Macro To Copy Filtered Values
Oct 28, 2011
I have a large worksheet, with approx 15 columns of data, which is a straight data dump from a very old sales reporting system - so the whole thing is a mess.
As such, I auto filter the report, and select certain criteria from various columns, which leaves me with just the data I wish to see on screen.
What I then need to do is copy across any visible values (after this filtering) from Column C (missing out row 1, which is headings), into the same row in Column E.
At the moment, this is a manual process, because if you highlight the entire selection of codes in column C, then paste in Column E, due to the filtering, the paste puts the values in all the wrong places.
Is there a way around this - or a macro which will copy the values to the same row but in Column E?
View 4 Replies
ADVERTISEMENT
Apr 10, 2014
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
View 5 Replies
View Related
Apr 22, 2009
This code was provided this forum. It is so close to what I need. The only difference is that I need the copied lines inserted.
Actually, I needed Destination to pick EndT2 (on Sheet2), then select one row down from it and then insert what was copied... -R-
Sub CopyFilteredRangeNoHeaders()
Dim rTable As Range
Set rTable = Sheet1. AutoFilter.Range
Set rTable = rTable.Resize(rTable.Rows.Count - 1)
'Move new range down to start at the fisrt data row.
Set rTable = rTable.Offset(1)
rTable.Copy Destination:=Range("EndT2")
View 9 Replies
View Related
Aug 3, 2013
my requirement is as follows. I have a school data sheet(data sheet) and i have to filter data based on each school id.I need to pass school id in a different excel sheet(input sheet). So if the school id matches then i have to copy the entire data for tht school and move to to a new sheet.
Input sheet
schoolid
211
321
Data Sheet
Emp No Surname last name schoolid
1 marian chin 211
3 luke mar 211
5 uyure tgt d 321
7 fdsfd fdsfsd 333
so whn the macro is run it should filter for 211 and 321 and move these three rows from data sheet to new output sheet.
View 1 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Sep 25, 2009
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
View 9 Replies
View Related
Nov 29, 2006
i have issue copying data from a filtered sheet to another sheet. i only want to copy visible cells....ie when there is no data or data after filtering i have: selection. currentregion.copy. this dosent work as when there is no data it still copies my column headings in row A1 across to row r1 and then to next sheet. how do i write code that will only pick up the filtered data starting in first cell...ie after filtering this could be any number. for example i only want to copy data if row 2 and downwards has data
View 2 Replies
View Related
May 23, 2007
I have the code below which filters and copies columns. My issues is that this filters and copies all data. I would like to filter all this data from another column before running the macro. And for this code to only then filter and copy the already 'manually' filtered data. Does anyone know how I might go about doing this?
Sub sortdescript2()
Dim rngData As Range
For Each rngData In Range("E4:CR258").Columns
rngData.AutoFilter Field:=1, Criteria1:="<>"
rngData.Copy
rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues
rngData.AutoFilter
Next
View 4 Replies
View Related
Apr 3, 2008
how I can copy top 15 visible values from a specific column in an autofilter, without actually setting the "top 10" values in the macro for that column. So somehow copy the first 15 cells. The code should fit somehwere in this I guess:
Sheets("A").Select
Columns(5).Cells.SpecialCells(xlCellTypeVisible).Copy
Sheets("B").Select
Range("M6").Select
ActiveSheet.Paste
Could I put an extra variable by the .paste so it only pastes 15 values. Perhaps behind the copy??? I've tried to put .Cells(15) but that doesn't work either, which is a pitty. I'm clueless here, and couldn't find anything regarding this (without using fixed ranges, ...)
View 3 Replies
View Related
Aug 19, 2013
Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
View 1 Replies
View Related
Jan 28, 2013
I have Sheet1 and Sheet2. On Sheet2 I have some filtered items.
Now, is it possible to link the filtered items to Sheet1, e.g. =IF(Sheet2!B1=IsVisible;Sheet2!B1;"")
I do not want to make a copy/paste/vba turnaround.
View 2 Replies
View Related
Mar 8, 2013
I would like to paste values from a list into a different list - different tab - that is already filtered. When I try to do so, the values will paste into the hidden cells - being filtered -.
Find attached an easy example of my problem. The list I am talking about is around 1,000 lines.
