Splitting A Table Into Two Tables?

Oct 28, 2013

I have a table of two columns, but I want them to be two separate but adjacent tables.

View 2 Replies


ADVERTISEMENT

Stop Row From Splitting On 2 Pages When Printing Pivot Table

Jun 19, 2014

Is there a way to tell a row in a pivot table to keep together when printing? Example if I have a row for Item and then a row for year after that, I want all the years for that item to print together on the same page.

Item1
2010
2011
2012
<page ends>
<second page>
2013
2014
Item2
2010
2011
2012
2013
2014

View 1 Replies View Related

Splitting Large Table Into Separate Worksheets Keeping Format Same

Apr 26, 2013

I have 2 large XLS sheets that need to be split into seperate sheets.

The first is only 5 columns wide but the amount of rows changes day to day.

The second is a maximum of 7 columns wide and again the amount of rows will change.

I'm hoping for a VBA code to be able to do both on seperate books.

The A Column has the name of the company, and this can include (/,&) that will need to be removed, the names can also exceed 31 characters.
I would like to seperate the sheets by the company name and have the name appear as the sheet name.

Also the formatting from the master sheet to be copied to the resulting sheets, with a header row.

I have included the data for the larger of the two workbooks. data.jpg I have to pull the smaller report each day and the larger report each week.

View 3 Replies View Related

Preserve Format Of Table When Splitting Master Into Separate Tabs

May 27, 2014

I have a macro that enables me to split my master table into separate tabs based on the first column. However, the column widths and the header format is not retained. Is there something I can add to the macro below to keep the formatting?

Code:
Sub DispatchTimeSeriesToSheets() Dim ws As Worksheet
Set ws = Sheets("MasterList")
Dim LastRow As Long

LastRow = Range("A" & ws.Rows.Count).End(xlUp).Row

[Code] ......

View 4 Replies View Related

Table Presentation: Diagonal Line Splitting Two Values In One Column

Mar 4, 2007

I have a table with data representing $income vs %Debt burden respectively. The data on the table per respective intersection provides number of accounts and total ($)value of accounts. I have tried to combine the two pieces of information into one column and have a diagonal line separating the two numbers. (sample table attached).

View 2 Replies View Related

Append Multiple Tables Into One Table

Nov 27, 2012

I have a workbook that contains mutiple tables in multiple sheets that are all in the same columns in each sheet but contain various rows. Data may not be entered in every single row within each table. I'm trying to create a master list of all data from all of these tables on a single sheet so I can analyze the information in total. I don't want to show any blank rows on the master file where data is not entered in each table. I've tried using the consolidate function within Excel but am not looking to perform a function (i.e Sum, count). I've also tried a pivot table from multiple consolidation ranges (Alt + D + P) but do not like the limited functionality of the pivot table. I do not have much experience with VBA but am assuming this may need to be done using code.

Attached is a sample workbook with named ranges of each table. Example.xlsx

View 9 Replies View Related

Tables Feeding Data Into Further Table

Jan 10, 2013

I need to put together a number of worksheets, each worksheet is to record project information that's happening at our production sites and all the tables are uniform in design. There also needs to be one 'master sheet' in which all the information added on the lower sheets is automatically added.

So basically I need to have four tables on separate sheets that feed information in to one table on a further sheet.

View 13 Replies View Related

Creating Table From Data From Several Other Tables

Jan 10, 2014

My family owns a Fast Casual Middle Eastern/ Mediterranean Restaurant. I'm taking charge of making it as profitable as can be! Our plates are different combinations of kebabs, rice, Falafels, Gyros, salad, platters. So theirs tons of combinations.

I am Dead serious about knowing REAL plate costs:

I spent days entering price data, weighing meat, produce, calculating usable yields. I then built "component builders" using data validation drop-downs, and Index + Match functions to construct the costs of the recipe items,standard base items and side items. So I now know How much a skewer of Marinated Kebab Costs me, and all the Components that go into building a plate.

I've now built a "Plate Builder" (See Pic) to create the EVERY combination available at our restaurant. So when I'm done filling in all the builders, I'll have a whole lot of tables. I'd like to pull the name and plate cost from each table and create a big table organized by whether its eat in or take out. How do I do it.

TL;DR: Need to create a table that pulls data from several other tables....

View 2 Replies View Related

Combine Tables From Different Worksheets In One Table

Jul 18, 2012

I have an excel workbook with 11 different worksheets. Each worksheet represents a project my company is working on. And in each worksheet there is exactly the same table, just with different data).

Now we would like to get an overview of all these different data put together in one 'summarizing' table on a new worksheet (number 12).

-Is it possible make such a table without having to copy past all the time?
-The data in the tables may change over time, so it would be good if that 'summarizing' table automatically adapts to the other ones.

View 9 Replies View Related

Create Summary Table From 2 Tables

Apr 15, 2008

I have 2 worksheets which have a table on each. I would like to create a list using data from both tables. The list I am looking to create is for an upload fom an excel planning sheet into an ERP system and requires certain data fields and a certain format. Both table have the same amount of fields and the dates across the top. On worksheet one there are material numbers on the left and dates across the top. In the list I require I would need the dates down the left in the first column, next the material number, next the quantity from table one and then the last column I would require the value from the second worksheet which is relevant to the material number and date from the first table. I have tried pivot tables but cannot get this to work and feel it may work with a lookup. I have attached an example of the data.

