I need a macro that will sum the values in column P from P8:?
The trick is that my # of rows will vary. I have the macro ending in the right spot.
So, if I have 90 rows of data my macro ends in P91. Now I need to be able to have it sum P8:P90. Like wise if I have 300 rows of data my active cell will be P301. I need P8:P300 summed.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I'll try my best to explain what I'm trying to do here using Excel macro (i've very limited knoledge in VBA ). I am working on a project where I'm using an actuator to measure micro-switches. The values are then extracted using HyperTerminal via RS232 and transferred to Excel to filter the values and display only the ones that are important.
Here is what I'd like to do via a Macro:
Compare cells in column A (e.g A1 and A2, A2 and A3, A3 and A4 etc.)
Example:
A
0
300
550
1200
1700
1900
2200
2000
1850
[Code]....
So first, if the values increase, do nothing and keep comparing other values. If we find the values decrease, display the larger value between the two, in this case it's the value 2200 that we want to display.
Next, the values will be decreasing progressively. We'll do the comparison between 2 values but this time if the values decrease, do nothing until we find a value increases. Display then the smaller value between the 2, here it's 1500.!
I've got workbooks containing various numbers of sheets that represent rooms with equipment in them.
The room number is always in cell B4. The data always starts in cell A8. I need to somehow copy the room number down column G starting at G8 and going down only as far as there is data in column A, which will vary for each sheet. I also need it do do this on all the sheets in the workbook.
I have NO marco skills, can anyone help start me off?
I'm trying to do here using Excel macro (i've very limited knoledge in VBA ). I am working on a project where I'm using an actuator to measure micro-switches. The values are then extracted using HyperTerminal via RS232 and transferred to Excel to filter the values and display only the ones that are important.
Here is what I'd like to do via a Macro:
Compare cells in column A (e.g A1 and A2, A2 and A3, A3 and A4 etc.)
Example:
A
0
300
550
1200
1700
1900
2200
2000
1850
1750
1600
1500
1950
2500
4000
So first, if the values increase, do nothing and keep comparing other values. If we find the values decrease, display the larger value between the two, in this case it's the value 2200 that we want to display.
Next, the values will be decreasing progressively. We'll do the comparison between 2 values but this time if the values decrease, do nothing until we find a value increases. Display then the smaller value between the 2, here it's 1500.
I am trying to write code that will run a macro based on values in a certain column. I do not know how many rows are present at the time the macro will be run.
For example, if Column A has the number 2 in every row then I want macro Z to run. However, if the values are not the same then I want macro Y to run.
In cell A1 I have a countdown timer from an external source that counts down to 00:00:00 approximately every 10 minutes and then resets.
I need a macro to be triggered whenever 00:00:00 is reached.
The macro will select column AL and copy a range of cells (within AL) that contain numeric values only and paste these numeric values in the adjacent cells in column AM. It is important that the paste is values only and not formatting or formulas.
Column is being fed dynamic data from an external source and displays either #N/A or numeric values.
I have a requirement where i need to check whether a value is entered in cells within a collumn and if so, it would set a default value to a cell on the same row but with a different collumn. this needs to occur on the run.
there are columns that i need to check and change the status column cell in accordance.
column client_name
clumn date
column start_time
column end_time
column status
first the macro is to check whether there is a client_name, if a value exist (example, smoth, doe, allen) it would set a default value to the status column on the same row as deviation (options are served, queued, deviation).
then it would check if the date & time columns have value and is less than current date time, it would change the status cell to queued.
i know that there are several nested checks (if then if then if then) the problem is that vba is not one of the languages that i master hence im totally lost here.
i can add the finalizing features and rollout the spreadsheet.
and one more thing. i have multiple sheets with the same layout where these checks and changes need to be performed
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View RelatedI have data in Column C that looks like this:
John
John
John
Ted
Ted
Ted
Gary
Gary
Is there a macro that can create workbooks based on this data. So, i'd have one workbook that would contain all the Johns and all the other data in Columns A -Z, then another workbook for Ted, and so on...
The number of workbooks I need is not fixed. It all depends on how many names are in column C.
I need a Macro that Copies all the duplicate values in a column (and their corresponding rows) over to a new spreadsheet.
For example,
1 A B C D E F G
1 Z X Y D R M T
2 B 5 7 8 9 0 4
Because 1 is a repeated value in the first column, the macro copies the first two rows over to a new spreadsheet.
