Copy Cell Value Down For Each Matching Value In A
Jun 16, 2009
formula below.
Crude and does not work.
I hope what I have said makes sense and can be written correctly.
'If WorksheetFunction.CountIf(Range("A:A"), Cells(i, 1).Value) > 1 Then
copy.Range("U:U"), Cells(i, 1).Value)=1
Cells(i, 21).Paste.Value.Count > 1
Basically, For Each Value in A that's identical. I need the value in "U" in the row for the first value in A to be copied down to the last row for the specific value in A.
View 12 Replies
ADVERTISEMENT
Feb 15, 2007
I have two ranges AA:DD and F:G, I have to find matching pair in AA:DD and in F:G and copy H and add as a comment to D, its hard to explain. see my attached workbook.
View 5 Replies
View Related
Jun 24, 2008
I had a quick look around and couldn't find exactly what I was after my apologies if it already exists. I have attached a sample worksheet and I would like it the entire row A from sheet 1 to sheet 3 if the cells A2 OR D2 contain what is in cell Sheet2!A1.
View 3 Replies
View Related
Feb 20, 2014
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
View 1 Replies
View Related
Jul 22, 2014
I am trying to copy images from one worksheet (master worksheet with all data and images) if a cell value matches and place onto a separate worksheet with select rows on it. I've watched this tutorial: [URL], but it only shows how to do it in one cell rather than a whole column.
Essentially if the figure in column A matches in the second worksheet, I want the row data to be duplicated including the image.
For the copied data from the master worksheet to another, I used VLOOKUP and it works great but obviously that won't work with images.
View 3 Replies
View Related
Feb 1, 2014
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
View 8 Replies
View Related
Sep 4, 2013
I have two excel sheets with order details.
Sheet1:A1:Order ID, B1:City, C1:State
Sheet2:A1:Order ID, B1:Rate
Sheet 1 only contains successful order ID's In Sheet 2 there are many order ids with pending, failed, successful transactions.
I want to compare Sheet1:A1 with Sheet2 full range Order ID's. If there is a match it should copy B1:rate to Sheet1 D1 and so on. I tried some VLOOKUP formulas but they did not work.
View 4 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Nov 19, 2009
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
View 12 Replies
View Related
Dec 17, 2009
I tyring to match column A:B with column F:G and copy the value in column H to column C.
View 3 Replies
View Related
Jul 23, 2013
I have two open workbooks, the first is called "Original Data.xls", the second "SIP.xls".The "Original Data" workbook contains a sheet called "Data" which has a list of information in the column range 'B:H', starting at row '4'.The "SIP" workbook contains a sheet called "Staff" which has a list of unique ID's in column B, starting at row 4.What I'd like to be able to do is compare the unique ID's in column 'B' of the "Data" sheet to that of the unique ID's in column B of the "Staff" sheet. NB.
There could be multiple records for the same unique ID in the "Data" sheet, but they will only occur once in the "Staff" sheet.If a match is found, I'd like to copy the row from the "Data" sheet and paste this to a sheet called "Matched", starting in B4, also contained in the "Original Data.xls" file.As each match is found I'd like to paste this into the next available line on the "Matched" sheet, and I would like, if at all possible, for the macro to continue checking for multiple entries until column 'B' in the "Data" sheet is blank.
View 4 Replies
View Related
Jul 10, 2006
I'm trying to use a vlookup or some formulae in sheet 3 that looks at AGDP and matchs column A with a number in statement file worksheet column b. If they match not all of them will then the row is cut and paste into Sheet 3.
View 9 Replies
View Related
Aug 8, 2006
I have 2 work books A and B. I want to be able to copy the entire rows out of WB A, which contain the same data as one of colums in WB B
e.g
WB A
Bob Smith | 3 Smith Lane | 0204587512 | bob.smith@emailaddress.com |
Tom Brown | 3 Brown Lane | 020241445 | tom.brown@emailaddress.com |
WB B
| bob.smith@emailaddress.com |
Would give me WB C
Bob Smith | 3 Smith Lane | 0204587512 | bob.smith@emailaddress.com |
Any way of doing this?? I know that i could use ' find' then copy the data, except i have around 300 records...
View 3 Replies
View Related
Nov 12, 2006
I have 2 worksheets in excel.
1. No. Description Code Req Unit Amount
1 Description 591032 1 pc ?
2 Despription 614804 25 pcs ?
etc.
