Copy A Filtered Range To Notepad
Feb 29, 2008
I would like to copy a column from a filtered range to notepad. The main steps of this method are these:
1.Copy the original range to a blank range(range1) as text and filter
2.Select the required rows and copy
3.paste the values to A1000 (range2)
4.open notepad and set the filename by a cell value
5.paste the range to notepad
6.delete range1 and range2
Unfortunately, I use macros and vb not so often, so I'm not expert in it.
I have found two useful code, but I don't know how can I combine them.
For step 1
Sub Copy_Filter_Range() ...
View 4 Replies
ADVERTISEMENT
Nov 29, 2006
i have issue copying data from a filtered sheet to another sheet. i only want to copy visible cells....ie when there is no data or data after filtering i have: selection. currentregion.copy. this dosent work as when there is no data it still copies my column headings in row A1 across to row r1 and then to next sheet. how do i write code that will only pick up the filtered data starting in first cell...ie after filtering this could be any number. for example i only want to copy data if row 2 and downwards has data
View 2 Replies
View Related
Apr 3, 2008
how I can copy top 15 visible values from a specific column in an autofilter, without actually setting the "top 10" values in the macro for that column. So somehow copy the first 15 cells. The code should fit somehwere in this I guess:
Sheets("A").Select
Columns(5).Cells.SpecialCells(xlCellTypeVisible).Copy
Sheets("B").Select
Range("M6").Select
ActiveSheet.Paste
Could I put an extra variable by the .paste so it only pastes 15 values. Perhaps behind the copy??? I've tried to put .Cells(15) but that doesn't work either, which is a pitty. I'm clueless here, and couldn't find anything regarding this (without using fixed ranges, ...)
View 3 Replies
View Related
Apr 22, 2009
This code was provided this forum. It is so close to what I need. The only difference is that I need the copied lines inserted.
Actually, I needed Destination to pick EndT2 (on Sheet2), then select one row down from it and then insert what was copied... -R-
Sub CopyFilteredRangeNoHeaders()
Dim rTable As Range
Set rTable = Sheet1. AutoFilter.Range
Set rTable = rTable.Resize(rTable.Rows.Count - 1)
'Move new range down to start at the fisrt data row.
Set rTable = rTable.Offset(1)
rTable.Copy Destination:=Range("EndT2")
View 9 Replies
View Related
May 9, 2008
I'm trying to do is copy filtered data. I select my column and copy it, filtered, no problem. But then my code bugs out when it tries to copy the next column.
If Sheets("CT Summary"). Cells(4, 6).Value = "P1264" Then
Sheets("Mam Roll-up").Activate
'Copy CEID's.
Range("L4:L134").Select
Selection.SpecialCells (xlCellTypeVisible)
"Selection.SpecialCells (xlCellTypeVisible)" works in the first block, but bugs out on the second.
View 3 Replies
View Related
Jan 8, 2008
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies
View Related
Dec 13, 2006
I need code to copy rows from a filtered list on one worksheet and insert at a specific point in another worksheet.
What I would do if doing it manually is to "select the visible cells, copy, go to the other worksheet, select the point I wanted to insert the data and select Insert Copied Cells".
When I try to record this with the macro recorder I don't see the option Insert Copied Cells.
View 9 Replies
View Related
Dec 3, 2009
I have two macros. The first one gets a file name and worksheet name. Then it calls the second macro which opens up notepad (with the specified file name) and pastes the information in excel. The problem that occurs is when I call the second macro more then once in a row from the first macro. It runs great the first time but then problems occur as it tries to run the macro again. (Some times it just closes my excel file with prompting me to save). Calling any of the files works on an individual basis (I've tried for all three). I've erased some of the code due to privacy issues but path location is identical for all three files. Here is the code.
View 6 Replies
View Related
Jan 2, 2009
Using Excel 2003, if I sum the following numbers :
-423,418.15
-144,349.60
-38,959.80
-23,122.30
-82.90
31,225.79
2,375.00
10,160.83
15,416.67
22,145.83
11,850.00.....................
I get a result of -2.30556906899437E-10!! I have copied them into notepad, and then copied them back in to clear all formatting, but I am still getting this bizarre result? I have tried them in different spreedsheets, I have manually inputted them.
View 4 Replies
View Related
Aug 13, 2008
I want to copy data of two columns ( say col A and B ) from excel to NOTEPAD. When it is copied, the values from the two columns are appearing to be separated by a gap of seven(7) spaces in the NOTEPAD. But I want the values will appear with a single space between , when copied. How to do this? A NOTEPAD file is enclosed.
View 2 Replies
View Related
Jan 6, 2009
need vb code for copying some set of cells to notepad file with some file name
View 9 Replies
View Related
Jul 21, 2009
i was trying something like this...but it doesn't quite work.
can anyone point me in a direction that works better?