View 2 Replies View Related

How To Merge Multiple Tables Into One Large Table

Dec 6, 2012

I'm having an issue where I want to merge lots of tables held in different spreadsheets into one large table so that I can use it in a pivot table. The attached spreadsheet demonstrates what I mean:

So there are 3 different accounts held in the first 3 tabs. These all have the same columns and format. I want to merge these automatically into the table that is in tab 4 so that I can use the pivot table also demonstrated in this tab.

What I want to happen is when I add rows to the tables in the first 3 tabs, these are automatically populated onto the 'overall' table in the 4th tab. (I'm aware I could do this manually, but for what I'm using this for these will be dozens of tables with hundreds of rows updated monthly).

Is this possible? Basically it doesn't matter how it's done, as long as i can show the information held in the pivot table each month end.

View 3 Replies View Related

Extracting Out Of Multiple Tables Onto One Summary Table

Jun 3, 2014

I would like to summarize information from multiple tables (across multiple worksheets) into one table using a formula.

I have Attached an example: Book6.xlsx‎

The 'option plan 1' tab shows multiple summary tables for different types of clothing. (the type of clothing is text in the top left hand side of each table just under the month i.e. "jersey tops"). This tab is an example of 6 similar tabs that come from 6 different workbooks...

For each clothing type (i.e., Jersey Tops) I would like to extract the TTL OPTIONS no. and the TTL UNITS no. for each store and show these on the table in the "front Sheet". against the clothing type.

Is there a formula that can match the Clothing type from column A in Option plan 1 tab with Column C in the the front sheet tab and subsequently Match up the TTl Units and Options for each store on the front sheet tab.

I have manually keyed in what I would like the formula to show for 'jersey tops' on the Front sheet tab.

View 5 Replies View Related

Identifying Small Tables In One Large Table

Mar 23, 2009

I have a data dump, on this single excel sheet their are a large number of tables, up to 100 in all, and what i need to do is extract key figures to form a summary table which i then produce stats for.

What i need is a macro or code that will automatically scan the tables, retrieve the key figures and return them in my summary table.

Attached is an example, you will see three small tables labelled Servicing query complex, servicing query simple and total.

I need to extract the blue cell, being the name of the table, the purple cell being the last figure in column c in each table (total number or processes) and the green figure being the the average turnaround. The final figure is i think the hardest to get as its the total number of figures in column c that have either a 0 or a 1 in Colum A. Note that their will be table where neither 0 or 1 will appear.

All figures are dummy figures but the table structure is correct.

View 14 Replies View Related

Updating Excel Table Values Into SAP Tables

Jul 23, 2012

I want to write a interface program using VB Macro, for updating the Excel Table values into SAP Tables. Is there any macro that can do this work?

View 4 Replies View Related

Combining All Data Tables Into One Master Table

Apr 10, 2014

I have 10 workbooks that each contain a table of data. Each table is consistent in format and headings.

I need to group all 10 tables into one big table. I do not want to merge or combine data just simply have all the data in one master table.

Previously I have used named ranges and arrays to copy them in but this seems cumbersome and thought there must be an easier way to do it.

View 4 Replies View Related

Excel 2013 :: Pull A PowerPivot Table Off Of The Tables?

Mar 22, 2014

I threw together some sample data, just to test things out. It's very basic, one table of "Customers" and another table with the 50 US State's and their corresponding abbreviations. In the "Customers" table, there is a column of state abbreviations, and in the "States" table there is a column of state abbreviations as well. I have a relationship set up between these two in PowerPivot.

Each "Customer" in the "Customers" table has a unique "User ID". In some states, there are multiple "Customers" (User ID's).

When I try to pull a PowerPivot Table off of these tables, it's showing me all the states as being associated with every user ID. It looks correct if I just pull in the "States" column and the "User ID" column from the "Customers" table...

image1.jpg

But as soon as I drag in the "Full State Name" column from the "States" table, it screws up the PowerPivot Table and shows all the state names being related to the state abbreviations, and all the User ID's as being related to all the states. (This isn't the full image of the table, only part of it, since the full image would be too large).

image2.jpg

I'm used to doing everything with VLOOKUP's, and seldom used PivotTables at all in the past. But it was my understanding that these new PowerPivots would eliminate much of the need for VLOOKUP's.

View 2 Replies View Related

Converting Two Tables In Different Sheets Into (Pivot?) Table In Another Sheet

May 27, 2014

I have a portfolio of 23 funds and I need to calculate IRR for each one every month.

The problem is that I have dispersed information for each fund.

For instance in sheet CashCallsBD I have a table with the funds cash calls. This table has a first column with the Fund Name then other column with the cash call date, another column with the cash call value. This table may have other columns. One fund may have several cash calls.

