CodeName To WorkSheet Name

May 16, 2009

I am trying to use a variable to refer to the worksheet code name and get excel to tell me the name of the worksheet.

Dim ShNum As Integer
Dim ShCodeName As Worksheet

ShNum = 5
ShCodeName = "Sheet" & ShNum

'what i need is the worksheet name

MsgBox ShCodeName.Name

View 9 Replies


ADVERTISEMENT

Calling Codename After Creating Worksheet?

Mar 7, 2013

The below example creates a new worksheet and tries to get the new worksheets codename. The problem is when I run the code, I can't seem to be able to pull the codename from the newly created sheet (ie Cell A1 = "" instead of "sheetx").

Sub test()Set mysht = ThisWorkbook.Worksheets.Add    x = mysht.CodeName    mysht.Range("A1") = xEnd Sub

View 4 Replies View Related

Variable To Refer To A Worksheet.CodeName

Jan 22, 2009

This is a simplified version of an earlier, long winded post that clouded my actual question.
Can I use a variable to refer to a worksheet by its CodeName? For example, let's assume I have several worksheets, with CodeNames of mySheet1, mySheet2, mySheet3, and so on. I understand that I can refer to them directly,

mySheet1.Range(myRangeName).value = someValue
mySheet2.Range(myRangeName).value = someValue
mySheet3.Range(myRangeName).value = someValue
.
but what if I want to do this using a loop? Is it possible to preload an array of CodeNames and do it that way? I'm thinking along the lines of something like...

Dim CodeNames
CodeNames = Array( mySheet1, mySheet2, mySheet3 ...)

For x = 1 to HoweverMany
CodeNames(x).Range(myRangeName).value = someValue
Next x

View 9 Replies View Related

Changing Worksheet CodeName Generates Error(s)

Jan 14, 2010

Reference: [url]

I delete sheet1, copy sheet3, rename to sheet1 and then attempt to rename the CodeName to Sheet1 as well.
This worked initially with out errors.

Now on the first run of the macro it generates an error:


Run-time error '32813':
Method 'name' of object '_VBComponent' failed

This fails to rename the CodeName of "Sheet1" (.Name)
Run it again and it renames the CodeName but generates yet another error:


Run-time error '-2147221080 (800401a8)':
automation error

View 10 Replies View Related

Get Sheet (CodeName) Not .Name

Jan 14, 2010

I can get a worksheet name and index, how do I get the worksheet (Name)?
Example:

I delete sheet1, copy sheet3 before sheet2, rename to sheet1 but the VBA name is Sheet4. The index number will be 1 but it is not Sheet1 in the VBA Project Explorer.

View 7 Replies View Related

Using CodeName In VBA To Set New Formula

Dec 17, 2009

I am writing a VBA macro to update a financial workbook. 10 of the sheets within the file are re-names depending on the start of production date. So, in one file they may be CY09, CY10, CY11...and then in another CY10, CY11, CY12. I need to update the Cell L14 on the first CY page to a value on the BOM page.

I want CYXX!F12 = BOM!L14
And CYXX's code name is Sheet3411

To do this, I want to use the code name - because it is the same in all the files I have (100+).

But I cannot find enough/right Codename reference information to make this work.

I tried:

Sheet3411.Range("F12").FormulaR1C1 = "=BOM!R[2]C[6]"
Sheets(Sheet3411).Range("F12").FormulaR1C1.....

I would appreciate if someone could help with this particular issue. (A little explanation of when I can and cannot use the codename would be appreciated as well. As this is something I will be maintaining for years.)

View 9 Replies View Related

Refer To A Sheet's Codename From Another Workbook?

Apr 17, 2009

I want to be able to safeguard against a user changing the name of a worksheet, so I use the sheet's codename in all my macros.

I have the codename of a sheet: shOptions

From a different workbook, "ActiveWorkbook.shOptions" doesn't work. How can I use "shOptions" in the other workbook.

