Using Indirect Formula To Pull In Data From Different Worksheet
Jul 7, 2014
I am trying to use the indirect formula to pull in data from a cell in a different worksheet using the tab name as my reference. For example:
I have my tab name in cell A2, then I am using this formula to pull the information from cell g29 on the tab listed in A2, but its not working:
=INDIRECT(A2&”!”&”g29″)
Also, my tab name in cell a2 is a date, does that make any difference? I've tried a couple variations on the indirect formula and have gone from the #REF! error to the #NAME? error.
View 2 Replies
ADVERTISEMENT
Jan 16, 2014
I have a competition entry form for an association I belong to that I'd like to add two drop down menus to so that entrants can select their club name and associated team names for that club.
In a worksheet behind the form I have a list of clubs in column "B" ("A" has the ID number in it as the table is from Access - don't ask!!) and the names of teams associated with that club going across the sheet beside the club name in individual Name Ranges. (Up to 30 Team names in Dynamic lists
=OFFSET(TeamsTest!$C$2,0,0,COUNTA(TeamsTest!$C$3+TeamsTest!$C$3:$AZ$3),1) )
On the form I have managed to make the first drop down so the club can select its name from a list by using Data Validation and referring to the Range Name (ClubLink - =OFFSET(TeamsTest!$B$2,0,0,COUNTA(TeamsTest!$B$2:$B$200),1)).
I have tried using an INDIRECT command to create a second drop down which will display only the team names associated with the Club selected in the first drop down, but can't get it to do anything - no drop down appears when you click on the drop down arrow at the side of the cell
The data Validation for the Team Name drop down is =INDIRECT(SUBSTITUTE($C$12," ","")) where C12 is the Club Name cell.
Why I can't get the Team Name cell to show the names listed beside the Club selected in C12?
View 14 Replies
View Related
Aug 26, 2009
I am trying to do season stats for my roller derby league. I have a great spreadsheet going but the one thing I want to do, I can't seem to do. I am attaching a "test" file. very simple and small but shows what I need to do.
I have different sections and I am trying to pull the highest number out of that section. For this example, it is under the green Jams Skated: Jams at Jammer. The number on the right is the highest number of jams skated while the number on the left should be the name of the skater who has this number. Okay, no problems there. My problem occurs when I try to move these same formulas to another sheet. in this case, sheet 2. It pulls all kinds of strange things.
View 4 Replies
View Related
Sep 28, 2011
determining the correct formula to lookup various details from multiple worksheet:
Data as follows:
Sheet1: input
AB1MonthSales2AUG55003MAY4000
Sheet2: Data
AB1MonthSales2JAN20003FEB25004MAR30005APR35006MAY40007JUN45008JUL50009AUG550010SEP600011OCT650012NOV700013DEC7500
b2,b3 Formula = Indirect(Address(match(a2,????,0),1,1,1,"Data"))
i dont know what is the correct range inside the match fuction to identiy the row number inside the Data sheet, i think the solution would be match(a2,Data!a2:a13,0) but things might get complicated if you have multiple worksheet such as sheet2: Data , sheet3: Data2, sheet3: Data 3
and each table has unsorted details compared to others sheets (Data vs Data 2)
View 9 Replies
View Related
Mar 11, 2009
The spreadsheet will be have 3 worksheets. The first worksheet will be the mastersheet (Form-01 in the attachment) that will be used as a summary/receipt for the person participating in the auction. The second worksheet will be a list of the people participating in the auction (Names) will all applicable contact info. The third worksheet will be the list of all the items for the auction (Auction Items) with all relevant information per item and a unique number for each item.
The idea is to be able to track information during the auction on the "Auction Items" worksheet, there is a column for the bidder ID of the winning bidder. Then after the auction is over and its time to settle up be able to go to the master sheet (Form-01) and enter the Bidder ID# and have the other fields auto-populate.
