In the above pic I need a formula that goes down column B, looks at column A, picks out all the different numbers from column A, orders them lowest to highest and separates them with a comma. The words in column A of course are ignored.
View 9 RepliesI would like to create a formula that will select a 7 digit order number that begins with an 8 or a 9. For example in cell "AI3" I have the following:112972/8517223.
I would like cell "AH3" to capture only the number 8517223. Also, instead if that cell had 9000954 if would like "AH3" to have that number as well. In addition, if cell "AI3" was blank, I would like the formula to also search in columns "AJ3", "AK3" and "AL3" for a seven digit number that begins with a 8 or 9.
how would I go about pulling the three sets of numbers out of the following example:
Detected 2 resets. Imported 16 out of 22 bookmarks.
These sets of numbers could be single, double, or triple digits. I need to find the percentage from the second and third set of numbers in the long run.
I have a spreadsheet with data of customer orders. I am looking for a way to pull the customers who have placed an order between January and August, but did NOT place an order in September (in order to reach out to those customers who have stopped ordering).
I can't post attachments for some reason, so this is a description of how the sheet looks.
Column:
A - Delivery Date (MM/DD/YYYY)
B - Month (MM) --> formula created to pull month from column A. For example 2/12/2013 returns "2"
C - First Name
D - Last Name
I need to find a way to create a list of customers, without duplicates, who placed an order previous to Sept, but not in Sept. So, pull unique names from column C and D that have an entry in column B of 1-8, but NOT 9.
I have a set of data in once cell and its strung out. I'm trying to pull the numbers that follow certain words from that data. That's easy enough with the find and mid function for the first one. But after that I have a repeating word (see below) and different numbers that follow it. So I want to pull the second number string after that word, the third and so on.
I've attached an excel file that explains this better.
The below is an example of some data I have in a workbook ...
Basically I need a formula to look through the data and search for any fails within Column A then I want it to pull the Reason
The Pass / Fail could appear anywhere within the range and we will only get a reason for any fails
A B
1Result Reason
2Pass N/A
3Pass N/A
4Pass N/A
5Pass N/A
6Pass N/A
7Fail System Error
8Pass N/A
9Pass N/A
10Pass N/A
11Pass N/A
I have a large block of numbers in a spreadsheet and I am wondering how I can look at the whole block and pull out the top five most common numbers. So perhaps the number 4 is repeated the most times, it would be number 1, number 18 might be repeated the second most number of times so it would be in the number 2 slot etc etc.
View 6 Replies View RelatedI'm trying to pull some numbers from another column. I want to pull the numbers that have an X separating them like 7X125, 48X192, and 27X90.
Example:
FA, VF-2000-3-7X125-18-A, AFS
FA, VF-2350-48X192-6-RGB, FC
FA, VF-2020-27X90-18-A,RFI, FEX, ACP, 2IT
i have a list of names which also contain e mails addresses after the names, they are displayed as (In column B onmy spreedsheet)
Armani Stevens/GB/companyname/GB@soso
what i need from the above is just the name (up tp the first backslash)
so i would need Armani Stevens and disregard the rest.
What i would then need to do is to take the name and then see if the names is in the list which is situated in column A,
so to sum
once i have Armani Stevens extracted from Coulmn B i would want to see if this name is in Column A
Names are obviously of all different lengths and there is always a space after the first name and surname
My Cells contain loads of text like this: ["16733:0:0"] = “Product ID”:1:1:0", now what i need is just the 16733 to be extracted into its own cell, and the Product ID to be extracted into the cell next to it... all other Text can be deleted. The problem is, pretty much the whole of the text changes in each line :-
["12345:0:0"] = “Product ID1”:1:1:0",
["49573:0:0"] = “Product ID23”:4:8:0",
["2649:0:0"] = “Product ID485”:18:23:0",
["9264:0:0"] = “Product ID0473”:2842:2341:0",
["54321:0:0"] = “Product ID85647”:99:199:0",
In the Numbered part of it (the bit I actually need), it would be either 4 or 5 digits long. Im guessing what I need to do is remove parts bit by bit, but for a novice user - Its proving a bit difficult!
If I have a column of order numbers like this:
PPD789963PPD789964PPD789965PPD789966PPD789967PPD789968PPD789969
How do I extract only the numbers so they look like this?
789963
789964
etc...
Left function?
I want to input numbers into a master sheet by having it referenced to a name. For example; I will be inputting a report on monthly sales, which contains a company name, and then a value. However, this report doesn't always necessarily contain all the companies listed on the master. I want to simply put this report on a page, and have the referencing pull the numebrs to the approriate company on the master page.
In the attachment - I want the numbers from Sheet 2 to be entered into their appropriate match in the Master sheet (sheet 1) - without copy and pasting (becuase in reality, I have 200+ company names and numers I'm dealing with).
I am working on a spreadsheet in Excel '07 that will pull data from online and reformat it in a way that another program can digest. The last thing I need is for excel to recognize if there is a 6 digit number in a specific column.
This is tricky for two reasons:
1. Numbers come in three different formats, ### ###, ######, and ###.###
2. Sometimes there is also text within the cell, however I need to pull out just the 6 digits, and place them in another cell with format ### ###
The title of this thread is the best way I can describe what I wish to accomplish. You see, I have a column of information requests in an Excel spreadsheet, each of which his tagged with an alphanumeric request number, and I wish to sort and/or perform and min/max function on the request identification. However, each ID has a IDR in front of it - for instance, IDR000452 - and the letters make the system read the contents as text. Does anyone know of a formula I can use to create a new cell which contains only the numerical contents of the above example?
View 4 Replies View RelatedIm totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
View 4 Replies View RelatedI'm looking for a formula that will rearrange a row of numbers in numerical order and by their last digit also in a numerical order, I hope it's clear enough !!!
ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAF1
2Â 1235781114162022273139667197110113128136139153225250328428508576772Â 3
4Â 2011025011131712227723113153145225166613657672797812832842850839139Â 5
Way to create order and quote numbers. I'm currently starting an order number with a "O" in front of the order number and a "Q" in front of the quote number but this presents a problem when trying to create the next consecutive number because the number has a letter at the start of it so I can't use the method plus 1. I'd just simply remove the "O" and "Q" from these numbers but I need the numbers to be unique from each other and putting the "O" or "Q" in front was the only thing I could come up with to avoid the numbers ever being identical. I often need to look up these numbers and return the values in that row so the numbers need to be unique from one another.
The information for quotes and orders is saved on separate workbooks but I'd still like the numbers to be unique from one another.
Having a letter at the start of each number or a work around for using the plus 1 method when you do have a letter at the start of the number?
I'm using the vlookup function to pull numbers off an array. Is there a way that I can get the vlookup function to pick the smallest number greater than or equal to my Look_up value. If not is there a function that can do that?
View 9 Replies View RelatedHere I have some samples of data from row A1:V1 that I want to arrange in ascending order through A4:V4.
For that I’m using the formula below in cell A4 across V4
=SMALL($B$2:$W$2,COUNTA(B2:$W2)-(COUNTA(B2:$W2)-COLUMN(A2)))
Sample data
ABCDEFGHIJKLMNOPQRSTUV11230507801011121314150170192002523400000012357810111213141517192025
But I want to arrange them leaving zeros as shown below in A4:V4
ABCDEFGHIJKLMNOPQRSTUV11230507801011121314150170192002523412357810111213141517192025
formula to identify consecutive numbers in order, but having trouble figuring out how to identify consecutive numbers in random order.
Cell M1,N1,O1,P1, and Q1 each have a number, 1,4,9,3 and 7.
We have 3 and 4 being consecutive number but they are not in order, would like help in a formula to put a 1 on an empty cell S indicating that there is a consecutive number with a 1 if there are no consecutive numbers then it would give a 0.
