Auto Convert To Values
Aug 16, 2013=2*2 if this formula in A1 & it's showing result 4 , how this result means 4 show automatically in cell B1, i mean say that how convert formula result to values automaticallly.
View 1 Replies=2*2 if this formula in A1 & it's showing result 4 , how this result means 4 show automatically in cell B1, i mean say that how convert formula result to values automaticallly.
View 1 RepliesHow to convert number/text to text/number?
example
a=1
b=3
c=5
Let's say
1) column A1 value is "35", any formula/macro can auto convert to "bc" at B1?
2) column A1 value is "ab", any formula/macro can auto convert to "13" at B1?
is it possible to write a macro that will convert absolute values into negative based on criteria? Data gets downloaded from in house system which comes out as all absolute values, now i need the macro to covert absolute values to negative if the amount is either "Our Reciepts" or "Our Delivery"
Below is a small sample of data, real data is around 100 rows
Col DCol EOur Receipts1231Our Delivery1231Delivery Settlement1323
I have a table (column C5 to H20)
The table has values in each cell. Some cells have zero values and some have positive values.
Basically, I need to convert all positive (non zero) values to Negative values using VBA (i.e. convert 251 to -251).
I have some cells in Column I which are linked to the respective cells in Column J, i.e. I17 is linked to the J17, I21 has a link to J21. Now what I want is to convert every cell in column I which has a link to column J into values so that when I delete the column J, the values in column I should not change.
Simply selecting the entire column I, copying it and then pasting as values is not required, as there are some cells in column I which has some functions, and there are other cells which has links to other areas of worksheet and workbook. I just want to convert the cells in column I which has any link to column J. Is there a way to achieve this?
Is there some way to write a formula that would convert these time values (usually in a HH:MM:SS format) into a "minute" value (by rounding 30 seconds or more up to an additional "minute" as well as multiplying each hour by 60 minutes which will all be added to the MM or "minute" format for a grand total of how many minutes were involved with each transaction)?
When I try to re-format the data it changes to a date/time format which makes no sense.
Here is a sampling of some of the data I am trying to calculate:
:04:41
:39:15
:07:53
:28:45
:04:10
:20:20
:02:17
:16:47
:14:56
:38:59
:17:49
:32:49
:51:20
:07:02
:08:26
:07:57
01:29:08
:15:15
:11:25
:04:15
:30:37
:47:09
I have a product mix values as below. I want to convert the values into the % of total product mix.
CREATE TABLES LIKE BELOW?
----G---- ----H---- ----I---- --J--
4 Product A Product B Product C Total
5 32 73 125 230
6 14% 32% 54% 100%
I am conducting data analysis on a large data set. Missing values are coded as NA. Likewise, when I perform a calculation on a NA value, I receive the # DIV/0! error.
I want to know how I can automatically change NA to the integer 0 in a large data set so when I perform a calculation on the NA value, I will receive 0 instead of #DIV/0!.
I need to add a piece of code to a spreadsheet that will turn all formulae within into values. The number of tabs in the spreadsheet is likely to change over time but I want the code to apply to all the tabs - without needing to change it if a tab is added/ deleted.
View 3 Replies View RelatedIs there an easy way to convert ascii characters to their equivalent hex value, such as 0 = 30?
View 6 Replies View RelatedI have 2 columns - one that has numbers and the second that has text such as A, B, C, D,and E. I need to be able to convert the text into values such as 1,2,3,4,and 5 and then multiply with the first column that has value and display the resultant.
View 8 Replies View RelatedIs it possible to convert :
Nine Hundred Sixty Three Thousand Seven Hundred Eighty One
Eight Hundred Seventy Eight Thousand Eight Hundred Seventy Eight
Eight Hundred Twenty Two Thousand Seven Hundred Eighty Four
Eight Hundred Twenty Six Thousand One Hundred Eighty Nine
Nine Hundred Three Thousand Nine Hundred Six
to numeric...
EG:
963781
878878
872784
903906
I need to convert levels to numerical values and then: Firstly, add together two vlookup values THEN divide by 2 to get an average AND THEN see if this average AND a second, individual lookup value are above a specified another value, which may be different. IF all these criteria are set, return, "yes" if either the first or second, or both criteria are not met then "no"
Or put it another way. if lookup values A+B/2>"5" AND C>"3" then "yes", Else "no"
Lookup chart:
P11
P22
P33
P44
P55
P66
1c7
1b9
1a11...............
I am copying the value in a cell to another sheet's cell. I want to convert the formulas on the second sheet to reflect their value. I do this all the time within cells by using Past Special and Values however it doesn't give me that option within the Text Box
View 2 Replies View RelatedI am trying to find a way to search for specific cell formulas (not the values they produce). For example, how could I search an Excel tab for a cell containing "= sum()" ? I want to ignore all other formulas and values. I then want to replace this formula only with its value.
View 4 Replies View RelatedI am trying to be a good programmer and not do a whole bunch of activate workbooks and worksheets. So I am 99% complete with my subroutine and stuck on 3 lines. I need to copy my entire pivot table from PvtDest (which is Superdatabase.xls sheets f2 pivot)
Set PvtDest = Workbooks(SSRname).Worksheets(CarrPivot)
PvtDest. Cells.Copy
PvtDest.Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
PvtDest.cells.copy works fine
PvtDest.Cells.select Fails due to (select method.range class failed
finally Selection.Paste special is supposed to paste on PvtDest but I have not been able to accomplish this.
I think I have seen copy paste special in the same command line is that the solution
I would like to have a Macro, which could find Formulas on ALL sheets and replacing them with Values (Special Paste).
