I would like to have a Macro, which could find Formulas on ALL sheets and replacing them with Values (Special Paste).
Example: I have multiple sheets and on every sheet there are functions (In my case, =MAX). I would like that my Macro would simply find that function and automaticly replace it with a Value (I do not have time to Copy -> Special Paste 300 Functions)
I am trying to be a good programmer and not do a whole bunch of activate workbooks and worksheets. So I am 99% complete with my subroutine and stuck on 3 lines. I need to copy my entire pivot table from PvtDest (which is Superdatabase.xls sheets f2 pivot)
Set PvtDest = Workbooks(SSRname).Worksheets(CarrPivot)
PvtDest. Cells.Copy
PvtDest.Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
PvtDest.cells.copy works fine
PvtDest.Cells.select Fails due to (select method.range class failed
finally Selection.Paste special is supposed to paste on PvtDest but I have not been able to accomplish this.
I think I have seen copy paste special in the same command line is that the solution
I'm looking for a way that I could place a button on my workbook that would create a new document from the specified worksheets and convert the formulas to the values.
I have the following VBA code, which works nicely -
PHP For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
C.Offset(0, 5).FormulaR1C1 = "=IF((RIGHT(RC[-1],3)=""ago""),RC[-1],"""")"
Next C
What I want to do is Paste As Values to each of the cells in the above to convert the formula to a static value,. Is there a simple bit of code I can include in the above loop, instead of doing a Selection.Copy Selection.PasteValues etc over the range?
I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
Apply Macro Code To All Tabs / Sheets. My macro is only working for the first tab and not for all the others..Following is the code
Application.Run "TotalHrs"
Application.Calculation = xlCalculationManual
Application. ScreenUpdating = False
For Each wks In Worksheets
' Columns("I:I").Insert Shift:=xlToRight
Range("I4") = "Invoiced Amount"
Range("I5").FormulaArray = _
"=INDEX(VLookup!R2C2:R242C4,MATCH(RC[-3]&RC[-2],R5C6:R2500C6&R5C7:R2500C7,0),3)*R[3]C[-1]"
Range("I5").Copy Range("I6:I1000")
Columns("I:I").EntireColumn.AutoFit
Next wks
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
End Sub
Im not able to attach even the zipped file since it's a little larger than the norm.
is it possible to write a macro that will convert absolute values into negative based on criteria? Data gets downloaded from in house system which comes out as all absolute values, now i need the macro to covert absolute values to negative if the amount is either "Our Reciepts" or "Our Delivery"
Below is a small sample of data, real data is around 100 rows
Col DCol EOur Receipts1231Our Delivery1231Delivery Settlement1323
I have a table (column C5 to H20)
The table has values in each cell. Some cells have zero values and some have positive values.
Basically, I need to convert all positive (non zero) values to Negative values using VBA (i.e. convert 251 to -251).
I wrote a simple macro a few months ago and I got carried away and produced an .xla rather than a normal worksheet macro!
I dont need to use this macro as often anymore and another member of staff will be taking the process over so I was hoping to turn the .xla into a normal worksheet macro.
Unfortunately I am very confused by using xla's (at one point I had about 7 versions on my tools menu for some reason!!) and I cannot work out how you convert it!
I have two workbooks: master and student. I have one spreadsheet in each workbook. Both workbooks contains data in the same range.
master.xls data = B1:B10 (values are integers)
student.xls data = B1:B10 (values are integers)
I want to know how to update(add) the values in master.xls with the values in a closed workbook(student.xls). Basically if master("B3") = 5 and student("B3") = 1, it will update the value in master("B3") = 6.
how to convert a worksheet in a workbook to pdf using VB?
View 9 Replies View Relatedconvert all spreadsheet in a workbook to one pdf file. I use PrimoPDF to convert, then I only convert 1 sheet to PDF even that I have select all sheets. My be it is a better PDF converter for free you use or other ways to do it.
View 4 Replies View RelatedIt says Compiled Error: User-defined type not defined.
Code below
Sub Macro101()
Dim pp As PowerPoint.Application
Dim PPPres As PowerPoint.Presentation
Dim PPSlide As PowerPoint.Slide
[Code].....
I have a workbook with 40 sheets, I want to convert column A using Text to Columns I have recored the method as below
View 5 Replies View RelatedI need to copy a range of values (actually two ranges). The ranges are of fixed size. Le't say A2:D20 and E2:H20.
Both workbooks have the exact same layout, and they both have the same named worksheet (in this case it's called Entry). However the actual filename of the source workbook is unknown. I know numerous users have changed the filename of the xls file.
I want to instruct them to open the old and new workbook, and open a third workbook containing the copy macro, they run the macro and it copies the data.
How can I reference a known worksheet name but of an unknown workbook name esp when the source and destination share the worksheet name?
1- I dont know why but sometimes excel 2010 converts numbers to dates automatically in my workbook. I use this macro to solve the problem, but since last week it is not working. I get an error: "Method 'NumberFormat' of object 'Range' failed".
