No Count Formulas By Subtotal
Feb 25, 2009i want to count only nonblanks cell and based other threat i try modified the formula, but this doesnt count. how can i defined this forumula to count only nonblanks cells?
View 2 Replies
ADVERTISEMENT
Enter Formulas Only On Subtotal Rows
Jun 22, 2012a huge spreadsheet that is taking up way too much time. It starts out with 6,000-7,000 rows, but then, she does Subtotals & it grows to nearly 10,000 rows! Then she has to deal with each & every one of the Subtotal rows, by hand. Here is a small sample of the spreadsheet, after the Subtotals have been applied:
Manifest Dttm
Manifest No
Carrier Scac
[Code].....
This sheet has columns A-Q. The key columns for our purposes are K (Weight In Lbs), L (Pickup Charge) and M (Consolidation Charge). We need to add information to column R on each SUBTOTAL row only! On each row there will be an amount in EITHER column L or column M, but not both.
1) If the amount is in L and K is LESS than 488 then R needs to show 44.39.
2) If the amount is in M and K is LESS than 124 then R needs to show 3.82.
3) If either
a. The amount is in L and K is 488 or HIGHER or -
b. The amount is in M and K is 124 or HIGHER
THEN R needs to show a formula to do this: (L+M)/(K/100)
Is there a way to either put a formula in just the Subtotal rows to accomplish this or (preferably) have a macro enter either the 44.39, 3.82 or the formula? I was able to come up with a formula that gets the correct amount in col R. Here's my formula:
Code:
=IF(AND(M3=0,K3123))),SUM(L3:M3)/(K3/100))))))
SubTotal Count(2)
Jan 15, 2009I a formula in one of my cells so that when the data is filtered it will add up all the cells that have a yes in them. However I'm getting an error. If I use the countif formula it still adds all the cells with yes that are not in the filter selection.
View 4 Replies View RelatedChange Sum To Count In Subtotal
Oct 6, 2008I am working with some data that needs to be subtotalled. All the fields are subtotalled by sum, although 1 column needs to be count.
I was planning to do the subtotal (by sum) for all the data and then get the macro to go and change that 1 column to count.
My problem is that this will be a weekly report and the number of rows will vary, so how can I changet the sum to count without hardcoding the cell ref's?
Subtotal To Count Non-hidden Columns?
Mar 25, 2014I have a linear count from 1 to 160 (J3:FM3) and I hide columns manually over time depending on a certain criteria. However, I would like to count how many columns I have left. I believe you need to use the subtotal function, but I do not understand how to use it.
View 14 Replies View RelatedAdding Count To Each Subtotal Line?
Mar 8, 2014I use the Subtotal function to sum several columns during the subtotal function. I dont think I can run a subtotal doing the sums and counts. Is there any way to add the number 0f rows in each subtotal? Count? I'm not sure how to go to each blank row (subtotal line) and count/add the number 0f rows in that subtotal?
View 4 Replies View RelatedExcel 2013 :: Unique Count In Group SubTotal
Apr 16, 2014Using Excel 2013.
Is it possible to get a unique count in a group subtotal though the elements in the group may not be unique using Pivot Tables w/o resorting to Power Pivot?
Ex
Group 123
Group 456
Are both members of NorthDivision
If someone is in Group 123 for 9 months, then Group 456 for 3 months, that membership should be reflected in the correct group accordingly.However, that person should only be counted once in the NorthDivision, not twice.
Output:
Group 123 0.75
Group 456 0.25
NorthDivision 1
At first glance, it appears easy, however, what if membership is only total 3 months?Then Group would increment 0.25, but I need NorthDivision to increment 1
Count Of Unique Entries As The Subtotal Of A Pivot Table
Jan 28, 2010I have attached an example of what i am trying to do. I can work out how to calculate unique entries by putting in a formula under a pivot table, but is it possible to select an option in the pivot table settting which will give this result?