Example: I have multiple sheets and on every sheet there are functions (In my case, =MAX). I would like that my Macro would simply find that function and automaticly replace it with a Value (I do not have time to Copy -> Special Paste 300 Functions)
I have a list of numbers with decimals : such as
742111.37
703102.4
641771.52
652689.31
741202.92
I would like to convert the Numeric values to Text
Result :
Seven Hundred Forty Two Thousand One Hundred and Eleven and Thirty Seven .....
..........
..........
and so on....
I have a table in the format
User Application 1 Application 2 Application 3 ... Application N
ABC aaa bbb ccc ddd
XYZ bbb yyy
LMN ccc ddd
I want to convert it into :
User Application
ABC aaa
ABC bbb
ABC ccc
ABC ddd
XYZ bbb
XYZ yyy
LMN ccc
LMN ddd
I was wondering how to make the following: get a list where each Number from the "source file.xls" is assigned to a Group like in "final list.xls" through "conversion table.xls".
In the "source file.xls" we have apart from Number, the Series and Category columns. I need to compare both Series and Category to the same from "conversion table.xls" and in the third workbook output the matching Number from "source file.xls" and Group from "conversion table.xls" according to matching algorithm.
I am attaching the files:
source file.xls
conversion table.xls
final list.xls
All three should be different workbooks and the first two will need to be closed. Also very important is the source file can have many names so it would be great to implement an open dialog box to load the data from "source file.xls". All data is in text format....
I want to convert multiple sections that contains formulas to values. Usually i did this by coping range of cells, and paste as Values. But now i have multilple sections and excel doesn't allowe me to copy multiple sections. (i can not use clipboard, because there are more than 2.5 k rows)
View 7 Replies View RelatedI'm looking for a way that I could place a button on my workbook that would create a new document from the specified worksheets and convert the formulas to the values.
I have a macro that changes user selection from formulas to values:
Dim vCol As Variant
vCol = Application.InputBox("Select Column", Type:=2)
If vCol = False Or vCol = "" Then Exit Sub
Set UserRange = Range(vCol & "9:" & vCol & "35")
UserRange.Value = UserRange.Value
End Sub
I have several workbooks that use this macro, and the workbooks can include several sheets.
Is there's an easy way to change the macro so the user selection is changed in all sheets in the workbook. E.g. if the user selection is column H, the formula is changed to values in all sheets in the workbook.
I want to create a Macro to convert the formula results from a filtered data range to values. I thought to use a simple code to do the copy - paste to value
Sub QuickSaveValue()
Dim r As Range, c As Range
Set r = Selection
For Each c In r.SpecialCells(xlCellTypeFormulas)
c.Copy
c.PasteSpecial xlPasteValues
Next c
Application.CutCopyMode = False
End Sub
But is not good because the range is much to large and i need just a filtered part to be changed and i tried like this:
Sub QuickSaveTV()................
creating functions in excel and would like to hire someone who can assist me in creating the following functions: Column A (For Numerical Values Less Than or = to 100): Column B Value should be (+10)
Example 1: If a numerical value of 90 is placed in Column A then Column B Numerical Auto Value should be 80+10 (190). Example 2: If a numerical value of 35 is placed in column A then Column B Numerical Auto Value should be 35+10 (45) and so on. Another important point is that if the values in column A are copy and pasted Column B should automatically discharge the values visibly as the examples stated above is this possible? If not i'll need to have this done.
Also there are other numerical values that must be added in Column A (basically for every increase in numerical value of 100 there are to be different numerical plus factors in accordance to Column A). Column A (For Numerical Values greater than 100 but less than 200): Column B Value should be (+15).......
I have the following VBA code, which works nicely -
PHP For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
C.Offset(0, 5).FormulaR1C1 = "=IF((RIGHT(RC[-1],3)=""ago""),RC[-1],"""")"
Next C
What I want to do is Paste As Values to each of the cells in the above to convert the formula to a static value,. Is there a simple bit of code I can include in the above loop, instead of doing a Selection.Copy Selection.PasteValues etc over the range?
Code:
Sub Select_All_Sheets_And_Export()
Dim wsWorksheet As Worksheet, wbNew As Workbook
Worksheets.Select
Cells.Select
Selection.Copy
[Code] ........
I have come up with the above code to select all sheets in my workbook and convert to values and then split and save each worksheet as its worksheet name in the same directory.
I have a document passed to me that includes information pulled from an internal system.
I want to use some basic formulas to show Totals, averages etc.
However, the SUM function does not work on the data provided unless I select the cell (As if to edit the text) and the press enter.
Is there a quicker way of selecting all of the cells in Column A for example and performing this function on mass, rather than selecting each cell individually.
I have attahced a similar sample copy - My SUM formula is show in cell B15.
I'm trying to create a spreadsheet to update daily, whenever our market intelligence arrives by email. I'm not trying to write a macro which can select a range of cells (G:L) relative to the date in Column B, which represents the value in cell P6. In other words:Read the value of cell P6 Find that value in column B (e.g. B646)highlight the cells in columns G through to L on that row (e.g. select G646:L646) I am then aiming to paste the values in that range of cells, so that those stay in the spreadsheet and are not lost when the next lot of figures comes in the following day.
Range("G646:L646").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveWindow.SmallScroll Down:=12
Application.CutCopyMode = False
ActiveWorkbook.Save
but that's obviously a static range, rather than looking up the date first.
I am trying to create a macro to automatically copy and paste values from column M into column N.
Column M is a Concatenated formula, and I want people to be able to copy the result easily without having to do any copy+"paste values" themselves.
So I have the following:
Sub CopyFormulaResults()
Application.OnTime Now() + TimeValue("00:00:01"), "CopyFormulaResults"
Range("M3:M1000").Select
[Code]....
However, the macro only runs when I run the macro, not automatically every second like I want it too.