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
[URL]
I have Column C and D filled with numeric temperature and humidity data. I need next 16 rows (8 more set) to be filled with randomly generated dummy data by the values exist in C and D. Same numbers but randomly distributed.
There should be a formula to extract the largest values and its corresponding values. For example, if column
Products Costs
A1 Pen 200
A2 Pencil 125
A3 Radio 670
A4 Apple 1500
A5 Xbox 222
A6 TV 100
The desired outcome
Products Cost
Apple 1500
Radio 670
Xbox 222
Pen 200
Pencil 125
TV 100
The second goal is extracting the top 3 largest values using a formula.
Sample file is attached for your convenience. Desired outcome is in GREEN.
Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
I have two columns in excel, col A and col B.What I would want to achieve is following:
Col A Col B
A 2
A 2
A 2
B 3
B 3
B 3
B 3
C 3
C 3
C 3
Now I want a total of values in column B pertaining to unique (or say 1st occurences) of values in Col A. So in this case the output should be 8 ,Achieved as follows(2 +3+3).
[URL]
Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I am trying to sum certain values in one column based on the values of another column. I made a few tables, generated some random numbers, and then I started writing up an if-then statement to see if I could get what I am trying to do to work. However, I was having difficulty getting the program to run, because I was declaring more than one variable (I think).
So for instance, I want cells in column G to sum forces in column C when a joint in column E matches a joint in column A. Similarly, I am trying to do the same thing for columns F and B.
I have attached a picture, which shows what I would like for the program to do automatically (rather than me doing it all manually)! I didn't include the code I wrote, because it was so minimal
Attachment 51660
Ccheck the attached sheet for the explanation.
Book1.xlsx
I'm currently working on a spreadsheet that contains 30,000 leads and their respective companies and i need to filter out any leads that work for companies present in a different list of companies (1,834 companies). Basically, i need to filter column A so that it only contains companies present in column B. Is there a way to do this using the advanced filter?
View 1 Replies View RelatedI have about 360 records in Column 1 and less columns in Column 2 (333 in this case). All the values in Column 2 are in Column 1. I need to be able to match those two columns up while keeping the data in Column 3 intact with it's corresponding value in Column 2. FYI I searched and found this thread: ttp://www.excelforum.com/excel-work...n-another.html
But my problem is that I have to tie in the values with column 3 to their corresponding values in column 2. In order to illustrate, I have attached an excel file in which I did the operation manually. (note: all values in column 2 are indeed in column 1 but not in the example as I have shown for the sake of convenience).
I have two DB extracts for 2012 and 2013 with customer id's that no not repeat across the year - columns A and B. I need to arrange this from:
2012
2013
270806
330011
330011
350529
350529
369916
to:
2012
2013
270806
0
330011
330011
350529
350529
0
369916
So the major idea is that the customers that are extinct in 2013 would appear as 0 in the Column B; customers that are the same would be aligned vs the previous year and new id's would appear on the separate row.
I have a workbook with 20 sheets in English Language, but I must to translate in Russian. Translating has done by human translator, so translation is good. I must change phrases and words in english to russian. I can use find/replace function but doing by hand it's very tie consuming. I need VBA or macro who takes values in column A, finds it in entire worksheet and changes it to matching value in column B. Is it possible and how I can do it?
View 1 Replies View RelatedI have a vba form with three comboboxes. The first combobox contains a list of employees, the 2nd a list of work activities and the third a list containing hours. As each employee enters the data for their name, activity and hours these values are saved to sheet6 starting at A10, B10 and C10. I want to be able to sum the hours for each employee who enters data. So the completed user form could look like the following:
HTML Employee (A) Activity (B) Hours (C)
Joe Swept 1.25
Raked 1
Bill Mowed 2
Cleaned 1
Joe Trimmed 1
So as you can see there could be a blank cell in column
"A" under Joe and Bill and Joe could come back later and
enter more info. What I want on sheet6 say starting at A30 the value
Joe would be entered and in B30 his total hours 3.25. In A31
Bill would be entered and in B31 his total hours 3 and so on for other
employees
If values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
Before and after examples are below....
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
Here's an example of what I need..
I want to
A B
2.5 corn
4 corn
7 green
2 green
I'd like a macro to find all corns, add up the column A for each corn and place the sum beside the last corn in column C
Then do the same with green, etc.