In sheet DividendosBD there is a table with some columns that refer to cash distribution movements. The main columns relevant for this case are Fund Name, Date and finally Cash Distribution (signed in red in the attached document)

And then my problem: In order to calculate IRR for each fund I need to create a table (for each fund) that merges and sorts the information of CashCallsBD, Dividendos BD and present market value for each fund and then apply the XIRR function. For each fund this sorted table would have at least 2 columns (date and values).

View 3 Replies View Related

Table Manipulation Based On Header And Details Tables?

May 19, 2014

I have a table which is extracted from a database using 2 tables.

1 Header and 1 details table.

I want to display the latest date in column E.

As Column A,B,C is the header table and column D,E is the details table.

Can this be done in vba or a pivot?

View 1 Replies View Related

Excel 2010 :: Filter Table Into Smaller Tables?

Jan 4, 2014

I have a table that contains all my data and would like to filter it by company into their own tables that will stay up to date with the main table and then hopefully somehow calculate their investment returns (future stage). I thought Microsoft Query would work but I came across a problem see my other post MS Query returning data to excel some columns I cant sum looks like text

Excel 2010

View 1 Replies View Related

Multiple Pivot Tables - Single Table Of Source Data

Mar 9, 2014

I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.

Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...

Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg

View 1 Replies View Related

Create Large Table From Smaller Tables When Columns Not In Same Order

Jul 17, 2014

I have a lot of data to try and summarize but they are in multiple smaller tables. I wish to only extract 2 variables, 'number' and 'total' from all of my smaller tables (lots of them) so the problem looks like this, i have these tables for example where the 'total' title is in a different column depending on which of the smaller tables you are looking at:

cat 1
cat 2
cat 3
total

[Code]....

I am trying to get:

number
Total
123456
30
234567
60

[Code]...

Because the number column is fixed and all of the smaller tables will all have a number in the same column maybe i can insert a column next to the number column and say "find the value where the column title is 'total' - however the location of the column title would change so not sure if this would work? I was also thinking of sorting the columns but that will not work either because of the smaller multiple tables?

View 4 Replies View Related

Create Report Table From Two Original Tables (source And Select Criteria)

Mar 31, 2014

I have two tables (Table 1 and Table 2). Table 1 has names of all employees in my organization ('Name' column) and corresponding information in the second column ('Textinfo'). I need to create Table 3 from table 1, but only select those employees who are in my team, ie matching names in the Table 2. I also need to extract corresponding 'Textingo' column information. I tried vlookup but it did not work because if there more that one name in the table 1, vlookup confuses it (i think). Would you know what function or code to use?

Sample file is attached : excel question 1.xlsx

View 2 Replies View Related

Excel 2010 :: Creating Multiple Tables In VBA And Referring To Newly Created Tables?

Jul 1, 2013

Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.

Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.

Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then

[Code].....

View 2 Replies View Related

Adjust Column Label Selection Multiple Pivot Tables Based On One Pivot Table

Aug 16, 2013

I have a pivot table in the first sheet which includes the field "Date" as a column label.

In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.

I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.

note that the field "Date" is used as a Column label, i.e., it is not a Report filter.

View 3 Replies View Related

Formula That Links Cells In Tables Together With Cells Not In Table And Give Sum

Apr 18, 2014

What I'm trying to do is link a cell to give me the sum of 2 different cells located in 2 different tables I created.

So I want to have Cell B5 look for the number in cell B3 in the Table that starts in column Q1 and give me the corresponding number in the same row in the column R1

then lookup the number in cell B1 in the Table that starts in column T1 and match it with the number in Column U1 that corresponds to it in the same row

and Finally give me the sum of both corresponding numbers.

IE.. the number in B3 is found in Q13 which uses the number it corresponds to in R13. The takes B1 finds it in T16 and uses the number it corresponds to in U16.

Then returns the sum of R13 and X16 into B5. (B5 should show 176)

View 5 Replies View Related

Refresh Pivot Tables Linked To Pivot Table

Jul 25, 2006

I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these

Sub Macro1()

ActiveSheet.PivotTableWizard SourceType:=xlPivotTable, SourceData:= _
"PivotTable1"

End Sub

View 6 Replies View Related

Pivot Table Based Off Multiple Pivot Tables

Sep 5, 2006

Is it possible to create pivot table from another multiple pivot table.

Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table

View 3 Replies View Related

Can Pivot Table Be Created From Several Other Pivot Tables

Mar 5, 2014

I have 12 months worth of data in twelve separate workbooks each with a pivot table, I have copy/moved the pivot table tab from each into one workbook so now I have a workbook that consists of 12 tabs each with a pivot table. What I would like to be able to do is create a summary table with the full years data; where I am running into problems is that each months table has slightly different row and column counts and labels making any formula like =sum([sheet 1 cell a1]+[sheet 2 cell a1]) problematic.

View 3 Replies View Related

Pivot Tables: Pivot Table Layout

Oct 14, 2003

if there is a way to display a table as column percentages but have the totals as raw numbers.

View 9 Replies View Related

Splitting Sum Value With Different Format

Apr 11, 2014

I need some formula how to sum data with different format (general & $ (currency), splitting summing,

check this below :

<style type="text/css">
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;

[Code] .....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved