I have multiple repeated rows that I want to make into combined cells. Here is what I have right now: Screen Shot 2014-03-04 at 3.51.37 PM.png
But what I want it to look like is: Screen Shot 2014-03-04 at 3.52.34 PM.png
I need to convert data from column IDS into separate rows, all other columns need to stay in tact. There are several distinct patterns for the IDS column, main identifiers are always starting with FILER or TEAL and the trailing numbers behind it have no more than 6 digits.
BEFORE MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911**/**FILER123188 ^** FILER877119*118
[Code] ........
AFTER MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911
[Code] ......
What the MACRO would look like? This is for Excel 2010.
I have a challenge where in have a list of about 4000 rows and each cell have mutiple lines. ( i know there is a thread about this but that did not address my issue).
So my data is as follows - (I have attached teh sample file)
"Pari bom - GP and CFO 02547895452 pari@gmail.com
papa bom - GP and CFO 23365789541 papa@gmail.com
mama bom - CFO 2587412589 pari@gmail.com
nana bom - CFO 2587412589 nana@gmail.com
masi bom - CFO 2587412589 masi@gmail.com
"
I want to be in a position to seperte each line in exclusive rows and then seperate teh name, number and the email ... the later eing easier but cant get my head around seperating the cells.
if there is a way to split multiple values in a cell to multiple rows. example check the attached sheet, macro/function with in excel etc.
View 2 Replies View RelatedI need a macro that will seperate multiple lines in more than one cell into multple rows.
Cells G-N contain multiple lines of data that I must split out into multiple rows; the multiple lines of data must be parced out into the same row.
I have a matrix with numbers that each cell is composed by a function of two parameters (two columns). The formula is
"=COUNTIFS(T2:T99,"15",V2:V99,"14")",
So it's counts when in one cell column I receive 15 and in the other 14. For instance, I receive the number 3 - so I have three rows that match (the first column with 15 and the second with 14).
I want, when I select the cell from the matrix (table) with the number 3 (that I receive from the formula) it will highlight the relevant rows..
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies View RelatedFormula or macro that can accomplish the following? In the original data, the text under 'A_Services' is contained within one cell. I want to break out the data as indicated in multiple rows, but only include the first 5 characters.
Orginal Data
appt_number
date
length
A_ICOMS_WO_TYPE
A_TOTALPOINTS
A_SERVICE_CODE
A_SERVICES
[Code]...
I have a datasheet that has more than 80,000 rows, Current format is:
Coulmn A - Column B
prod1 - <option selected>abc</option><option>def</option><option>ghi</option>
I want it converted into:
Coulmn A - Column B
prod1 - selected
prod1 - abc
prod1 - def
prod1 - ghi
I need to separate multiple values separated by comma in a single cell into individual rows. However, I also need that the data in the adjacent columns of the original cell also to be repeated in the new rows. The problem is illustrated in the attached file.
that the table is just a sample and most of the tables I work with contain at least 15,000 rows,
I have some data from web-site, when I copy paste these data to Excel is only in 1 cell and i would like to split it into multiple rows by comma.
View 4 Replies View RelatedFaced with a problem. I have steps for doing testing in one cell but I need to put them in multiple rows.
Example ....
I was just not able to figure out how to write a macro for splitting the cell data into multiple rows with the other column values being duplicated. Just elaborating my problem, its like i have a column in which i have multiple values separted by a comma, So i need to divide all these values on basis of a comma and then copy this value to a new row below, along with the previous column values same for this new row. in my file cost center column is to be worked upon. Can this be done by a macro ?
View 5 Replies View RelatedI am looking for VBA code that will add the character ")" to the first blank cell in each row. The amount of columns in each row changes and the amount of rows change. I attached a sample spreadsheet.
View 2 Replies View RelatedI'm sure there is an easier way than copying and pasting each individual cell from one spreadsheet to another. Is there a way I can define a batch of cells (city, state, phone #) and copy them into the other spreadsheet so I don't have to do each cell individually?
Here is a picture to show what exactly I am trying to do.
SS.PNG
Also, the cells that belong in the same column and row on one spreadsheet are equal distance from each other throughout the other spreadsheet that has all the info in 1 column.
I am trying to add insert rows using macro.
L column fills with numbers. if L1 value is 5 then below need to insert 5 rows.
I tried below Macro.
But it getting Error.
Sub InsertRowswork1()
Dim LastNumber As Long: LastNumber = ActiveSheet.Range("L" & Rows.Count).End(xlUp).Row
While LastNumber >= 2
If Not IsEmpty(ActiveSheet.Range("L" & LastNumber)) Then
[Code] .....
