=IF( SUM(S7:Y7)="","",SUM(S7:Y7)) - Produces 0
=IF(SUM(S7:Y7)="0","",SUM(S7:Y7)) - Still Produces 0
What I am trying to do is if ALL cells S7 thru Y7 are blank then be blank otherwise sum them. I've used this on a single cell, but not to test a range of cells. What I use for a single cell would be like this...
=IF(S7="","",S7) - Will not produce 0 if the cell is blank, just leaves it blank.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.
I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedI have an if statement as follows:
If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))
Then
i did a select to make sure it was selecting the whole range I want and it works fine:
Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.
im having a little trouble writing a macro to :
check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'
I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....
View 3 Replies View Relatedtrying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
I attach a sample of the sheet.
The application reads in a file, whcih can have various formats. To check which format it's in, I plan to look for certain empty fields/ cells. I can successfully detect a group of empty cells by explicitly testing each one, but when I put them all in a range and test that, the check fails. So far I've reduced the problem to the following example code.
Sub check_clear()
Range("g1:g8").clear
If IsEmpty(Range("a1")) Then
Range("g2") = "A1 empty"
End If
If IsEmpty(Range("b1")) Then
Range("g3") = "B1 empty"
End If
If IsEmpty(Range("c1")) Then
Range("g4") = "C1 empty"
End If
If IsEmpty(Range("d1")) Then
Range("g5") = "D1 empty"
End If..............
The result is that each individual cell check results in the relevant "XX empty" message. However, the test that the range of multiple cells is empty never produces a result. I'd really like to understand the underlying reason - as well as find out how to perform an isEmpty test on a range. I'm looking more for guidance and insight than a canned solution
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedI require a VBA code to fill Zero for empty cell in seceleted Range. Range will be select by Mouse.
I try following Code.
But It will not sucessed.
HTML Code:
Sub Zero()
Dim ws As Worksheet
Dim Specifiedrange As Range
Dim Rng As Range
[Code]....
It is about finding the number of unique items in a range that contains empty cells.I can intuit the form of this:
Formula:
[Code]....
And many of the variations of it when there are no empty cells in the range.
For a range of that contains empty cells I've tried this:
Formula: [Code] .....
And variations of it. It does not work, and I don't know why...............however..........
I ran across this on another [SOLVED] thread and it does work:
Formula: [Code] .....
I would have never considered this plausible. What is the magic behind appending an empty string to the criteria in the COUNTIF function?
It strikes me that this strategy likely has application elsewhere, too.
first time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I have a recordset that I get from Access and dump it onto an Excel spreadsheet. Many cells look empty but when I run a macro that depends on if these cells are empty it considers them not to be empty. Does anyone know what Access is putting in these empty cells?
View 4 Replies View RelatedWorking in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I am using code from http://j.modjeska.us/?p=31 which update WBS numbering. I have modified the code to run until the first empty row. What I would like to do is to have it run until it finds a range of 3 cells in column 3 that are empty. (I am sure that despite instruction some users will insert blank rows). Here is the
View 3 Replies View RelatedI have a set of spreadsheets that I am creating a macro for. The sheet reports Overtime data for the month for multiple teams.
For this section I am having trouble with this is what I want my macro to do. I was able to accomplish steps 1 and 2.
1. The data is sorted by Pay period End Date.
2. Then 3 rows are inserted between changes in PP end Date.
3. Total all data in column F and Column G in the first empty row after each date change.
* The number of rows will change from month to month. The constant I have will be the 3 rows after the date change will be empty.
Below is an example of the code that I have. I would like to accomplish this without using the subtotal feature.
Sub CopySort()
' This section Sorts the data on the spreadsheet
' by Pay Period End Date "J" then Employee ID "E"
[URL]...
View 1 Replies View RelatedI've run into a problem detecting empty cells. I'd like to search down a column of numbers and count the cells that contain numbers and ignore the cells that are empty. If the cells were made empty of their data by manually using the delete key before hand then my macro works fine. The problem is if the cells were manually made empty using the space bar to clear their contents.. then the macro seems unable to detect them as empty.
I have tried "", IsEmpty, and a few other things and nothing detects the cell as empty unless the delete key is used rather than the space bar. For this macro I really need the user to be able to clear values beforehand using the space bar, and to have those cleared cells be detected as empty cells.