I have a macro in a workbook that runs automatically when I open my workbook. The purpose of it is to find the last non-zero cell in column A of all but three worksheets in my workbook that are named 1 to n and enter the current date in the cell below it.
Once this is done, it is supposed to autofill the formulas from the last non-zero row in columns B and D down into the row that has the current date in column A. I don't understand what is wrong, because at one point the macro did what it was supposed to.
Since then, I added a "for loop" that makes the macro repeat for n number of sheets as opposed to one, and now all it does is adds the date in the last non-zero cell in column A in every sheet 1 to n....it no longer autofills the formulas down in columns B and D.
Here is a look at my
Private Sub Workbook_Open()
Dim xlWs As Excel.Worksheet
Dim fillRow As Long
Dim rng As Range
Dim i As Long
I have two formula's available for a cell. Its actual value, and a previously forecasted value. The actual value is found using an index formula and the forecasted value is a forecast function. i want to create a macro and link it to a button such that i can change which formula used in the cell accordingly. Is this possible?
I want to link cells from one sheet (totaldata) with the corepsonding cells in an another sheet (data), the problem is that the columns in these sheets to be linked are not placed in the same distance from each other - so a standard formula can't be applied her. I came up with the following piece of
This code links only two cells in the totaldata sheet, and this way I would have to make this code execute additionally over 30 such lines, which would force me to change the C[7] parameter to C[14] etc etc manually.
Is there a way to speed it up without having to produce such a long code?
I have a template work book that has several worksheets with numerous formulas thorughout.
For example; =SUMPRODUCT(--ISNUMBER(SEARCH("MCSH",P9:P218)),--ISNUMBER(SEARCH("HWD",G9:G218))).
When I set up another template for a different crew I manually have to go through the entire work book and change the crew identifier (MCSH) in every formula.
I need to find a way to autosort a series of numbers, inputted manually for example, in cells A1 through A15. The autosort function needs to put the numbers in descending or ascending (either way, doesn't matter) in cells B1 through B15.
In effect, if the numbers inputted into the first cells change daily, then the correct order of these be automatically sorted so that they are in a specific order.
The closest I can come WORKS, but I'm using about 300 filter formulas to do so.
Macros that will insert formulas into cells, and I've been able to modify the macros to insert additional (simpler) formulas well enough on my own. But I can't seem to find the pattern of where to put the quotation marks! Here's the macro code that will enter my formula, including the formula (and the portion of code that the debugger highlights):
r.Offset(, 1).FormulaR1C1 = _ "=VLOOKUP(rc[-1]"",""'Blend List'""!""A2"":""E250"",5,FALSE)" And here's the code in it's entirety:
Private Sub Worksheet_Change(ByVal Target As Range) Dim r As Range If Intersect(Target, Columns("d")) Is Nothing Then Exit Sub Application.EnableEvents = False ActiveSheet.Unprotect For Each r In Intersect(Target, Columns("d")) If r.Row 1 Then If Not IsEmpty(r.Value) Then...........
I am trying with no progress to join these parts of code to shorter part - to obtain formulas in format = 1 234 (for 1'123,342) in one. note, it is running after Application.Calculation = xlCalculationManual . It will makes my code much easier to read.
I am looking for some VBA programming that will allow me to use 1 button to consolidate rows (delete them). The problem I am running into is that the rows I want to delete have formulas in them so I can use "find all blank cells & delete" type of macro.
Capture.PNGCapture1.PNG
Attached are a couple of brief images on a small scale what I am looking to do.
I want a user to be able to have this sporadic list of choices, consolidate them so the are all one right after each other, then export to a word file for editing later on.
I am looking for a macro that will copy the row above it, to include formatting and formulas, however not the actual contents. I need the row that's being copied to be hidden from view, which is where the problem stems from. The macro is also copying the 'Hide' formatting and I want to exclude that. This is the current macro I am using:
I have below code which pin out numbers from IBAN in Column P. Its formulas run by macro. It works fine. But what i really need is that instead of putting the formula in the cell, is that it compare the value from the formula, with the excisting value , in each cell . And it mark the cells where there are a difference with yellow colour I have been thinking how to do this but cant really work it out. If some have a better solution its ok but i need a macro for it.
have a look at below code, which change the cell and correct the error, but which i want just to compare the values.
I have 2 speadsheets, I want to copy rows of Formulas from Spreadsheet 1 and copy them into Spreadsheet 2 but convert them into Values.
Is it possible to create a button on Spreadsheet 1 and assign macro to do exactly what i want? I also want the macro to look for the first empty row in the database so that the information being copied are on the next row and not overwritten.
I was tired of making my list smaller to upload it here, so I uploaded the complete thing on megaupload :P Here is the link:
http://www.megaupload.com/?d=1W6PBADE
On the bottom of the list is a button; "Add New Anime". When you click on that you get a UserForm where you can enter; Title, Type, Total Episodes, D/L Eps and Watched Episodes. When you press ''Add Anime" the entered values are entered at the bottom of the list, underneath the corresponding list names on the top.
Now there are 4 list names left (Left, Status, Status 2, and Progress (%)) I still have to make a option to enter Status 2 as well in the UserForm.
Now the question:
In columns F (Left), H (Status) and I (Progress (%)) are formulas. How can I copy those formulas automatically when I add something new with the UserForm? And can it automatically insert a new row, since I have to move the buttons down with every new title.
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
I am looking for a macro that will insert a new row and copies the formulas from the row above, but not from all the columns.
This is the current situation:
A B C D E F G H I J K L M
Name Project Nr. Work Order hours
[Code] ......