I have a worksheet that contains 15 instances of a repeated table over 700 rows. Each table is 45 rows in size and is housed in between the natural page breaks in the spreadsheet.
These tables are populated from data form another worksheet but may not all be used (8 out of the 15 may be used but will always start from table 1 and there will be no missed tables).
In the very top right of the table is a cell value that is only displayed if the table is in use, so will be blank if not used.
Code that will hide multiple rows (45) based on a cell value being blank.
I'm attempting to match a name with the row and column numbers of data that is laid out in a grid format. It looks something like this:
Denson
Matthews
Smith
[Code]....
This works just fine, except for the fact that once in awhile the same name will appear in the grid twice, and the row and column returned will be off (it will return the row for one of the Smiths, for example, and the column for the other).
I know why this is occurring so I'm looking for a better way to do this. The good part is that I don't necessarily need both locations returned for each "Smith" ; I just need the correct row and column for at least one of the instances. I'm looking for a better way to do this.
The workbook has multiple sheets, and a cover sheet. Each project has a sheet and the status, costs, updates ect. are updated to the cover sheet.
Problem:
What happens is there is a cell which has conditional formatting on it, e.g. If text is Green then colour cell green, if cell text is amber then colour amber and if cell text is Red then colour Red. This works fine.
If the cell text is green then I need a number of rows hidden, if it is amber or red then show the rows.
I have found the following
Sub
If Target.Value = 1 Then
Rows(Target.Row).RowHeight=0
Else
End If
End Sub
Which I have changed to:
Sub
If F4.Value = Green Then
Rows("5,6,7,8,9,10.Row).RowHeight=0
Else
End If
End Sub
So this does not work, need to know why and how to make this work for each sheet I am on e.g. ActiveWorksheet?
I have a workbook with a single worksheet that has about 2000 rows, columns A, B, C, D, E & F
Cells in colums A, B, C, E & F all have very different information in them, nothing is similar in any of those columns that I can base a criteria on. Cells in column D however will have 1 of about 18 possibilities in them
What I want to do is have another workbook with 18 worksheets, each worksheet named 1 of the 18 possibilities, and somehow magically pull the data from the first workbook and insert it into the correct worksheet in the second workbook, leaving the data in the first workbook intact.
I update the first workbook several times a day, adding and deleting from it so would need to update as it goes, or be able to run the update as and when needed.
My skills are limited to simple formulas inserted into cells and dragging them down!
I have a situation where I have source data formatted like this:
Document ID
Document Name
Author
[Code]....
What I would like to do is to get each author on a separate row. I am able to do that using Text to Columns using the carriage return and then doing a transpose. I've also seen some threads where VBA is used to accomplish similar. However where I am stuck at is getting everything else to drop down accordingly. I.e. with the data set above I'd like to get to:
Document ID
Document Name
Author
[Code]....
I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
I am trying to find code that will allow me to hide a set number of rows based on the value of a specific cell which I need to work for two worksheets in the same workbook. Is that even possible?
For example: when i enter 5 into cell D1, I need five rows to be visible on both sheets.
I want to split the contents of a single cell(ALT Enter as delimiter) into multiple cells and retain the values in column B.
Ex:
A1: apple
banana
car
house
A2: yellow
B2: building
x
y
B3: O
Output:
sheet 2:
A1: apple B1: yellow
A2: banana B2: yellow
A3: car B3: yellow
A4: house B4: yellow
A5: building B5: O
A6: x B6: O
A7 B7: O
I have a string of text in one cell on Sheet 1 (ie., A1, Sheet 1), here is a excerpt:
A-dec International Inc., A. Bellotti, A. DEPPELER S.A., etc ...
What I need to do is split the cell into separate rows, using the comma as a delimiter. I will be reading the cell from another sheet and need a formula that will provide me with
A1: A-dec International Inc.
A2: A. Bellotti
A3: A. DEPPELER S.A.
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
how to shift data in a column down multiple rows while in an IF statement. I am assuming you cannot just simply repeat the insert cell formula.
Here is my code - it's ugly but it was working when I just needed it to move down one cell:
lastrow = Range("A2").End(xlDown).Row
For i = 2 To lastrow
Range("B" & i).Select
If Range("B" & i).Value = Range("B" & i).Offset(-1, 1).Value Then
[Code].....
I want to to copy selected columns of sales data into rows organized by salesperson. I have just started out with VBA and find that I cannot do it myself.
My original data are in the form of the following:
invoice_no
product
sales
qty
total
[Code] .....
I want to display the data in another sheet in the following format:
sales_a
sales_b
sales_c
sales_d
[Code] ...........
I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.
I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.
I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.