View 2 Replies View RelatedSubtotal With Condition (only Count Values Greater Than Zero When Data Is Filtered)
Oct 24, 2007=SUBTOTAL(2,A2:A100) can be used in combination with any other formula so that when the data is filtered using autofilter it will only count values greater than zero.
I have attached a worksheet with the example.
In the attached workbook subtotal formulas are used in Row1 for sum and row 2 for count.
When the data is filtered using code "DUP" in column D, the subtotal in cell C2 is "4", whereas in the specified range there is a positive value in only 1 cell that is $1050 in cell C99.
Is there some combination that can be used with SUBTOTAL formula so that it will only count values greater than zero when data is filtered.
Using Two IF Formulas (3 Or More To Count If Other IF Formulas Are Actually Returning A Value)
Aug 24, 2009I have a spreadhseet with various functions on it and what I am trying to do is this.
Cell E4 returns a >35 or <35 true or false value
Cell G4 is either blank or has "Yes" text type into it.
What I am trying to do is get cell F4 to return certain arguments.
E4 = >35 and G4 is blank I want it to state "Email Hiring Manager"
E4 = ,35 and G4 is blank I want it to state "Wait"
I have a basic IF formula that returns this
=IF(E4>35,"Email Hiring Manager","Wait")
Then if cell G4 is populated with a Yes the formula needs to overwirte the origonal if with the return arguments of
=IF(G4="Yes","Email Agency","Email Hiring Manager")
If yes then what would be Email Hiring Manager (yes will only be input if E4 is greater than 35) will be overwritten with "Email Agency"
Can this be done with two If formulas or does there need to be 3 or more to count if other IF formulas are actually returning a value?
Sort By Subtotal, Make The Subtotal Stand Out
Feb 5, 2007way to do this but i have a sheet that is into 5 - 6 thous rows, in one of the columns (names) i sort it by names and then order it by subtotal for certain values.
What i need to know, is there anyway i can take just the subtotal values out and put onto another spreadsheet without copying and pasting it all as there are lots of subtotals and this would help alot as the other info is not nec. just the subtotal'd info. either that or is there anyway i can highlight the subtotal'd row info in yellow/bold text anything like that that would make it stand out without having to do it manually?
Subtotal Formula - To Show Up In The Subtotal Value Column
Oct 23, 2008I’m trying to get my sheet so that at each change in month it creates a sum of the value but I want to sum to show up in the subtotal value column.....
View 10 Replies View RelatedSubtotal Condition: Count For The "YES" Only
Aug 13, 2009I have a column that contain YES and NO, I just want a count for the "YES" only.... is subtotal condition the best option to use if so how?
View 3 Replies View RelatedCount Number Of Formulas Used?
Jul 24, 2009Is there a way for excel to tell you how many formulas (formuli..??) you have in a spreadsheet?
View 6 Replies View RelatedCount Cells Which Have ONLY FORMULAS
Apr 30, 2009Lets suppose i have 5 columns of data. 3 of the cols have "formulas" in them and 2 do not. I want to count the number of formulas that are in a given row. Is there a way to do this?
View 3 Replies View RelatedCount Formulas In Range Being Subtotaled
Jul 16, 2014Is there way I use the count formula without it counting the formulas in range being subtotaled? I have a address tab in a spreadsheet with column headings first name, last name and address. The information is only filled in from another tab (active) in the same worksheet when there is a value in the cell on the active tab. The formula on the address tab is =IF(Active!$A107=0,"",Active!$A107). If there is not a value on the active tab in a cell I don't want to see it on my address tab but the count formula treats it like a value. I want the results to only to count if a result is on the address tab.
View 4 Replies View RelatedCount Cells Combined With If Formulas
May 21, 2014My spreadsheet looks something like this:
ID
Responsibility
Criteria One
Criteria Two
Criteria Three
Numbers
Functional Column
ID1
Marc
lorem
lorem
lorem
1
x
[Code] .......
I want to build a little report on another worksheet that goes over the table and counts cells (i.e. data records) based on the entries in the last column (i.e., if the corresponding data-record has an "x" in that column, then it should be counted).
