In my userform 'Options' the user selects a date from the combobox2 list
I then want to use this selected date from combobox2 to carry out a autofilter through cells B5:B5000 in the 'database' sheet.
EG
if the user selects 23 OCT 2009 from the list (combobox2 in userform Options)
the filter for 23 OCT 2009 is applied for all the data stoted through cells B5:B5000 in the database sheet
I'm trying to use Advanced Filter to generate all the unique values within a list, only at times I want to Autofilter the data, then use the advanced filter to determine all the values of the slimmed list. For some reason, this works fine on column A, only returning the values that begin with a 1 when the column is filtered for all values beginning with 1. However, when I run the advanced filter on column 2 with column 1 filtered to all beginning with 1, all values all returned regardless of whether column 1 criteria is met. Either way, after the advanced filter, the autofilter has been removed.
View 7 Replies View RelatedI have 3 sets of table in a sheet, namely, BK,DC & BDM. Each of the table to shows the result (extracted from other sheets) for 12months and the rating that correspondence with the result. There is also 2 combobox and a commandbutton at the bottom of the sheet. The combobox1 is to select the item (BK,DC or BDM) and combobox2 is to select the month. This is because i need to create something whereby, once the item and month is selected, then the user is able to click on the commandbutton and a small window will appear to indicate the year to date result (extracted from the tables)
For example, if the user select BK in combobox1 and April in combobox2, then when they click on the commandbutton, the following happens: -
1. Calculate the average percentage of the performance from Jan - Apr (I'm using the Excel formula for step 1 & 2)
2. Generate Rating
3. Populate the result in a small pop-up window which has the header as per what is selected in combobox1.
This is what I'm trying to achieve: Display a list box (or any other appropriate form/active X control) to get input from the users which is usually a list of several terms. Once they've input the list, upon clicking 'OK' it should add them all to Col. B.
The above request WILL be a good solution, but if there is an advanced solution to this for eg., something like a list box with buttons, for instance: click on 'Articles' and it populates 'a,' 'an,' & 'the, click on 'Prepositions' and it populates all the pre-fed prepositions, etc. that would be PERFECT!
I have a problem very similar to this thread: [URL] .... Therefore I have tried to adapt but so far failed.
My requirement is that a userform pops up with multiple comboboxes (in this scenario 3) and once the results have been selected and the user clicks the button "OK" then the autofilter changes to the same as what the selected ComboBoxes were.
So, there are 3 comboboxes so I have tried the following:
VB:
[PrivateSub CommandButton1_Click()
Worksheets("Data").Activate
If Sheets("Data").AutoFilterMode = True Then Range("B3", Range("B600").End(xlUp)).AutoFilter
Range("B3", Range("B600").End(xlUp)).AutoFilter Field:=1, Criteria1:=ComboBox1.Value, visibledropdown:=False
[Code] .....
Is there by any chance a work around for using a multiple auto filters on one worksheet using combo boxes ? An exmple of dummy data is :
Sales Rep<-filter here
Paul500
John600
Tom900
Andy450
Mark300
Sales by Region<-and here
North120
South360
East480
West490
North East250
North West500
South West290
South East260
I have found codes to do this however not one to show if I have varied selections. I have 3 combobox's and 2 textbox's to autofilter data on the same page. can someone tell me where I am going wrong in my code.
Private Sub CommandButton1_Click()
With ActiveSheet
.AutoFilterMode = False
If Me.ComboBox1.Value = True Then
With . Range("B2:S2")
.AutoFilter
.AutoFilter Field:=2, Criteria1:=Me.ComboBox1.Value
End With
End If
If Me.ComboBox2.Value = True Then
With .Range("B2:S2")
.AutoFilter
.AutoFilter Field:=4, Criteria1:=Me.ComboBox2.Value
End With
End If........................
I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.
Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.
I want to force a user to select a value from a Combobox that I set up in a newly created worksheet from inside a macro - while the macro is still running. I have the code to create a new worksheet, size it accordingly, add a Combobox control, assign a range of values for the drop-down list, but do not know how to suspend the macro and force the user to make a selection from this Combobox before continuing. Not even sure if this can be done.
View 4 Replies View RelatedI have a simple user form that has a combobox and 5 textboxes.
The combobox gets its row source from all the data in column A of the worksheet and the 5 textboxes will have decimal number inputted.
when commandbutton 1 is clicked I would like exel to find the value in the combobox on the worksheet and input the 5 textboxes in colums B-F. I'm sure it has something to do with "offset", but I can't quite figure it out.
how to write VBA to stop user typing in a combobox but only choose from the dropdown list?
SO that to avoice any device I/O error.
Right now I am constructing a macro so that upon exection, the user will be forced to select one of the dropdown menu options which are listed in a dynamic array. The dropdown menu should be in a popup of somekind created by the macro and not on any of the worksheets or charts. I would like to then assign the choice that the user makes to a variant. I have searched the web but not found what I am looking for and was hoping that someone could give me some phydocode that I can look at.
The restrictions that I am operating by do not allow me to place a combobox upon any of the worksheets which is what I find in all the examples posted online.
I have a logon screen and would like to fill a combobox dependent on which user logon.
If User1 logon - options 1,2,4 must be in dropdown list
if User2 logon - options 2,5,6, must be in dropdown list, etc....
I have been able to create a userform that allows users to fill out a form without the need to navigate throught the excel spreadsheet form that has been created. to further refine this I am trying to use either a list box or Combobox to display specific items for certain cells, ie Travel Method (Air / Rail / Other), or Department (Projects / Finance / Engineering / Admin etc). I can create these in a spreadsheet without to much problem, but sofar have been unable to get them to work in the user form.
View 2 Replies View RelatedI have searched the forum but can't find an answer to my problem. I have a list of about 3000 streets, a sample of which follows:
ARBROATH ST
ARCOLA ST
ARGO PL
ARIES PL
ARMSTRONG AVE
ARTHUR AVE
ARVIN CT
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE...................
I know how to populate a List Box, but rather than having to scroll through the entire lot I would like to just have to type in a few letters and the output only display streets that start with only those letters. For example, if I type in AS only the following appear in the listbox.
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE........................
I wanted to create a userform with multipage. On the first page I want to use a ComboBox that would allow the user to select the customer. The customer name is on the sheet that I named "Customer" which also contains the street address/city/state/zip. What I would like is, once a customer is selected, I want a textbox that will be populated with the correct address taken from the sheet named "customer".
On the second page I'd like to use it for Product Info. I want to have a ComboBox, Text Box, a Command Buttons. The ComboBox is to select the "Model#" from the sheet named Product Info" and the TextBox is for the user to write their comments. One of the Command Button is to be view a sheet named "Quote" and the other is to send the "Quote" through email.
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies View RelatedIm sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies View RelatedI can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View Relatedtry and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies View RelatedI have an excel file with multiple sheets. I want my HR team to update that file, but one user shouldnt see the entries of other users. I want to make a consolidated file out of three files. This excel template is for salary input.
View 3 Replies View RelatedI have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)