View 14 Replies View Related

Rename Sheets-Worksheets Codename

Oct 31, 2006

I'm tring to create a newsheet and rename the codename but it doesnt seem to be working. Here is my
Private Sub Update_Button_Click()

AddYear = YearBox.Value

WFName = "WF Tracker SITE " + AddYear
wf = "WF_Edin_" + AddYear

Sheets.Add After:=WF_Template
ActiveSheet. Name = WFName
Sheets(WFName).CodeName = wf 'This line wont work
End Sub

View 9 Replies View Related

Code Protection Stops Re-Naming Codename

Jan 4, 2007

I have a Userform that allows a user to select a year eg (2007) from a listbox called yearbox where Yearbox.Value = AddYear. When the user Presses 'OK' the following code runs: ...

View 9 Replies View Related

Copy Worksheet In Workbook With All Formulas On New Worksheet Referencing Previous Worksheet

Apr 21, 2012

I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.

How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?

View 1 Replies View Related

Search Worksheet For Data In Multiple Textboxes On Userform - Display In Temp Worksheet

Dec 23, 2013

I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.

The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.

E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)

row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567

Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".

View 4 Replies View Related

Excel 2007 :: Automatically Change The Worksheet Tab Names With Cell Value In Each Worksheet?

Feb 14, 2012

I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?

View 3 Replies View Related

Create A Separate Worksheet That Has The Data In And Reference Cells On Budget Worksheet?

Feb 7, 2014

I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.

I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.

Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?

View 1 Replies View Related

Search Keyword In Worksheet / Copy And Paste Adjacent Cells To New Worksheet

Sep 24, 2012

I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.

[URL] ......

I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.

I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file

Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).

I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.

View 2 Replies View Related

Conditionally Hiding / Unhiding Rows In One Worksheet By Referencing Cell In Different Worksheet

May 3, 2013

coding a VBA macro for one of my workbooks, in which I need to be able to hide/unhide various rows in one worksheet depending on the value of a cell in a worksheet elsewhere in the workbook. The rows start off hidden by default.

As a simplified example:

Worksheet1 has a cell that has option "Set 1," and "Set 2." Worksheet2 has two sets of rows (say, 20:30 and 40:50) that need to be hidden/unhidden depending on the cell in Worksheet 1. These are hidden to start with!

So if Worksheet1's target cell says "Set 1", then on Worksheet2, rows 20:30 would stay hidden and rows 40:50 would be revealed, and then if the target cell says "Set 2," then on Worksheet 2, rows 40:50 would then be hidden, but rows 20:30 would then be revealed.

I was thinking of using something like this:

Rows("20:30,40:50").EntireRow.Hidden = True
If Target.Address="'Worksheet1'!A1" Then
If Target.Value = "Set 1" Then
Rows("40:50").EntireRow.Hidden = False
Else
Rows("20:30").EntireRow.Hidden = False
End If
End If

I think this might work, but every time I try to run this I get various errors, like not referencing my target cell correctly.

View 5 Replies View Related

Worksheet_change: Macro In One Worksheet To Run When Any Cell (in A Given Range)on A Different Worksheet (dataentry) Is Updated

Mar 27, 2007

I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub

If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then

On Error Resume Next
Application.EnableEvents = False

View 7 Replies View Related

Update Pivot Table On One Worksheet When Change Occurs On Another Worksheet

Jul 24, 2012

Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations

When a change occurs on PIR Tracker, the following occurs:

VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim Rng As Range
Set Rng = Intersect(Target, Range("A1:A500"))

[Code] .....

I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?

View 3 Replies View Related

Comparing 2 Lists And Counting Data From The First Worksheet To Fill Up A Second Worksheet

Aug 22, 2014

I've got a spreadsheet with 2 worksheets in it.

On the first one we've got:

Name of the agent | petition REf num | Task

Each petition can generate several tasks, one line per task.