View 2 Replies
View Related
Nov 6, 2009
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
View 9 Replies
View Related
Sep 25, 2009
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Jul 3, 2014
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies
View Related
Aug 1, 2014
I need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies
View Related
May 23, 2007
I have the code below which filters and copies columns. My issues is that this filters and copies all data. I would like to filter all this data from another column before running the macro. And for this code to only then filter and copy the already 'manually' filtered data. Does anyone know how I might go about doing this?
Sub sortdescript2()
Dim rngData As Range
For Each rngData In Range("E4:CR258").Columns
rngData.AutoFilter Field:=1, Criteria1:="<>"
rngData.Copy
rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues
rngData.AutoFilter
Next
View 4 Replies
View Related
Aug 19, 2013
Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
View 1 Replies
View Related
Jul 6, 2014
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I
1 First I filter only Yellow cells
2 then I copy that Filtered cells
3 after that copying that filter cells I did Paste in same rows in J and K column
View 5 Replies
View Related
Jul 7, 2009
I need the VB code to copy just a portion of a filtered list. I have completed the code to sort and filter the list. I'm having a problem determining how to define the region needed. I have searched the forums and found a few helpful threads but nothing specific. Most show selecting all the columns of the filtered list.
My list is in columns A:AA and begins in row 4 (header row). In my test data, there are 5,900+ records and filtered list is approximately 4,900 records. Since I have sorted the data, the portion of the filtered data I need will always begin in cell D5, be columns D:K, and be the visible rows.
View 4 Replies
View Related
Oct 28, 2011
I have a large worksheet, with approx 15 columns of data, which is a straight data dump from a very old sales reporting system - so the whole thing is a mess.
As such, I auto filter the report, and select certain criteria from various columns, which leaves me with just the data I wish to see on screen.
What I then need to do is copy across any visible values (after this filtering) from Column C (missing out row 1, which is headings), into the same row in Column E.
At the moment, this is a manual process, because if you highlight the entire selection of codes in column C, then paste in Column E, due to the filtering, the paste puts the values in all the wrong places.
Is there a way around this - or a macro which will copy the values to the same row but in Column E?
View 4 Replies
View Related
Oct 2, 2008
I have 5 fields which contain 200 rows of information, I'd like to filter field 1 and have the filtered data copied to K2 of the same worksheet.
View 9 Replies
View Related
Oct 16, 2007
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria:
1. xyz
2. acb
3. hij
this is what I have for the autofilter:
Range("A1:I1").AutoFilter Field:=3, Criteria1:="=xyz"
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
View 7 Replies
View Related
Apr 11, 2008
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A")
If Cell.Value <> Empty Then
i = i + 1
b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value
Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b
End If
Next Cell
View 9 Replies
View Related
Dec 31, 2013
I am trying to copy and paste values from one column to another on the same sheet
E.g Column A
A1-Red
A2-Blue
A3-Green
A4-Red
If i filter to red and copy cells A1 and A4 and paste into column B, instead of pasting it into cells B1 and B4 it pastes it into B1 and B2...
How do i get it to paste on the same row?
My sheet im working with has thousands of rows, some need to be pasted, others need to be left as they are
View 3 Replies
View Related
Nov 10, 2013
I have a spreadsheet with 5000 records and i would like to have a macro that can be able to filter by date and copy it to a new workbook.
i have a data validation that indicates dates and once i have selected a date for example "10/10/2013" and all data with that date will copy and paste as value to a new workbook .
View 4 Replies
View Related
Feb 12, 2014
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
Sub GetBarrelQualifiers()
'
' GetBarrelQualifiers
[code]....
View 5 Replies
View Related
Aug 20, 2006
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A
row 1 ABCDE
row 2 FGHI
row 3 Party Name:Abcd
row 4 JKLM
row 5 nopq
row 6 STUV
row 7 Party Name:ryz
row 8 Party Name:mno
row 9 XYZ
I want the results as below:
Column A Column B Column C Column D
row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno
View 9 Replies
View Related
Sep 2, 2006
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales
First I filter the data range for " Total Sales"
Paste the results with header row to wsDetails
Details - Details
Then filter the data again for "N"
I would like to paste these results to wsDetails w/o the header
Option Explicit
Sub comp_pl_ytd_Totals()
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim wsTotals As Worksheet
Dim wsDetails As Worksheet
Dim wsExtract As Worksheet
Dim rngData As Range
Dim rngCrit As Range
Dim rngDest As Range
Dim arrCrit
Dim myRange As Range
Dim C As Range
Dim lngrows As Long
Dim strFormula As String
Dim rngCase As Range
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.Calculation = xlCalculationManual
End With................
View 4 Replies
View Related