Pasting Example.xlsx
To explain my example, I filter sheet 1 so only item I need are showing - B, D and F in this case - and I would like to paste the value of Alarm 3 from the Sheet 2 to the corresponding line in sheet 1. But it does not really work - line F is not filled - and when I un-filter values are filled into Item C and D.
View 3 Replies
View Related
Feb 22, 2012
Based on filtered data I want to produce a result for the Average trade gain.
Lets say I have 100 rows of data, and based on filtered settings the rows reduce to 5 rows of results.
Of those results I want to find an average of all the positive values (trading profits) and ignore the negative ones.
$2000
$1500
-$700
$4000
-$1000
The answer should be (2000+1500+4000)/3
The need for filtering makes this problematic. I am inclined to use SUBTOTAL as it applies to filters rows only, but I can't see how to use an IF statement within it.
In addition to this I would also love to know how to subtotal all positive values without averaging.
View 5 Replies
View Related
Aug 16, 2012
How do I count values in filtered cells?
After I filter for values in Columns(C), I want to count values in Columns(D). When I filter data, I noticed I can manually select the filtered cell range (i.e. Columns(D)) and at the bottom in the Status Bar it will give the correct count. If I cursor over that status bar count it will display "Number of selected cells that contain data." However, I cannot seem to figure out how to get vba to select just the filtered cells selected in that range and count them only and correctly... it instead counts all the values to the last cell in the filtered range.
For example
1) let's say I have a Range("D1:D120') and there are 20 cells containing data in that range.
2) I filter Columns(C) resulting in 10 rows and the rows are 2, 3, 20, 22, 27, 30, 37, 41, 56, 60. Of those 10 rows, there are only 2 cells containing data (let's say cell D20 and cell D37).
3) Now in reality, cells in Range("D2:D60") actually contain 10 cells with values, but since we filtered on columns(C) values... Columns(D) only shows 2 values.
...... here is my problem:
4) If I manually select the filtered range, the status bar "Count" value will correctly sum as "2." But if I code VBA or even "Record a macro code" (obviously incorreclty on my part), it will return a value of 10 for the range of D2:D60 and not on the visible filtered value which is "2."
View 6 Replies
View Related
Mar 18, 2007
I need to calculate a subtotal like value on the last row of a filtered region.
e.g.
description year sum
name1 3 yrs ago 200
name1 2 yrs ago 230
name1 last year 250
name1 forecast 220
name1 forecast value 1400
name2 3 yrs ago 200
name2 2 yrs ago 230
name2 last year 250
name2 forecast 220
name2 forecast value 1400
How to put a value on the last row of filtered column. let's say that above list is very little in comparison with the real list. so, let's say that i look up for name36, witch begins on row (36*5) -> 5 is the values of the year column; after autofilter with "name1" the very left column with row index become blue and show rows from 1 to 5, than, next row is the last non-empty row.
View 9 Replies
View Related
Jul 6, 2014
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I
1 First I filter only Yellow cells
2 then I copy that Filtered cells
3 after that copying that filter cells I did Paste in same rows in J and K column
View 5 Replies
View Related
Jul 7, 2009
I need the VB code to copy just a portion of a filtered list. I have completed the code to sort and filter the list. I'm having a problem determining how to define the region needed. I have searched the forums and found a few helpful threads but nothing specific. Most show selecting all the columns of the filtered list.
My list is in columns A:AA and begins in row 4 (header row). In my test data, there are 5,900+ records and filtered list is approximately 4,900 records. Since I have sorted the data, the portion of the filtered data I need will always begin in cell D5, be columns D:K, and be the visible rows.
View 4 Replies
View Related
Oct 2, 2008
I have 5 fields which contain 200 rows of information, I'd like to filter field 1 and have the filtered data copied to K2 of the same worksheet.
View 9 Replies
View Related
Oct 16, 2007
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria:
1. xyz
2. acb
3. hij
this is what I have for the autofilter:
Range("A1:I1").AutoFilter Field:=3, Criteria1:="=xyz"
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
View 7 Replies
View Related
Feb 29, 2008
I would like to copy a column from a filtered range to notepad. The main steps of this method are these:
1.Copy the original range to a blank range(range1) as text and filter
2.Select the required rows and copy
3.paste the values to A1000 (range2)
4.open notepad and set the filename by a cell value
5.paste the range to notepad
6.delete range1 and range2
Unfortunately, I use macros and vb not so often, so I'm not expert in it.