As every data record also carries a numeric value in the "Numbers" column, I wanted to do this with COUNT formula combined with an IF-formula.
The formula to count the corresponding data records that match the criteria then looks something like this:
=COUNT(IF($F$1:$F$6="x";$E$1:$E$6))
However, this always counts all cells in the "Numbers" column. I want the formula only to return the range of "Numbers" cells, that belong to the matched data records.
Is there an easier or cleaner way to do this?
Count Nonblanks (Formulas In All Cells)
May 29, 2009What formula would I use to count the nonblank cells, if all the cells within the range have formulas in them.
For example, cells A1:A50 each have a formula. As a result of the formula in the cell, 10 of the cells have values or text while the remaining 40 cells appear blank. What formula do I use to count the 10 cells?
Count Number Of Formulas In A Spreadsheet
Jun 11, 2009For various reasons, I need to determine how many total calculations are being performed in a spreadsheet. These can be IF statements, sum, max, vlookups etc but I am looking to determine the quantity. I do not need to know how many of each just how many in total.
Is there a relatively simple method of conducting this search? I don't mind VBA code, etc.
Count & Summing Formulas Containing More Than One Variable
Sep 17, 2009I am trying to create a formula that will count the number of entries that contain either a name of 'A', 'B' or 'C' and fall within a set date parameter.
I am currently using this formula (which works perfectly well for 1 variable but not for multiple), where column B is my date and column R is my name field.
=COUNTIFS(Extract!B:B,"
Copy Formulas Or Using The Auto Fill Need To Have The Count Inc By 5 Instead Of 1
Apr 17, 2009I have the following formula:
=AVERAGE('sheet 2'!C7,'sheet 2'!D7:Z7)+AVERAGE('sheet 2'!C9,'sheet 2'!D9:Z9). When I copy it down to the next cell the valules need to increase to 12 & 14 respectively.
Excel 2010 :: Count Number Of Populated Cells Containing Formulas?
Jun 26, 2013Excel 2010
Sheet 1 contains range B12:B353 with names of people. Sheet 2 range B12:B353 contains a formula to extract the names from Sheet 1 if range D12:D353 contains a certain value:
=IF(Sheet1!D12:D354="A",(Sheet1!B12:B353)," ")
At the bottom of each column in Sheet 2 I am trying to get a total count of populated cells (a running count of names actually visible). I have inserted formula:
=COUNTA(B12:B353)
Which should count the number of cells with text in them, right? But I believe it's somehow counting the formula as text because I inserted the value of "A" in Sheet 1 Column D for 3 names. It returned a number of 331 at the bottom of my column in Sheet 2. First off, a return of 331 doesn't make sense in any way (still scratching my head at this return. It should have returned a value of 3.
Using Cell References In File Paths For Formulas To Create Dynamic Formulas
Dec 3, 2013I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
Converting Formulas To Relative/absolute References With Formulas Referencing Other Sheets
Dec 15, 2008I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies View RelatedFormulas To Hide Partial Concatenate Data And Determining Two Other Formulas
Dec 11, 2013I'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.
I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?
Excel 2007 :: Formulas In Cells Not Being Recognized As Formulas?
Jan 10, 2013I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies View RelatedPaste Formulas As Values (strip Out Unwanted Formulas)
May 13, 2008I have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
Hide Formulas From Formula Bar While Still Having Formulas Active?
Jan 16, 2014Is it possible to hide formulas from the formula bar while still having the formulas active?
View 8 Replies View RelatedSubtotal In VBA ...
Apr 3, 2009Trying to do a Subtotal in VBA...
View 13 Replies View RelatedUsing =SUBTOTAL
May 10, 2007I seem to be experiencing a problem using the SUBTOTAL formula. Is it not possible to use subtotal in a running command? ie [A2] = SUBTOTAL(102,A$1:A1) then drag for a couple cells vertically. "0" is displayed for ALL dragged cells.
View 9 Replies View Related