View 5 Replies
View Related
May 5, 2009
I am trying to pull data from one worksheet to another. I am using Product ID numbers. The problem I am having is that not every Product ID I am searching has a partner on the second list, so I get an #N/A. In stead of #N/A I just want a "0".
my vlookup looks like this: =IF(VLOOKUP(A1,Sheet2!A5:C500,3)>0,VLOOKUP(A1,Sheet2!A5:C500,3),"0"). If A1 does not find a match on Sheet2, it returns "#N/A" when I want it to return "0".
View 5 Replies
View Related
Feb 27, 2014
I have a workbook, in which I will have approximately 5 worksheets. The 1st worksheet will be a summary table, which will pull data from the other 4 worksheets. These 4 sheets have data of 4 companies, thus representing 4 companies. In the 1st worksheet, I have a drop-down list that has selections for each company.
How do I make it so that when I change the selection from A company to B company, the data in the summary table will automatically pull data from corresponding worksheet? For example, if 2nd worksheet represents Apple Inc, the 3rd represents Microsoft, how do I reference from 2nd to 3rd worksheet automatically when I change my selection from Apple Inc to Microsoft in the 1st summary table sheet?
View 3 Replies
View Related
Aug 7, 2014
I am having a problem pulling out individual data from previous worksheet (Sheet 1) to another worksheet(sheet 2, 3, 4...) individually.
For example I want to pull out the values of IP B0b/C0b Hum to another worksheet separated by each day. is there an easy way to to this using a vba code or excel formulas?
Please find attached file.
View 2 Replies
View Related
Oct 6, 2008
I've been using the DSUM function to pull in data from another worksheet.
In brief, the problem is that when I Cut & Paste the formula from C7 to C8, I want the Column reference to change but not the Row reference.
If I copy across the Columns then the result is OK e.g. The Formula will change from
#=DSUM([HBAP_SHUTDOWNS_2008.xls]NWM_SuccessfulShutdownsByDepartment!$A$4:$E$2924,"Total",'Calculations Page'!A$17:A$18)#
To
#=DSUM([HBAP_SHUTDOWNS_2008.xls]NWM_SuccessfulShutdownsByDepartment!$A$4:$E$2924,"Total",'Calculations Page'!B$17:B$18)#.........................
View 4 Replies
View Related
Nov 10, 2011
I need some VBA code that puts in formulas to pull data in various columns within row 2 of another worksheet.
The formulas need to be entered below some other data, which is populated from another prior macro.
The below code works well but as the prior macro can populate a different number of rows on different days, the Row count then also changes and doesn't always refer to row 2 of 'HLDRT before' tab.
ActiveCell.FormulaR1C1 = _
"=IF('HLDRT before'!R[-22]C[-18] = ""A17"",RIGHT('HLDRT before'!R-20C[14],3)&'HLDRT before'!R-20C[9]&'HLDRT before'!R-20]C[-13],"""")"
Is there a way I can tell the above code to always use row 2 from the 'HLDRT before' sheet, while keeping the column number lookups the same?
I think there is a way to do it by removing the [] signs but I can't get it to work. I also then need the macro to copy these down so I'm not sure if using $ will cause problems?
View 4 Replies
View Related
Nov 8, 2006
I have 2 worksheets (Sheet1 and Sheet2). Sheet 1 contains around 3000 records with multiple fields (columns). Column A contains the ID number. Sheet 2 contains some records with different fields except for the ID number which is common.
I need a macro to retrieve information from sheet1 and copy it to sheet 2 based on the ID Number; i.e the macro needs to get the ID number from sheet2, locate it in sheet1 and copy the data from column D in sheet1 for that particular record and paste it in sheet2.
View 7 Replies
View Related
Feb 21, 2014
I am trying to create a document that runs a scenario based on the two drop down choices selected that determines which worksheet in the workbook autopopulates over to sheet one based on the selection. I tried doing an if statement but did not have any luck.
View 1 Replies
View Related
Jan 17, 2014
I am trying to pull a specific time frame of data from worksheet, in a large file, into another active workbook. A fiscal month. I don't know how to at all. I figure it should be a And IF and Vlookup but do not know how to execute it all.
View 1 Replies
View Related
Feb 3, 2006
How can I pull data from a specific cell from a closed worksheet in VBA?