2- because it should work in all cells of the workbook, the macro must make changes only in the cells with absolute numbers (ex: 1223) but must not change if in the cell there is a date like 12-may-2012 (numbers with hyphens).
This is my function:
_____________________________
Sub PuxaDatas()
Dim sht As Worksheet
For Each sht In ActiveWorkbook.Sheets
[Code].....
=2*2 if this formula in A1 & it's showing result 4 , how this result means 4 show automatically in cell B1, i mean say that how convert formula result to values automaticallly.
View 1 Replies View RelatedI have some cells in Column I which are linked to the respective cells in Column J, i.e. I17 is linked to the J17, I21 has a link to J21. Now what I want is to convert every cell in column I which has a link to column J into values so that when I delete the column J, the values in column I should not change.
Simply selecting the entire column I, copying it and then pasting as values is not required, as there are some cells in column I which has some functions, and there are other cells which has links to other areas of worksheet and workbook. I just want to convert the cells in column I which has any link to column J. Is there a way to achieve this?
Is there some way to write a formula that would convert these time values (usually in a HH:MM:SS format) into a "minute" value (by rounding 30 seconds or more up to an additional "minute" as well as multiplying each hour by 60 minutes which will all be added to the MM or "minute" format for a grand total of how many minutes were involved with each transaction)?
When I try to re-format the data it changes to a date/time format which makes no sense.
Here is a sampling of some of the data I am trying to calculate:
:04:41
:39:15
:07:53
:28:45
:04:10
:20:20
:02:17
:16:47
:14:56
:38:59
:17:49
:32:49
:51:20
:07:02
:08:26
:07:57
01:29:08
:15:15
:11:25
:04:15
:30:37
:47:09
I have a product mix values as below. I want to convert the values into the % of total product mix.
CREATE TABLES LIKE BELOW?
----G---- ----H---- ----I---- --J--
4 Product A Product B Product C Total
5 32 73 125 230
6 14% 32% 54% 100%
I am conducting data analysis on a large data set. Missing values are coded as NA. Likewise, when I perform a calculation on a NA value, I receive the # DIV/0! error.
I want to know how I can automatically change NA to the integer 0 in a large data set so when I perform a calculation on the NA value, I will receive 0 instead of #DIV/0!.
I need to add a piece of code to a spreadsheet that will turn all formulae within into values. The number of tabs in the spreadsheet is likely to change over time but I want the code to apply to all the tabs - without needing to change it if a tab is added/ deleted.
View 3 Replies View RelatedI have a workbook that has a lot of formulas in it that reference material stored on my local computer.
I need a macro that will copy all 42 tabs in to a new workbook book without all formulas, but saving all the formats have made. This would save me from every other day coping and pasting manually each of the pages.
I am using the below code (i have combined different bits of code which i found on these forums) to open a new workbook, copy all the data in it and paste it into Sheet2 in the active workbook . Also, i want the data to be pasted on the next empty row as there is already data in Sheet2. The data that is being copied and pasted has the same format and it is going to be repeated many times.
The problem i am having is that it is not offsetting the data to the next empty row - i think it is a simple change but i can't seem to get there :s
Also, the code is currently selecting all of the data from the workbook that i open - is there a way i can select all of the data, excluding the first row (the first row contains the headings which i already have in Sheet2 in the active workbook).
[Code].....
Is there an easy way to convert ascii characters to their equivalent hex value, such as 0 = 30?
View 6 Replies View RelatedI have 2 columns - one that has numbers and the second that has text such as A, B, C, D,and E. I need to be able to convert the text into values such as 1,2,3,4,and 5 and then multiply with the first column that has value and display the resultant.
View 8 Replies View RelatedIs it possible to convert :
Nine Hundred Sixty Three Thousand Seven Hundred Eighty One
Eight Hundred Seventy Eight Thousand Eight Hundred Seventy Eight
Eight Hundred Twenty Two Thousand Seven Hundred Eighty Four
Eight Hundred Twenty Six Thousand One Hundred Eighty Nine
Nine Hundred Three Thousand Nine Hundred Six
to numeric...
EG:
963781
878878
872784
903906
I need to convert levels to numerical values and then: Firstly, add together two vlookup values THEN divide by 2 to get an average AND THEN see if this average AND a second, individual lookup value are above a specified another value, which may be different. IF all these criteria are set, return, "yes" if either the first or second, or both criteria are not met then "no"
Or put it another way. if lookup values A+B/2>"5" AND C>"3" then "yes", Else "no"
Lookup chart:
P11
P22
P33
P44
P55
P66
1c7
1b9
1a11...............
I am copying the value in a cell to another sheet's cell. I want to convert the formulas on the second sheet to reflect their value. I do this all the time within cells by using Past Special and Values however it doesn't give me that option within the Text Box
View 2 Replies View RelatedI am trying to find a way to search for specific cell formulas (not the values they produce). For example, how could I search an Excel tab for a cell containing "= sum()" ? I want to ignore all other formulas and values. I then want to replace this formula only with its value.
View 4 Replies View Related