John Doe | XXXX-YYYY | NCO
John Doe | | RIL
John Doe | XERT-WWWW | RMT
Jane Doe | QSZE-AQWC | RIL

On the second worksheet:

Complete list of agents | number of petitions | Status

John Doe | 2 | OK
Jane Doe | 1 | [BLANK]

I want to be able to fill in the second worksheet automatically. For each agent in my worksheet 2, I want to check if they appear in worksheet 1 and if so count the number of petitions related.

I don't know where to start

View 6 Replies View Related

Auto Copy Part Of Row In A Worksheet To Another Worksheet Based On Criteria

Dec 15, 2009

I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.

View 11 Replies View Related

Combining/merging Multiple Rows From One Worksheet Into One Cell In Another Worksheet

Jan 28, 2010

I'm trying to create a macro to merge multiple rows into one cell and display in a new worksheet.

This seems really simple but I've tried to re-work some other examples I've found online but none seem to do exactly what I need. I'm also pretty new to VBA , so it's highly possible i've missed something.

I need to display each set of Notes for each DonorNo in one row - with each note separated by a space.

I've attached a sample of the data and what I need for the output. In the actually file I have around 70,000 records so the prospect manually merging the rows is horrifying.

View 12 Replies View Related

Transferring Columns To Another Worksheet Based On Entry In Main Worksheet?

Oct 17, 2012

I have an order form created in excel with a list of about 1600 products. I have a column set up for the customer to place the ordered amount of each product. What I need now is a way to transfer only the rows that have a value in the "ordered" column to a new sheet. I have seen it before , but don't know how it was accomplished.

View 1 Replies View Related

Macro Which Saves Data From Temp Worksheet To Customers Worksheet?

Mar 17, 2013

Dropbox - Final.xlsm

Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.

View 9 Replies View Related

Pivot Table - New Worksheet Auto Create To Right Of Existing Worksheet

Sep 2, 2013

The new worksheet is created to the left of the existing source worksheet.

View 2 Replies View Related

Code To Auto Input Worksheet Name From Data Copied From That Worksheet

Feb 23, 2014

I am copying data from worksheet "Microsoft" to another workbook and paste in sheet1, i want the cell G1 to auto input the worksheet name "Microsoft" where i copy the data from,

How to have G1 show the worksheet name after i copy and paste the data from worksheet name "Microsoft".

View 6 Replies View Related

Set Textbox Control Source To Hidden Worksheet NOT Active Worksheet?

May 6, 2014

I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.

I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.

The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.

how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?

View 3 Replies View Related

Copying And Pasting Cells From A Worksheet Into A List Format In Another Worksheet

May 18, 2006

I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.

Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.

List of target columns in sheet 'Final' and source cells in sheet 'Source':

Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount

So basically I'm creating an entry for every amount in the table.

View 9 Replies View Related

Formatting Worksheet: Re-adjust The Worksheet To Make It More User Friendly Based On Number Of Rows In Current Sheet

Oct 14, 2008

I have a worksheet with 30,000 rows. But sometimes even if I have fewer records in this worksheet(lets say 1000) worksheet shows the same 30,000 rows.And its annoying when you try to navigate using vertical scroll bar. Is there any option to re-adjust the worksheet to make it more user friendly based on number of rows in current sheet.

View 2 Replies View Related

Worksheet Events: Use A Worksheet Event To Change The Background Of The Current Month Two Columns In The Range To Yellow Color

Jun 12, 2007

In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.

View 3 Replies View Related

Moving Data From A Monthly Worksheet To A Master Worksheet

Apr 9, 2014

Each month I get a report that is formatted by the customers and this sheet never changes. The problem is that the master sheet my job uses is not formatted this way. The master workbook has several sheets that breaks down the data from the monthly sheet. Instead of having to enter the data manually I'm looking for a way to export the data from the monthly sheets into the master workbook. As I stated the sheets are all the same but come from different providers and all contain the same amount/style of data.

View 1 Replies View Related

Autofilter Another Worksheet Data Based On Cell Value In Another Worksheet?

Aug 13, 2014

I have a 'Summary' worksheet which is shown as:

August
September
October

Example 1
1
4
5

The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.

Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.

The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved