheet2 would be pasted into E10:E1016 sheet3 into F:10:F1016 etc.
Instead of just counting all worksheets I want to count the number of worksheets between 2 control worksheets (Start and End). Reason for this is that I have a Workbook that grows weekly and each new worksheet is inserted after "Start". I have a macro that lists the Worksheet names but it grabs all and I only want those between Start and End.
View 9 Replies View RelatedI have been trying to figure this out for some time and cannot seem to
get it to work. I am using Excel 2003
I need to know the number of times a certain situation occurs across
12 worksheets.
Workbook has 12 sheets named Jan, Feb, Mar, etc to Dec
All 12 sheets exactly the same (different data)
In column F12 to F62 is a range of numbers like 1010, 1056, 1168. All
are four digits and there may or may not be repetitions of the
numbers. The numbers could be any number from 1000 to 1200 (total of
200 possible numbers)
In column G12 to G62 there are 5 different names. Bill, Bob, Mike,
Helen and Sally that may or may not be repeated or not entered.
On a separate sheet I need to figure out the following.
In rows I want to put all the numbers.
In columns I want to put the names.
What I want to do is to count how many times Bill gave away item #
1056, 1137 etc. So that in the column below Bill beside each number
it will give me a total of instances Bill gave that item away in 12
months or a 0 if none of any number. It would be nice if it auto
updated when Bill gives away item # 1423 next month.
I want to do the same for all five people.
I have visited many web sites and tried numerous formulas but just
cannot get anything that works.
I have a Main worksheet, 5 Operational worksheets and 1 worksheet containing data tables.
I want to in the Main Worksheet count, as a total, the number of times a word eg "Aviation" appears in the same range for each of the 5 Operational worksheets. For example,
=countif!'Aviation','team1',a6:a50,'team2',a6:a50,'team3,a6:a50,'team4',a6:a50,'team5',a6:a50
I'm Tim, and I'm just an average Excel user who found his way here through Google. I did a little poking around and this looks like a great community. Maybe I can contribute on future visits.
I'm wracking my brains over this one but I can't seem to get anywhere. What is easy on a single worksheet becomes a conceptual nightmare when extended across multiple sheets........
I have an Excel 2007 workbook with ten worksheets, each is 5 columns by *about 50 rows. My column headings are the same on each sheet. All of the cells are formatted as Text.
How can I count the number of selected worksheets in VBA? I've been looking in the Excel object model, but with no avail. Perhaps I'm overlooking something simple.
View 2 Replies View RelatedI have a spreedsheet that has 5 worksheets in it named game1 thru game5 i want to count games won and games lost from each worksheet. how do i do that? the games won and games lost in the same cell on each worksheet.
View 9 Replies View RelatedI am trying to figure out how to count all open workbooks, then count all worksheets within the workbooks and come up with the total amount of worksheets in a message box. I know that it sounds very simple and probably is, but I really can't figure it out.
View 6 Replies View RelatedMy workbook contains 30 worksheets with identical layout, named 01 to 30. I'm trying to count the number of sheets in which the value of cell B12 is less than 0.6, using the following formula:
=countif('01:30'!B12,"<0.6")
However, it returns a #VALUE error, although it works fine on a range of cells on the same worksheet. Does Countif not work across multiple sheets? If not, is there another way to achieve the required result?
I have a function that counts my worksheets and I reference that to a cell so another macro that creates a new worksheet will be named +1 numerically. My problem is I need it to anchor on "MISLC" and count to the end of the workbook. Or start on the last sheet and count back to "MISLC"
VB:
Function Sheets()
Sheets = Worksheets("MISLC").Index - 1
End Function
I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies View RelatedJust need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies View RelatedLet's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies View RelatedHow do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...
View 3 Replies View RelatedI need to write VBA code to clear all Values, all values beginning with an = sign for eg = 9725, except formulas and text on all my worksheets, except the last 2 worksheets.
View 9 Replies View Relatedsee my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
View 2 Replies View RelatedI need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedColumn A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
View 3 Replies View RelatedI am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedVBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.
View 7 Replies View RelatedI require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80
Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View 2 Replies View RelatedI have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
View 4 Replies View Related