2. No. Code Description Unit Qty Items Amount
1 591032 Description pc 1 84.30 84.30
2 614804 Description pcs 25 0.89 25.25
etc.
I would like to copy the amount in worksheet 2 to paste it to worksheet 1, by searching using code value. Advice: the codes are in different places in worksheet 1 & 2
View 3 Replies
View Related
Jan 3, 2007
setup a vba code to find values which were separated by a certain value, thus there would be pairs of numbers sought after. What occured was that the first value is bolded, followed by the second not bolded, this pair would be separated by 75. Now I want to apply the same code, but instead of copying just the two cells which were separated to someone on the current sheet, I would like it to copy the entire row (as there is more data associated with it now) with the same bold/not bolded pairing to a new sheet, called "Numbers". I would imgine it be straight forward, yet I am very new to this and still tinkering.
Heres the ....
View 9 Replies
View Related
Jul 25, 2007
I have a workbook with 3 sheets. AP, Move, Match. AP & Move will be about 40,000 lines.
I need a macro that will take the data from those two sheets and match them up on the match sheet by column A Line by line with all data moving over. An example is attached.
I'm not sure if this is possible, but please let me know if you need more info because I really don't want to do this manually. Anything that doesn't match I just need a blank line. I can add the true-false formula, but if it would fit in the macro that would be cool to.
View 7 Replies
View Related
Sep 15, 2007
I have used marcos to create two worksheets and need to compare each row of the first three columns in each worksheet to find any rows which non-matching data. I am comparing retrieved data (Worksheet1) against a master list (Worksheet2) to ensure the retrieved data was entered correctly. The three columns of data include Manufacturer, Lot number and Date.
The row in which the matches will occur is random. The three values from the retrieved data only have to find a match somewhere in the master list. I can place both the retrieved data and the master list side-by-side on the same worksheet if that would make things more efficient for running the comparison.
The non-matching rows, if found, will be copied over to another worksheet along with its corresponding row in columns "D" and "E" found in Worksheet1. The additional data alerts me to the location where the data was entered incorrectly. The master list does not have any location data in it.
View 5 Replies
View Related
Jan 8, 2008
I want to filter data using two sheets. i want only the names in a field that are listed on BOTH sheets. i have a two lists of names and i want only the names that are included in both sheets while still including the rest of their information.
View 4 Replies
View Related
Jan 17, 2008
I'm trying to eliminate any .select or .activate from my code to speed things up and reduce screen flicker. At the moment, I have a sheet created at the click of a button. Basically for every date exclusive of weekends, there are 4 entries, for each date there are the following entries AM Metro, PM Metro, AM Regional, PM Regional. The user wants to be able to change the date range in the "overview" sheet and when there is data already in the other columns for these matching rows, have the input sheet update with old (copied??) info, if no previous data then add all 4 rows and sort... if previous date not in date range then delete entire row.
View 4 Replies
View Related
Apr 18, 2008
I am trying to find a way of comparing entries in one spreadsheet to another spreadsheet and generating a third sheet of those that do not match.
As an example, I have a spreadsheet of approved supplyers, with name, reference and date in each column, and a speadsheet of used supplyers, some with references and some without. I want to compare the supplyers used to the approved supplyers list by reference number (which are in the same format), and produce a third sheet listing all those that do NOT match e.g. unapproved supplyers.
I need to make sure that the third spreadsheet only lists each seperate supplyer once, even though they may have been used several times, AND it must also include supplyers without a reference number.
I will use this to compare many spreadsheets with the same data, but of varying length and would like to use a macro to perform this function.
View 6 Replies
View Related
Jul 15, 2014
I am trying to copy a row based on the value of a cell.
I have two sheets in my workbook and on sheet 1, I have a part number and a description. On sheet 2, I have part numbers again, but this time I the description is broken up into the format I need.
What I am trying to do is have excel search on sheet 2 for the part numbers, then copy the information that corresponds to the part number into the correct column.
I have tried using Vlookup. But if the part number in row 2 on sheet 1 match the one in row 8 on sheet 2, this will copy over the data from row 2 whereas I need row 8.
If this would be more doable using VBA, that is fine by me. I haven't been able to figure out anything in VBA or in excel formulas up to this point.
View 7 Replies
View Related
Jun 24, 2014
I have two sheet one is copy sheet and other is past sheet. In Paste sheet Header Title is fixed values , copy sheet header title also same but its not proper aligned & few header title not available. I want to transfer entire data from copy sheet to past sheet matching with header title. No need to change paste sheet Header title & alignment order.