What I want is that if column G contains "11374340" an empty row will be inserted above and the formulas from column E until M to be copied a row down. And the sum function in the last row of M needs to be changed automaticly as well (if possible).
I already have the macro to insert a new empty row which is as follows:
Sub InsertRows() Dim i, LastRow LastRow = Range("G" & Rows.Count).End(xlUp).Row For i = LastRow To 1 Step -1 If Cells(i, "G").Value = "11374340" Then Cells(i, "G").EntireRow.Insert End If Next End Sub
I need to be able to copy a formula from a row that is 180 rows before the current cell.
I then need to edit the formula so that the rows all start at 6. then i need to change the column references.
The formula that I am editing looks like this after it has been copied from before:
=IF('Entry Form Portrait'!$d870="m",IF('Entry Form Portrait'!$n870="a",'Entry Form Portrait'!$a870,""),"")
So I need d870 to be changed to d6, the n870 to be changed to o6 (current column +1), the a870 to be changed to a6.
Then this resultant formula to be copied to the next column and a6 changed to b6, then copied to next column again and b6 changed to f6.
Then all 3 columns to be copied (or autofilled) down 105 rows.
I tried to do it by recording the macro, however it only works for the first time that i use it, and then just keeps repeating in the same place. I need it to use the cell i have selected as the starting point.
I need to paste the format and formulas of the last row of data into a new row beneath it. I've seen a bunch of different end row functions, but which one is best and how do I only paste the formulas and formatting?
I used VBA to write a number of formulas into various cells in a workbook. After the VBA is done running, I change the values in the cells that are referenced by the cells I wrote formulas in. The formulas do not update after I enter this new information. My calculation is set to automatic, and F9 doesn't help.
How do I change the code so that the macro looks up the next sheet (instead of by sheet number, which is how the code was recorded) and transfers data to the summary page until there are no more new sheets. See attached zip.
I have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25 - on a different column every month (same column across all tabs) - on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
I am creating a time sheet for a supplier & when the supplier enters a date into column A I would like a new line to be inserted below & include the formatting, formulas & data validation from the row above.
Is it possible to record a macro or write VBA to apply conditional formatting to certain columns of cells where there are exceptions/conditions for the different types of conditional formatting? If possible, can those exceptions/conditions be based on a specific type of formula?
See my DATA EXAMPLE picture linked below. On that example, Columns K-Q need conditional formatting but manager wants row 38 to be blue based on the fact that it is using a =SUM() formula. This represents one "part" out of 75 that could be on a given sheet, each "part" has a different number of sub-parts that are used. So I can't just highlight columns K-Q because of the occasional SUM row that needs to be blue.
The conditional formatting that I am currently using in Columns K-Q only apply to K3:Q37 and not to row 38 at all. I currently have conditional formatting on columns K-N, P-Q where when '=ISNUMBER(xx)' returns TRUE is white and when it returns FALSE is light orange. Column O uses '=ISTEXT(xx)' for the same colors. Manager doesn't want to copy paste that formatting and wants it setup as a Macro/VBA.
DATA EXAMPLE - [URL]
RELEVANT INFORMATION
Columns K-Q need conditional formattingColumn K - Formula pasted in only on lines that require the Sales Price to show, will return a number value or error
(=VLOOKUP(B38,'SaleWS'!C:G,5,0).Column L - Formula pasted in every cell in column except L38 is '=IF(Hxx="G",IF(Exx"Description EX",VLOOKUP($Dxx&$Gxx,'PriceWS'!$D:$F,3,0),""),"")'.
L38 has a sum of all above valuesColumn M - Formula pasted in every cell in column except M38 is '=IF(ISNUMBER(Lxx),Ixx*Lxx,"")'.
M38 has a sum of all above valuesColumn N - Formula pasted in every cell in column except N38 is '=IF(Exx="Description EX",VLOOKUP(Dxx,'Material'!A:O,15,0),"")'.
N38 has a sum of all above valuesColumn O - No formulas here, just manual entryColumn P - Formula pasted in every cell in column except P38 is '=IF(H38="P",VLOOKUP($Dxx&$Oxx,'PressWS'!$A:$L,12,0),"")'.
P38 has a sum of all above valuesColumn Q - Formula pasted in every cell in column except Q38 is '=IF(H37="W",VLOOKUP($Dxx,'WeldWS'!$A:$F,6,0),IF(Hxx="T",VLOOKUP($Dxx,'WeldWS'!$A:$F,6,0),""))'.
Q38 has a sum of all above values.Rows where they are using SUM for all the rows above for that part need to be blue
I would like to use this database list I export from another program to excel format. What I want to do is to change in the C column.
The value under Akt.saldo is how much of a given article we have in stock (saldo). And the Rest. in column B is the reservation, how much of that article thats is going to be shipped at that day. ex 14161 year(14) week(16) day(1).
So as you can see in column C the Rest. value never subtracts from the stock. What is want is something like that below.
Here is just selected all the values under stock and moved to the next column. Then used white color to hide it.
Here i subtract the hidden value with the reservation to be able to see how much is left after that order.
And the same here. Subtracting next order with the current stock.
How do i do this with a macro? The list is changing everyday.
is there a way to do this in VBA? I've also read: - Dave Hawley's recommendation of using: Sheet1.UsedRange.SpecialCells(xlCellTypeConstants).ClearContents
from another thread (which is excellent!)
- SHG's recommendation of using a named range, for example:
Range("Inputs").ClearContents
Given my limited knowledge of VBA, how would I now combine the two to write a VBA sub-routine that clears a named range entitled "Entry" on a sheet entitled "Data"? Would the following be the correct syntax: Worksheets("Data").Range("Entry").SpecialCells(xlCellTypeConstants).ClearContents
