I have this code as mentioned below.
If a cell in column U is empty, I mean really empty, so no zero but a blank cell, I want to hide the whole row. Is this possible?
Sub kleuren()
For Each c In [U3:U500]
If c "" Then
Select Case c - Date
Case Is
I'm looking for a way to hide a row if the cell is column A is empty. On the attached sheet I'm looking to hide the empty rows below the last vehicle registration.
View 2 Replies View RelatedI want to hide the row when value "x" is entered in column C
I tried this code in the sheet, but nothing happens.......
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = 3 Then
ThisRow = Target.Row
If Not Target.Value = "" Then
ThisRow.EntireRow.Hidden = True
End If
End If
End Sub
So when a "x" is entered in cell (115,C), row 115 must be hidden. When a "x" is entered in cell((9,C) row 9 must be hidden to, and so on. When a cell in an other column is changed, the macro does not need to start.
I have read other posts about this but I am still a little confused as most macros that have been made are tweaked to suite the users individual needs.
What I want is something like this to work in the active sheet:
If cells D2:D55 = ""
Then Hide.EntireRow
If cells D2:D55 = "has any value"
Then Show.EntireRow
The values in D2:D55 are populated by a VLOOKUP depending on what someone chooses in a drop down validation list, however not all the rows are always required so I would like to hide them to save some space on my form.
I am trying to run a macro that will hide rows when one cell is empty and another is not. Example: hide row when cell g is empty, but cell b is not. Or something to that effect. So far I've only used this code, but I would like to know how I can modify the code to fit the parameters I need:
Sub HideRows()
On Error Resume Next
With Range("B1:B300")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
End Sub
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View Related(Excel 2010): Hide row if cell C in this row is empty.
I've just started using macros and I'm sure there is one for this problem.
I need a formula, or a filter (or something?) to hide zeros in a column, but only when the corresponding cell in column A is empty.
View 11 Replies View RelatedI have more than 50 different sheets with columns A to AA where i would like to hide all empty columns. If for example column K is empty auto hide column K. I also have rows 1, 2 & 3 which have headers which need to be ignored when checking the columns.
View 12 Replies View RelatedI have the code for hiding rows. But the problems is it only works with numbers like 1, 2, 3, 4 etc.... I would like some help to modify this code so it work both for numbers and letter (A, B, C, D) etc ...
View 9 Replies View RelatedI have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I have code which will hide columns L to AA if cells are empty. It works fine.
I want to modify it to consider rows 3 onward down. It means even if rows 1 & 2 are populated and row 3 onwards down are empty, then it will hide it.
I tried but it is not working .....
I have about a dozen tabs, all of which have vlookups in them and calculate based on what a user pastes into Sheet 1. I need a macro that hides all tabs that have no data, essentially tabs where A1 = ""
However, it also needs to unhide tabs as soon as there is data. So if the user pastes new data into Sheet 1 the vlookups, on the other sheets, still need to run (even if they are hidden) and then check against the macro to determine whether to be hidden or unhidden.
I am trying to write a code that would hide when certain cells in the worksheet are empty. Also the sheet name should start with a -.
This is the code i have so far. The thing is that the sheet will always hide. The criteria on the cells doesnt work.
Sub Hide_all_filled_Templates()
Dim ws As Worksheet
Application.DisplayAlerts = False
For Each ws In Worksheets
If Left(ws.Name, 1) = "-" Then
If Not Range("I9").Value = "" Or Range("K9").Value = "" Or Range("M9").Value = "" Or Range("O9").Value = "" Then ws.Visible = False
End If
Next
Application.DisplayAlerts = True
End Sub
The code now hides all shees starting with "-". It does not take the cell criteria into account. Why?
Other point is that these cell references are just a few of what it should really be. How do I make this easier for myself to write the code. Point is that these cells come in row 9 (like the example) then in row 11 then in row 15, 17, 21,23, etc. Also the columns jump with uneven steps.
I am trying to hide empty columns, excluding the header, from data that has been auto filtered. I can accomplish this when the data is not filtered by hiding columns that are empty below the header.
My question is: How do I get the "For each Col in Activesheet..." loop to only apply to the filtered values and not those that are hidden.
Im looking for a macro that hide empty rows. I found some simple macro but that are long to execute. While looking for a faster code, I found two codes that work pretty fast. But as I don't understand VBA I am not able to adjust them to my situation.
First macro: I am able to specify my range (B6:B77), but the macro applies to blank cells and I need to apply to "" cells.
[Code] .....
Second macro: very fast as well. Here, it applies to "" cells, but I am unable to specify a range. So the rows 1 to 4, which are empty, are hidden but should not.
[Code] .....
I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....
View 3 Replies View RelatedI've created an excel workbook to automatically create a report for my work. All you have to do is enter the data into the "DATA" worksheet. Easy. Only problem is that someone can easily ruin it if they try to run it when the "DATA" sheet is empty. I figure that if I can get two columns hide when it's empty and that would solve my problem. I've tried several VBA codes, but they don't work. Also, everything except the "DATA" sheet is protected to prevent accidently changes. This is the latest code I've tried:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "DATA!$P$5" And Target.Value = 0 Then
ActiveSheet.Unprotect ("password")
[Code].....
My company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.
View 3 Replies View RelatedI have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
View 6 Replies View RelatedI need to select all yellow tabs (color code 6) in a workbook with over 70 tabs and hide all empty rows within A1:I36 on each of these yellow tabs. the position of the tabs needs to be unchanged (sorting by tab color not allowed). I got this code from another excel forum but somehow it only works when i select one yellow tab and run it and the code only works on the one yellow tab i selected. can fix this code so that it can loop through all tabs (yellow and non color) and do what i mentioned above for each yellow tab?
Sub HideMT()
Dim Ws As Worksheet
Dim wsColor As Long
[Code].....
I am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.
I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
View 2 Replies View RelatedWhen I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedI am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc