I have a worksheet with an auto filter to display only non-blank rows. Each row is a ledger account, with a cost. The formula in each cell sums the total of its corresponding gl in another worksheet, but also takes into account the region I am asking it to search based upon another cell. So the cost in a specific can fluctuate based upon which region I am telling the rows to lookup. So it can be blank with one region and populated with another. When I change the cell that tells the row data to look up a new region, the auto-filter does not automatically update the list of non-blank cells based upon the new region being searched, but rather the old one. So what is happening is I am left with an incorrectly auto-filtered result.
Is there a way to get the auto filter list to automatically update for the refreshed list of rows?
what i have is a workbook with 4 worksheets. each is a list of tapes that i use for back ups.
each worksheet has a auto filter so that i can filter by the day i need to use the tape. i.e. when i select monday it displays mondays tapes only.
what i want to do is take the result from this and copy it into another sheet so when i select tuesday it copys onto a 5th sheet in a specific area.
i would also like it to change the day on all sheets filters from a single drop down. i cant put everything on one sheet as there are duplicate tapes and days.
I have an Excel Workbook with Showcase Queries embedded into it.
Upon a manual open, the user is prompted to either refresh data or keep data since last save, the user then has to enter a username and password to allow the query to access the database.
Using the code below to open the workbook, no such prompts are given. Is the code overriding the prompts and automatically refreshing the data without password? [Given nature of data, visual validation of refresh is not possible]
If not, how can we code a data refresh through showcase query with user/pw req's?
I am trying to find a way in which a used can enter text into a cell (effectively the search cell) and then that text is compared to text in 3 or so columns, if the text matchs any part of the cells in the those columns then the spreadsheet should filter out the rows that dont have a match and only leave rows that have a match.
Its like having a spreadsheet with a list of part an user can put in 55 or bolt in the cell at the top and the list would only then show all the rows that have 55 or bolt or whatever text in the table below?
Use filter for 2 columns of a CSV file, column A and Column B for certain words. Say I apply a text filter: contains "word1" or contains "word2" to Column A. Then I get the results. After that, I remove the filter to Column A then apply the same filter to Column B. The thing is, I don't get the results in Column B, instead, I get the cells in Column A wherein Column B is filtered PHOTOS BELOW:
The data that I get for this filter are: And Word1 you Word2 is blank
Apply filter to Column B, get the cells filtered in Column A:
The data that get for this filter are from Column A (which are cells filtered from Column B filter) And Word1 you Is the blah Word is all
The results should in a single Column for both filter:
I have more than 100 files that needs to filtered this way, is there any way I can do this automatically?
Here is what the file looks like:
The results I hope would be possible:
Automatically without having to open all the files and have the results of all of it in 1 single Excel file?
----or----
If the above is not possible, open each file and automatically apply the filter into a column in just 1 click and without having to type the same filter for each column.
I found a code to combine all CSV files into 1 Excel file, but half of my files has more than 500k rows and the Excel's limit for rows is around 1million+.
I have a problem with the attached spreadsheet. I have certain letters (A,B,C etc.) that are shipped to various regions. I would like to have a count on top to count the total number of orders, but one that also counts the total number of unique orders. However, this unique count has to be dynamic and must be able to adjust accordingly to the filters (by default, if no other filters are applied, should be 15). For example, if I apply the "Ship To" filter to Canada, the total number should be 19, but the unique count should be 12. If I change the "Ship To" filter to US, the total number should be 9, and the unique count should be 7. I've tried to use the advanced filters but if I apply the unique entries filter, it is only a one time calculation. Also, the advanced filter gets rid of my other filters.
I wasnt sure if I could make a shortcut on the screen, such as a button that says "Reset all filters". I need to make it very easy for non-savy excel users, and would like to stray away from using any keyboard shortcuts, that will Be hard for them to remember, but I will use this if absolutely necessary.
I have a list of data entries. I use auto-filter, to view them according to which category they belongs to. However, when I wanted to sum just the quantity associated with the criteria which I am filtering, I couldnt find a formula which does that
I have designed a Macro to use an Advanced Filter to search for specific criteria in different columns. I would like the results to bold or highlight the cell if it meets the criteria for the advanced filter. There are multiple numbers in each row that are associated with each record, and I would like to be able to see which of these triggered the filter to work for that row by bolding or highlighting the individual cell.
i have a work book of 12 sheets, the two main sheets 1+2 have 5000+ rows. by 30 columns. each row column b is a site number in ascending order(up to 4 for each site) so auto filter select = to site 5 about 10 seconds later i get the result of 3 sites try site 846 30 odd seconds later up pops the result. so i copied the sheet to a new work book and tried and it's nigh on instantaneous. next step copied sheet paste special values into new sheet in same original workbook and tried filter on that still slow as ever, thing is this book around 8meg and i cant for the life of me work out why ive cleared excessive formats and reset last cell on each sheet. there is a vlookup from sheet 1 to 2 for each site to return serial numbers. i have tried it in vba by turning autocal off/on but still no difference.
I have the following code that copies only the visible cells in an auto filter...how could I modify this code to paste only the values and not the format?
I have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10 Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1 2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults") 3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2 4. Repeat Step 2 . . . Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
I want to see if the people on list one are on list two. I need to come up with a formula that gives TRUE for each person on list one who is on list two and false for each person on list one who is not on list two. Several caveats: 1) there are people on list one who aren't on list two and vice versa, 2) the people have several defining characteristics which need to be met, and 3) dates are involved.