I have found two useful code, but I don't know how can I combine them.
For step 1
Sub Copy_Filter_Range() ...
View 4 Replies
View Related
Apr 11, 2008
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A")
If Cell.Value <> Empty Then
i = i + 1
b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value
Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b
End If
Next Cell
View 9 Replies
View Related
May 9, 2008
I'm trying to do is copy filtered data. I select my column and copy it, filtered, no problem. But then my code bugs out when it tries to copy the next column.
If Sheets("CT Summary"). Cells(4, 6).Value = "P1264" Then
Sheets("Mam Roll-up").Activate
'Copy CEID's.
Range("L4:L134").Select
Selection.SpecialCells (xlCellTypeVisible)
"Selection.SpecialCells (xlCellTypeVisible)" works in the first block, but bugs out on the second.
View 3 Replies
View Related
Dec 29, 2008
I need to count the number of unique names from a column of filtered text. On the attached example D5 is where I need the value, the current array I have does not work when the filter is applied by changing the product in drop box. I need to have a count of the unique account names from column A.
View 3 Replies
View Related
May 29, 2008
I want to create a Macro to convert the formula results from a filtered data range to values. I thought to use a simple code to do the copy - paste to value
Sub QuickSaveValue()
Dim r As Range, c As Range
Set r = Selection
For Each c In r.SpecialCells(xlCellTypeFormulas)
c.Copy
c.PasteSpecial xlPasteValues
Next c
Application.CutCopyMode = False
End Sub
But is not good because the range is much to large and i need just a filtered part to be changed and i tried like this:
Sub QuickSaveTV()................
View 4 Replies
View Related
Dec 31, 2013
I am trying to copy and paste values from one column to another on the same sheet
E.g Column A
A1-Red
A2-Blue
A3-Green
A4-Red
If i filter to red and copy cells A1 and A4 and paste into column B, instead of pasting it into cells B1 and B4 it pastes it into B1 and B2...
How do i get it to paste on the same row?
My sheet im working with has thousands of rows, some need to be pasted, others need to be left as they are
View 3 Replies
View Related
Nov 10, 2013
I have a spreadsheet with 5000 records and i would like to have a macro that can be able to filter by date and copy it to a new workbook.
i have a data validation that indicates dates and once i have selected a date for example "10/10/2013" and all data with that date will copy and paste as value to a new workbook .
View 4 Replies
View Related
Feb 12, 2014
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
Sub GetBarrelQualifiers()
'
' GetBarrelQualifiers
[code]....
View 5 Replies
View Related
Aug 20, 2006
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A
row 1 ABCDE
row 2 FGHI
row 3 Party Name:Abcd
row 4 JKLM
row 5 nopq
row 6 STUV
row 7 Party Name:ryz
row 8 Party Name:mno
row 9 XYZ
I want the results as below:
Column A Column B Column C Column D
row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno
View 9 Replies
View Related
Sep 2, 2006
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales
First I filter the data range for " Total Sales"
Paste the results with header row to wsDetails
Details - Details
Then filter the data again for "N"
I would like to paste these results to wsDetails w/o the header
Option Explicit
Sub comp_pl_ytd_Totals()
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim wsTotals As Worksheet
Dim wsDetails As Worksheet
Dim wsExtract As Worksheet
Dim rngData As Range
Dim rngCrit As Range
Dim rngDest As Range
Dim arrCrit
Dim myRange As Range
Dim C As Range
Dim lngrows As Long
Dim strFormula As String
Dim rngCase As Range
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.Calculation = xlCalculationManual
End With................
View 4 Replies
View Related
Dec 13, 2006
I need code to copy rows from a filtered list on one worksheet and insert at a specific point in another worksheet.
What I would do if doing it manually is to "select the visible cells, copy, go to the other worksheet, select the point I wanted to insert the data and select Insert Copied Cells".
When I try to record this with the macro recorder I don't see the option Insert Copied Cells.
View 9 Replies
View Related