Not sure but I think that Workbook("wb1.xls").Worksheet("Sheet1").Range("A2") only works if the worksheet is open.
View 9 Replies
View Related
Mar 6, 2014
My query is;
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
View 4 Replies
View Related
Jun 17, 2009
I have a data table that contains begin dates, end dates, and colors. The data is input starting with the earliest begin date. On a second worksheet, I have a listing of the years starting with the year of the first begin date and ending with the end of this year. I need to be able to pull any color choices associated with a year from the data table on the first worksheet. Some years may not be specifically listed in the data sheet as the person could have had the same color choice for several years. Sometimes a person could have more than one color choice in a year.
I am at a loss for how to get to the data I need. I created an example spreadsheet to demonstrate the data I am working with, and an example of what I need my results to look like in the end.
View 5 Replies
View Related
Jul 20, 2012
I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.
Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.
I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....
View 1 Replies
View Related
Apr 23, 2014
I am trying to have my spreadsheet pull data from one tab and cell if they match another.
Tab "Ag Orders" column H, I enter data in lets say cell H37. Whatever I enter, if it matches tab "reference List" C:C, then "ag orders" column G (specifically G37) should enter the data in "reference List" D:D
So since in H37 I entered 34000 - 314620, G37 should pull in Farm Operations since on the referene list tab that string of numbers (C11 matches up with D11)
a little confusing but I hope it makes sense.
13-14 budget-AG.xlsm
This isn't the exact formula I used but something like it and it wasn't working. It wouldn't match the data up correctly on a few of the department names
=IFERROR(LOOKUP(H35,("11000 - 311010","11000 - 311020","11000 - 311510","11000 - 311610","11000 - 312010","17800 - 311010","17800 - 311510","17800 - 312010","34000 - 314610","34000 - 314620","34000 - 314640","34000 - 314660","34000 - 314680","34000 - 314690","81008 - 840008","81009 - 840009","13863 - 312040","13864 - 312050","71060 - 521620"),
[Code] ..........
View 1 Replies
View Related
Jun 14, 2014
Looking for formula to extract data from the raw data table list to a new table list when an option is selected from the dropdown list.
Sample data attached and desired outcome in green color.
Outcome
Product 3
ProductTargetOff TargetTarget Range
January364980
February135732
March162167
April
May
June
July
August
September
October
November
December
View 3 Replies
View Related
Jan 16, 2014
I have Excel 2003
My spreadsheet has multiple lines of data for multiple items (have a specific item #) and I need to be able to enter an item # on a different sheet so that the requested information can be pulled from the data source. The items have information on multiple rows. I need to have all of the rows pulled into my output file when I specify the specific item. #.
I have attached a spreadsheet showing the type of data is contained and what my desired output would look like.
View 1 Replies
View Related
Nov 18, 2011
I have three columns of data laid out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # Shipment Reference Field
12345 1ZX123 xxOO12346
12346 1ZC345 KJH12347--45
12347 1Z7YYT 0000012345XXX
I'm trying to write a formula for column A that essentially looks at the field in column B, finds the instance of the data anywhere in the entirety of Column D, and when it locates it puts the corresponding field from Column C of that line in the results of column A. So the result above would turn out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # ShipmentReferenceField
1Z7YYT 12345 1ZX123 xxOO12346
1ZX123 12346 1ZC345 KJH12347--45
1ZC345 12347 1Z7YYT 0000012345XXX
I have the origins of a formula here...but I don't know how to put in the part where i'm retrieving the data from Column C of the same line as the target data.
=INDEX($D$1:$D$100, MATCH(B1,1*LEFT($D$1:$D$100,LEN(B1)),0))
View 2 Replies
View Related
May 16, 2014
if there was a way to automatically add each student to a class list as their information is inputted. What i mean is, after input Sally Student in the main enrollment list she would automatically go to the class list for the class she has chosen.
I have attached a sample workbook with my desired results. Basically what i want to do is make this easier for those in charge to get the class lists from the main list without having to copy and past all the time.
The class lists are in the tabs in the workbook.
View 5 Replies
View Related
Oct 9, 2008
=SUM(INDIRECT("'Sheet2'!$C$1:$C$5"),INDIRECT("'Sheet3'!$C$1:$C$5"))
These do not:
=SUM(INDIRECT({"'Sheet2'!$C$1:$C$5";"'Sheet3'!$C$1:$C$5"}))
=SUM(INDIRECT("'"&Sheets&"'!$C$1:$C$5"))
Where Sheets refers to =Sheet1!$A$1:$A$2
[A1=]Sheet1, [A2=]Sheet2
For the last two ONLY Sheet2 is summed, not sheet3
View 5 Replies
View Related
Oct 15, 2013
I am trying to use the sumif and indirect function together but I keep getting an error and I'm not sure why.
Actual formula:
=SUMIF('SWG OR'!B:B,A168,'SWG OR'!E:E)
Using the sumif/indirect function, I have the following:
> Cell B5 contains the name of the tab "SWG OR"
=sumif(indirect(B5&"!B:B",A168,B5&"!E:E"))
View 2 Replies
View Related
Feb 22, 2010
I have a worksheet with a name that inckudes a hyphen, e.g. 1234-5678.
And I have the worksheet name in a cell, say, I!.
Using
=INDIRECT(I$1&"!YADDA")
I get a REF error because of the inclusion of the hyphen in the worksheet name.
How can I fix this without eliminating the hyphen?
View 9 Replies
View Related
Feb 9, 2012
A post about skipping rows is very similar to my situation, but I'm stuck on how to translate that for columns. (Filling formulas but need to skip cells)
I'd like to transfer information from a worksheet called "Raw Data" to another sheet, skipping every 5th column. I'd like to go from "Raw Data" B12 to a new sheet C6, then from "Raw Data" G12 to D6 in the new sheet, and so forth.
I figured out that I'll need to use COLUMN()*5-13 as a component of the function, but I can't seem to figure out how to format the name of the worksheet correctly, with the ampersand and quotation marks.
This doesn't work at all, but I think it's in the ballpark...
=INDIRECT("Raw Data!"(COLUMN()*5)-13)&12)
View 3 Replies
View Related
Jan 24, 2012
Trying to use INDIRECT to sum the contents of a column on another worksheet upto a certain cell reference which is in another cell on the worksheet.
=SUM(INDIRECT("Sheet1!A4:Sheet1!"&B1))
I have taken it back to simply having sheet1 with numbers in A4 to A23, then sheet2 with A23 in cell B1, and the formula above it C9, but I keep getting #REF!.
The formula works fine if on sheet1 without the worksheet names in it. Formula evaluation gets to =SUM(INDIRECT("Sheet1!A4:Sheet1!A23")) then gives =SUM(#REF!)
View 6 Replies
View Related
Jun 11, 2008
I am familiar with the use of the INDIRECT function to retrieve data from different sheets in a workbook. However, is there a simple way of obtaining a list of all sheet names in a workbook (I have about 50) rather than typing them into the sheet individually?
I can see them in the workbook properties but can't copy and paste them.
View 9 Replies
View Related
Aug 18, 2009
I am trying to develop an Indirect Indirect Validation drop down list. Example, Building - Floor - Room, i.e. Select Building from a Validation drop down list. Then based upon the Building selected, select only the Floors applicable to the Building Selected. I am able to achieve this via an Indirect Validation drop down. However, when I attempt to then select the Rooms applicable to the Floor of the Building I selected, I can not produce an Indirect Validation off a previous Indirect Validation.
In the attachment, I have used Plant - Location - Room. I have name ranged the selections, and have used Validations Lists for Plant, and Indirect Validations for Location. The error occurs where I attempt to do an Indirect Validation for Room.
View 3 Replies
View Related
Jul 31, 2006
I have two worksheets. The first is a master listing of all stores for a
certain client. They are all assigned a store number. The second sheet is a
list of all invoices, I need to be able to type in the store number and it
pull up the street address, city, state and zip, all in different columns.
View 11 Replies
View Related