The current formula only works if the consecutive numbers are in order, 1-2, 3-4, 5-6, etc...
=IF(SUMPRODUCT(--(N1:Q1-M1:P1=1)),1,0)
I am using the autofilter function on a spreadsheet and the first column displays numerical data ranging from 1 to over 100. When I apply the 'Sort Ascending' from the autofilter on this column, it is attempting to display the data in alphabetical/numerical order however the order it is displaying appears such as this 1, 10 , 100, 101, 102, before moving on with data that starts with 2 (2, 20, 21, 22, 23 etc). Is there a way I can filter this column to display literal numerical data such as 1, 2, 3, 4 etc?
View 2 Replies View RelatedI need to create a purchase order page whereby each item is then transposed into seperate sheets detailing the product along with price etc. I need the po number to be automatically generated to follow on from the previous therefore giving us a continuous po thread. I also need the purchase order as typed to be saved into a seperate sheet / file each time so that the po is always blank when someone else creates a new post
View 4 Replies View Related- I have a list of 8 digit numbers in Column A sorted small to large
- Some of the 8 digit numbers are duplicated.
- In Column B I would like to have more of a combination of countif and listing the duplicates in order (1 for the first dup in the column, 2 for the 2nd, etc.)
Example of what I'd like to see
Column A Column B
123456781
123456782
132546841
685036541
985413561
985413562
985413563
As you can see if the number in column A is on the list one time column B would show a 1If the number is shown two times (the first time it shows up will show a 1 the second will show a 2) If the number is shown 3 times (the first time it shows up will show a 1 the second will show a 2, the third tiem would show a 3)
I use excel 2007 and got this ques:
I got 2 columns (A and B) with random numbers and i want that in column C
I will get these numbers in ascending order with no duplicates
for instance:
a b
7 2
6 3
2 11
9 1
c
1
2
3
6
7
9
11
I have a list of numbers in cells A1:A10, these numbers change frequently. I would like to set up a formula to calculate the 3 lowest values from those numbers and list the three lowest values in cells J1:J3, with lowest value on J1 and the highest of the 3 values in J3.
I know I can use the small/large functions for this, but im not sure how to work it out to use just the 3 lowest values.
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI wanna sort these numbers in descending order and related to each others in excel 2010.
H
G
F
E
D
C
B
A
1383.99
1533.954
831.197
1533.954
1533.954
1383.99
700
1533.954
1
[Code] .........
About descending and related to each others, I mean for example : #700 in column A,B,C,D,E,F,G,H places in the same row and the same happen to #1533.954 and others. About the numbers that are The One ( like 549.894), I need to put them in its column and a new row with empty cells in its other columns. In the end i want a table like this:
H
G
F
E
D
C
B
A
1533.954
1533.954
1533.954
[Code] .........
Cells in row C have numbers (number of days between date a and date b)
I want to group the days so I can run a usable pivot table as follows:
Up to 7 days between update date and today (ie 1 week) 8-14 days between update date and today (ie 2 weeks) 15-21 days (ie 3 weeks) 4 weeks +
My attempt is as follows but only give two results and not 4?
=IF(OR(C2<=7),"1-7days",IF(OR(C2>=8,C2<=14),"8-14days",IF(OR(C2<=21,C2>=15),"15-21days","Over4weeks")))
I have a column (B) of randomly generated numbers 1-14, and am using this formula range to sort in descending order and return the relevant value from column (c).
=VLOOKUP(LARGE(B3:B20,1),B3:C20,2,) to =VLOOKUP(LARGE(B3:B20,14),B3:C20,2,)
Works great, except when a number is duplicated, (E.G. 14,13,13,12,11,10,10,9,8 etc). It then returns the first value from(C) repeated, and not the value from the second and subsequent duplicated reference numbers.
I need to create a formula that will automatically give a ranking based on where the revenue lands in between. If its between the range then it gets an A-F ...
View 9 Replies View Related