Attached File: Data Transfer.xlsx
View 3 Replies
View Related
Feb 18, 2014
I'm using the code below to compare columns on two sheets (1 column for each) and where there is a match, copy data from the 'Source' to 'Destination' sheet.
[Code] ...........
The code works fine, but I'd like to amend this, but I'm a little unsure about how to proceed.
The script currently compares column C on the 'Source' sheet with column D on the 'Destination' sheet and where a match is found copy column G from the 'Source' sheet and pastes this to column O on the 'Destination' sheet.
I'd still like to copy and paste the same columns, but I'd like to compare two columns from each sheet, so from the 'Source' sheet compare columns C and E to columns D and J on the 'Destination' sheet.
View 2 Replies
View Related
Jan 6, 2014
I have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
View 5 Replies
View Related
Jan 31, 2014
I am trying to match headers of different files and copy data.If the one of the header is not matched then a new column with the non matching header should be created and the column has to be copied
Ex: file1.xlsx has AA BB CC as header
file2.xlsx has AA BB DD EE as header
file3.xlsx should contain AA BB CC DD EE i.e data from file1.xlsx and file2.xlsx
I have more than 300 files how can I copy all the files to one excel file by matching headers ?
View 1 Replies
View Related
Oct 5, 2009
I have a userform in a workbook and depending on what selection the user makes from a combo box, I want the data to get pushed into the relevant sheet.
I did think I could get away with
If Me.cmbtype.Value = "Tool" Then
Set ws = Worksheets("Tools")
ElseIf Me.cmbtype.Value = "Guide" Then
Set ws = Worksheets("Guides")
etc but its now not copying data into Tools if I selected Tool from cmbtype (but when I select Guide it does appear to work).
The rest of the code is the same regardless of what type they select from cmbtype, its just which sheet the data gets copied into that changes.
View 9 Replies
View Related
Aug 28, 2007
On my worksheet (which I have stripped down significantly to be able to upload here), I am looking for a way to copy certain cells over when the TCR (machine) numbers match. So, on the spreadsheet, if there is a 1 on the De La Rue sheet in the A column, it will then copy the value that is in cell B (directly next to it) and paste it into the balance sheet tab in column J in the row that has the same number in it. It would then do this for all machines in the balance sheet.
Then it would go to the "Ecoin Amounts" sheet, and do the same match, copy, paste, but this time it would be if the machine number matches, it takes the value from column D and the value from column H and pastes these into the balance sheet sheet in columns C and E respectively.
As you can see from the balance sheet tab, I tried using a VLOOKUP function, but when I import my initial data to the sheets, and manipulate it the way that I want, it gives be a reference error. I could possibly circumvent this by writing the VLOOKUP amounts as part of my macro, but I wanted to see if this could be done any easier.
View 2 Replies
View Related
Sep 2, 2007
in writing a macro that does the following.
Right there data in cell A1 lets say LTP BY001 and then the next data in column A is LTP BY002 in cell A9. What I need to do is copy LTP BY001 from cell a2-A8 and then LTP BY002 From A10 until LTP BY003 appears lets say A15. Therefore need LTP BY002 copying from A11-A14. I need that to go right the way down the workbook at everytime their is a number change.
View 6 Replies
View Related
Jan 8, 2008
Does anybody have a code snippet to search and compare 2 sheets.
I want to read the value in a cell on the first sheet, then search the entire second sheet for a match, if it does match then copy the value from certain cells on the second sheet to the row on the first.
View 8 Replies
View Related
Mar 11, 2008
I have to write a macro that will copy the values of 'Items' in 'worksheet 2' to 'Items' in 'worksheet 1' ONLY when the 'Title' value is matching in both worksheets AND the value of ' Heading' in worksheet 2 is 'Entry1'.
Example:
Worksheet 1:
Title |Items
David
Bill
John
Worksheet 2:
Title |Items |Heading
David |A, B, C |Entry1
David |A, B |Entry2
Bill |A, B, C |Entry1
Bill |A, B, D |Entry2
John |G, H, J |Entry1
Gerry |G, H, R |Entry1
From the above data, I want the macro to compare 'Worksheet 1' with 'Worksheet 2' and only copy the 'Items' that have a matching 'Title' AND a 'Heading 1' value of 'Entry1'
So the final result should be:
Worksheet 1:
Title |Items
David |A, B, C
Bill |A, B, C
John |G, H, J
I have seen examples of compare used but not sure how to apply it to my case.
View 8 Replies
View Related
