I have two excel sheets with order details.
Sheet1:A1:Order ID, B1:City, C1:State
Sheet2:A1:Order ID, B1:Rate
Sheet 1 only contains successful order ID's In Sheet 2 there are many order ids with pending, failed, successful transactions.
I want to compare Sheet1:A1 with Sheet2 full range Order ID's. If there is a match it should copy B1:rate to Sheet1 D1 and so on. I tried some VLOOKUP formulas but they did not work.
formula below.
Crude and does not work.
I hope what I have said makes sense and can be written correctly.
'If WorksheetFunction.CountIf(Range("A:A"), Cells(i, 1).Value) > 1 Then
copy.Range("U:U"), Cells(i, 1).Value)=1
Cells(i, 21).Paste.Value.Count > 1
Basically, For Each Value in A that's identical. I need the value in "U" in the row for the first value in A to be copied down to the last row for the specific value in A.
I have two ranges AA:DD and F:G, I have to find matching pair in AA:DD and in F:G and copy H and add as a comment to D, its hard to explain. see my attached workbook.
View 5 Replies View RelatedI had a quick look around and couldn't find exactly what I was after my apologies if it already exists. I have attached a sample worksheet and I would like it the entire row A from sheet 1 to sheet 3 if the cells A2 OR D2 contain what is in cell Sheet2!A1.
View 3 Replies View RelatedI am trying to copy images from one worksheet (master worksheet with all data and images) if a cell value matches and place onto a separate worksheet with select rows on it. I've watched this tutorial: [URL], but it only shows how to do it in one cell rather than a whole column.
Essentially if the figure in column A matches in the second worksheet, I want the row data to be duplicated including the image.
For the copied data from the master worksheet to another, I used VLOOKUP and it works great but obviously that won't work with images.
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
I'm trying to use the below formula to to return "true" when text in cell (M2) matches text in selected cells on same row (A2, E2, and G2)
However, all formulas I found online that serve this purpose deal with cell range only, not predetermined cells with exclusions.
Formula:
=IF(ISNUMBER(MATCH(M2,A2:G2,0),TRUE,FALSE) (This will match all cells between A2 and G2 against M2)
reforming this formula to match selected cells only in-between that range (A2, E2 and G2)?
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
My goal would be to click on a cell within a range of cells (in a column) and have the value copied to a specified destination cell. There would be a few different columns with source cells and two destination cells. Each column would to copy to a specific cell. My ojective is basically to deal with different processing times (days, weeks, months).
Here's a little visual, clicking on C4 for example would copy the value "5" to cell B2. Clicking on D4 would copy "12" to A2.
row/col
A
B
C
D
E
1
Days
Weeks
Processing time X (weeks)
Processing time Y (in days)
Processing time Z (in weeks)
2
3
10
110
3
4
11
111
4
5
12
112
5
6
13
113
I have a spreadsheet (book1.xls) that has a column with 13 names down the side and 31 other rows (dates of the month)
Mike1 1 2 3 4 5 6 7 8 9
Mike2 1 2 3 4 5 6 7 8 9
Mike3 1 2 3 4 5 6 7 8 9
Mike4 1 2 3 4 5 6 7 8 9 etc
I have selected all 13 rows and 7 days and named them 'week1', and the next 7 days 'week2', the next 7 days 'week3' etc/What i want is to display the named range based on a single cell selection based on a cell value in a different sheet.
The basics of it should be "If cell C1 = 1 then show me 'week1' or if cell C1 = 2 then show me 'week2' etc.
I have a hyperlink cell. Straightforward copying and pasting it to another cell works well, with the new cell replicating the hyperlink. However, if I try to copy the hyperlink cell to a range of cells (say B1 to B5), at first it looks ok, but once I click one of them, it appears they are all clicked. And if I delete one of the cells in the range, say B3, ALL cells within that range loses its hyperlink. It looks like all of these hyperlinks are referencing one another, but once I delete one cell, the rest loses its hyperlink (the words are still there). At the current time, I have to copy into the range individually (copy to B1, then B2, then B3...etc), but this becomes a hassle if I have a large range.
View 7 Replies View RelatedI’m trying to write a macro to look down two different columns in my work sheet and if the is a value >0 then copy a set range of cells to another sheet,
I need to search column (k) and (x) range (“K2 : K147”) and (“X2 : X147”) in (sheet1) for values >0 if there is, then copy from (“f : m”) if it is found in the (k) column, or copy from (“s : z”) if it is found in the (X) column, and paste value only to the next empty cell in sheet2 . Sheet2 is empty so (A) on down is fine for paste range. There is a spin button in the copy range column (L) and I don’t want that picked up in the copy. Manually I (paste text) only but I think (values only) will do the same thing.
[Code] .........
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an x next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say Brown Corp. and the bank side might say Brown Corporation. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a x to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
I have a recipe and a set of instructions on a worksheet in the cell range A1:H50 and would like to copy the whole range to a single cell as a Comment.
At the moment I select the range, copy and paste it to MS Word.
In Word, I select all and copy, then back in Excel, select cell, insert Comment then paste the text into the Comment box. Then I have to resize the Comments box. Also doing it this way loses some of the original formatting I could get round that by saving the cell range as a picture and inserting the picture in the Comments box.
Surely there has got to be a better way. Using 2007 Excel & Word
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
i have a sheet with a list of products,prices quantity etc
what i want to do is if a cell has a greater value than o then copy a range of cells to another sheet in the next available row
could this be done with =IF or would it need a macro to do it.
I have this code I wrote (combining variations of existing ones).. but not very well. unfortunately doesnt seem to work. It copies the information back onto itself
View 5 Replies View RelatedI created the following code to copy the contents of b6 down. However, I need to modify the code to copy this formula =IF(M6=calculations!$E$34, N(B5)+1,N(B5)) down the range.
Sub copyformulas()
'copy and paste cells with formulas down. Select B6 throubh AH6 and copy the formulas down to the last employee ID.
Dim lr As Long
For Each SheetName In Array("All employees annualized", "All employee salary", "All employee hourly", "allmaleee", "allfemaleee", "cohort analysis", "minority", "nonminority")
With Worksheets(SheetName)
lr = .Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
.Range("b6:b").AutoFill Destination:=.Range("b6:b" & lr)
End With
end sub
I have a timeline in tab 1. I want to copy a specific cell range from tab 1 to tab 2 but when I make an edit to tab 1, I want it to show up on tab 2 automatically. I believe that's cell referencing but how do I reference an entire range?
View 1 Replies View RelatedI 've a table of data It begins from A4 :f last row
In "A"column dates and in the other coulmns from b:f different data
in cell "g4" Iwil write the new sheet name
In cell "h4" I write the starting date
in "i4" I write the end date
the starting date and the end date are equal to values in range (A:A)
now
i want a vba code to select the part of table which starting with the row where is the starting date-("h4" ).value- is found in range(a:a) ,and the end of the selected part of table can be difined according to the "I4" value.
after selecting this part of date i want to copy it to sheet according to G4 value
I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
View 3 Replies View Related