Automatically Add Data To Separate Worksheet & Stop Duplicates
Sep 27, 2009
Need to write the VBA code required to automatically add the names of the buyers & sellers as the auction info is entered on the Auction worksheet to the Transactions worksheet of the same workbook? Any member name should only appear once as this will be the list whereby we will generate the receipts by Location order when auction is finished.
I have a worksheet that logs equipment activities. Equipment may already have a standard unit # assigned to it or it may need a temporary unit # assigned for tracking. In a separate worksheet is a column of predefined temp unit #'s that can be assigned and next it is a column to place an "X" once a unit # has been assigned.
I need to write logic that, when an "X" is entered in Column F (Assign a Unit #) of the Activities worksheet, the Unit # (Column G) will automatically select the next available Temp Unit # in the Assign worksheet...and mark that Unit # as no longer available. Quite frankly, this may be more easily done with VBA, but I am not experienced in that at all. I have attached a sample worksheet showing the format of the unit # to be assigned, etc.
I have just looked through most of the postings I could find on the board regarding VBA to identify duplicates. Virtually all of these use the entire column when checking for duplicates.
I am after code which will identify duplicates in column A within a contiguous range of data. For example there is a heading in column B and below this photo details will be entered and in the next column the photo number is entered. Finally a number (for sorting) is entered in column A. The photos will be numbered 1 to whatever. So I need code which will highlight duplicates in that contiguous range of data. Then there is one or two blank rows before another batch of photo details are entered. This means the same sorting numbers are used and are separated by a blank row or rows.
Let's say I have a document with 10 different sections in it. I download it from another piece of software so there is a header/etc on each page. Each page has the name of a company on it in the A column and the name of a section on it in the cell directly below the company name. (Lets call the sections candy, toys, medicine, etc.) I want to separate the information by creating a new sheet for every section and name it toys_sheet, candy_sheet, medicine_sheet automatically. How could I do this?
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I have tried both of the following scripts however they are not stopping duplicates from being entered, I have references ticked.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column = 2 Then If WorksheetFunction.CountIf(Columns(2), Target.Value) > 1 Then Application.EnableEvents = False Target.ClearContents MsgBox "You must enter a unique value"
I would like to put together a macro that would compare a list of part numbers against a database, and recommend alternative vendors for the part. The actual VBA I think I can handle, my problem is with the formula, array or whatever is needed to return the results I am looking for.
I have attached a sample workbook to this message that contains two worksheets. The "Sample Database" is an example of the format of the database (in Excel format) that I will be looking against. This data may be a hundred columns wide, and thousands of rows long.
The "Vendor Reference" worksheet shows an example of the data that would be returned if the "perfect" formula were entered into the cells. (I'll explain what I mean by "perfect" in a moment.) It also has an area designated for testing formulas to see what is returned. It's blank, because none of my tests returned anything but errors.
You will notice the column headings on the "Sample Database" worksheet. Columns A and B will always contain the part number and product description. The remaining columns will contain vendor specific data, with perhaps 25 different vendors, and 3 columns per vendor. These columns would be "PV", (for Primary Vendor), the vendor number, (010299, for example), and the Vend Part#.
If there is an asterisk, "*", under the "PV" column for that vendor, that means they are the "Primary" vendor. The cost from that vendor is listed under each vendor number. There may be instances where 2 different vendors are listed as primary. If that's the case, the formula can simply return the FIRST one found.
Here's what the "perfect" formula would return: .....
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
Im working with a huge amount of data in BOOK1.xls and once or twice a week I received an update of the list.
1. I need to compare and find out from the new updated worksheet if there is a new revision, and if there are new documents added to the list. I have tried Vlookup..but it didnt work for me. Ex. Doc1 has revision 1, 2 in my BOOK1 that I am working on. Note that there is a repetition of the DocName, Doc Number except for the revision.
I've looked through the threads and while I have used Data Validation to stop duplicate entries, I want to also make certain that those entries are only Dates. In other words, if Cells A1:A10 are to contain unique dates, I use Data Validation with the Custom condition below; = COUNTIF($A$1:$A$10,A1)=1
If the user enters the same date more than once, an error message pops up. However, the user is not prevented from entering a range of dates in a cell such as "July 5-7". How can I validate that the date is entered only once AND the entry is a valid Date. With Data Validation it seems I can specify to allow a DATE with specific criteria, or the Custom, but I can't see how I can do both.
I am trying to force users to enter data in 5 separate cells in a worksheet. I have tried editing code I have found here, but just can't get it to work.
It is in the second sheet of the workbook and the sheet is called Invoice - the cells I want to force entry into (and the message I need) are as follows.
J2 - You must enter the salesperson's name J4 - You must enter the customers name J5 - You must enter the customer's address J6 - You must enter the customer's postcode L2 - You must enter the Invoice number
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
I have a workbook, in which I will have approximately 5 worksheets. The 1st worksheet will be a summary table, which will pull data from the other 4 worksheets. These 4 sheets have data of 4 companies, thus representing 4 companies. In the 1st worksheet, I have a drop-down list that has selections for each company.
How do I make it so that when I change the selection from A company to B company, the data in the summary table will automatically pull data from corresponding worksheet? For example, if 2nd worksheet represents Apple Inc, the 3rd represents Microsoft, how do I reference from 2nd to 3rd worksheet automatically when I change my selection from Apple Inc to Microsoft in the 1st summary table sheet?
We use work order worksheets in excel with basic information: Date in, work order #, account, date out, total # of days, work conducted by, number of samples, description of sample, etc. Each work order has an individual worksheet. The information in these worksheets eventually get entered into a work order log containing the same information in order to compile a quarterly report. We might have 400 work orders in a quarter.
My question is: How do I link the individual worksheet to the work order log in order to get the data to transfer automatically when a new work order is entered into a worksheet? I'm able to get the first work order to link to the log worksheet, but CAN NOT figure out how to get subsequent work orders to enter into the following rows, rather than just replace the first row over and over.
I have 2 worksheets that share some of the same data. However I do not want to have to populate the same information twice. Instead I want to be able to type the information required in the one worksheet and create an instruction for the data that overlaps with the second worksheet to automatically load. The catch is I need it to find the next blank row every time to add the data. EG
Worksheet 1 has columns: Name, ID Number, Date, Gender Worksheet 2 has columns Name ID Number.
I want to be able to input data on worksheet 1 only and the the Name and ID number will be added to the relevant columns in worksheet 2.
I'm looking to automatically move data from my working worksheet, when a particular column states "Won" or "Lost". I'm hoping the entire row of data can be cut, and added to the appropriate sheet, determined by "Won" or "Lost".
I have a command button that I want to automatically copy and paste certain data to another worksheet when clicked. I keep getting a "runtime error 1004; application-defined or object-defined error". The code I have so far is:
I am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
I need VBA code to automatically send an email notification when data is added to worksheet. I am not very familiar with writing code and have been using other code from other posts. Ideally I would like it to send an email notification with the added information attached, in this case it would be Row # and Columns A thru O.
I want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.
I use Excel mainly for creating & updating simple logs, and the problem I keep running into is that when I click in a cell, it will automically select & highlight multiple cells below the one I am trying to work in. It will select anywhere from 4-5 cells up to 13. I don't know what this function is, and I don't know how to fix it. But it makes it very difficult to navigate and cut/paste or change a formula.
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.