With respect to point three, TRUE should only appear if the people on list one are on list two and if they were employed by the organization on a specific date (ex: 3/5/1996); in order for the TRUE statement to appear in the G column, the person should not only be on list two but also be employed on a specific date. The specific date should fall within the start and end employment contract.
I have 3 pivot tables and with 3 filters each (they are all the same filters). I just want to change 1 of the filters for each of the pivot table (meaning the other 2 stay the same for all of the pivots). Is it possible to have a filter change automatically to match a filter in another pivot?
I have to print invoices by order number and product. The way I have done this creates blank spaces on my invoice sheet. If I could remove the 0 results without deleting the row it would bring all parts of the invoice together so there were no gaps.
Find attached an example sheet. I have one list with data... Name, Handle, Result. I want to have three lists from that data
List 1 would have top ten highest results List 2 would have top ten lowest results
Some results will be the same so I would need each Name listed as they appear in the main list until ten is reached. List 3 would have top ten handle, but would not include anyone in list 1 or 2. This will be a shared workbook
In sheet 2 of my workbook I have a whole bunch of formulas that process data from a timeseries in sheet 1. What I want to do is to make a macro that will export the results of some formulas into a list in sheet 3, so that I can keep this info as I move on to the next time series.
Export the result of cell D15 in sheet 2 to cell B3 in sheet 3. But if B3 already contains information from another time series I want the info from D15 to go to cell B4 and so forth.
I have created a formula that returns 2 dates and the number of days that lie between those dates (less weekends)..
eg.
Friday 22/12/06 Monday 8/1/07 10 days
What I would like to do, but can't work out how, is create a button (and a function or macro or whatever) that transfers that data to another sheet, adding to columns of previously calculated data.
I have a problem with my spreadsheet. I am trying to created a sheet to record time trials for bicycle racing. I have created in the main tab 'time entry' a class, rider #, name, incremental start time, and finish time. There will be 6 classes of racers (i.e. xm,xw,sm,sw,nm,nw). What I am trying to accomplish on the results tab, are the results based on the riders class. All of the riders classed as 'xm' listed with their respective info and time. I have attached a copy of what I have so far.
I need to start a list in cell a8 on sheet1. I need it to find and list multiple results vertically. It will lookup what is in cell a1 on sheet1. The table of info is on sheet2 from a1 to b44. Column a on sheet2 has the values of what is in column a on sheet1 and column b is what I need returned to the cell with the formula.
I have to create a series of drop down lists with choices on it for people at the company to fill out to see how much time they spent on each type of project. The plan is to have people fill out a "daily form" to see how much work they did that day, and have the results of that feed into a "monthly form" to sum up how much they worked that week. One of the aforementioned drop-down lists have them choose between three categories of work, M, N and B.
I have to make it so that in the monthly form, the results from the daily form segregate themselves into the different M, N and B tables in the monthly sheet. To make it more clear, on the daily sheet, there is just one huge table. For each row, they are to input what type of work they did, how long they worked, etc. On the monthly data table there are three different tables, one for M, one for N, and one for B. I want to have the entries from the daily spreadsheet to feed themselves into one of the three tables in the monthly spreadsheet depending on whether M, N or B was chosen.
I am using the VLOOKUP function to pull multiple columns of information from another sheet in the same workbook based on a name. The sheet it is pulling from is a query. I am looking up product names, and in the query there may be multiple results that the function can find.
VLOOKUP only returns the first result that is found. What I am trying to do is get it to dump all the results into a drop down list in one cell. If I attach a drop down to one of the columns of information I am retrieving, then I can select which of the entrys to display, right? I think this should work I just don't know how to go about setting it up to do it.
How would I set up a VLOOKUP formula that attaches a drop down list containing all the results that the function finds?
I'm working on an invoice generator, and I want to add a "lookup by phone number" feature. I've got an invoice database with invoice info stored horizontally for past invoices. On a separate sheet, I want to be able to type in the phone number in range ("O11:Q11") and have a list of invoice numbers and dates matching that phone number appear in Columns R and S respectively.
Here is some workbook info:
Invoice generator is in 'phonelookup' Invoice database is in 'invoice database' and the table is called CompInvoices In CompInvoices, Invoice numbers are col1, dates are col2, and phone numbers are col7.
I have used INDEX/MATCH/ROW/SEARCH functions, in different permutations, but I am unable to get the result. The data set is something similar to the below:
Car Region Own Use Color
Honda North Yes I use it to go for work Green
[Code] .....
I want to be able to do following (2 separate tasks):
Task 1 (if in A1 on a new sheet, I had Use, i want to list all the items in an adjacent column, skipping the blank rows)):
Use
I use it to go for work
Family trips Weekend fun 2nd car Work
Task 2 (if i had Honda (A2) and North (B2), I want to have the colors listed in Column 3):
Car Region Color
Honda North Green
White
I know this can be done by an auto-filtering or manual sort, but I have work with thousands of similar data on a regular basis, and i want to find a formula that will allow me to list the items based on different criterion.
I have two Spreadsheets, lets call it Spreadsheet 1 and Spreadsheet 2.
Spreadsheet 1 has a list of partial employee names in column A. Spreadsheet 2 has a list of 500,0000 full employee names in column A and their phone number in column B and address in column C through E.
Basically what I want to do is do a wildcard search for the partial employee name, so like lookup Spreadsheet 1' Column A's *name* in column A of Spreadsheet 2. Based on the number of matches. I want to insert that many blank rows underneath the partial employee name, and paste those matched rows there, then continue to the second partial employee name lookup and repeat the process.
