Copying Range Of Cells From One Workbook To Another
Oct 30, 2009
I'm looking for an algorithm that does the following:
1. Open one-by-one a number of excel workbooks in a directory and copy their .UsedRange
(i.e. all sheet content in each of the workbooks).
2. Paste append one-by-one each of the workbooks .UsedRange of data into a master workbook that is already open (i.e. active workbook).
Note that the source workbooks and target master workbook contain the same format of data. So a simple copy and paste of the .UsedRange is apt.
Basically I need each .UsedRange of an opened workbook to be appended to the data from previously opened workbook in the master workbook already opened.........
View 9 Replies
ADVERTISEMENT
Jun 7, 2006
I have created a macro that copys pivot table from one Workbook to new workbook. Problems I am encountering are print selecting from source workbook are not copied to new workbook.
Dim AmountofColumns As Long, AmountofRows As Long
Dim ColumnCount As Long, RowCount As Long
Dim ThisWorkbookName As String, ActiveWorkbookName As String, ActiveSheetName As String
Public Sub CreateGroups()
Application. ScreenUpdating = False
Sheets("Preferences").Select
ThisWorkbookName = ActiveWorkbook. Name
AmountofColumns = Range("A1").End(xlToRight).Column
For ColumnCount = 2 To AmountofColumns......................
View 6 Replies
View Related
Mar 17, 2014
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
View 2 Replies
View Related
Nov 1, 2012
I have a workbook named Br2012. I would like a macro to copy the range names to BR12013.
View 2 Replies
View Related
Apr 26, 2007
I have a range of cells (L1:Q1) I want to copy from a worksheet called Email from one workbook and copy it into an already created and saved workbook called 'TDocuments.xls' located in the root of my C: drive.
Thing is I need to paste this range into the first blank row of TDocuments.xls, so it will need to find that first and then paste the values (without formulas) into the TDocuments.xls and save it.
View 6 Replies
View Related
Feb 17, 2009
I just need to know how to reference another workbook in order to copy values from cells on it to my own version of it. It's 18 pages, and I need to pull certain columns cell values from certain sheets (these columns are all fixed, no fancy statements required). I'm unfamiliar with the structure required to refer to another workbook. All I need to do is say "This workbook-Sheet1!D2:D20 = Workbook"Feb"-Sheet1!D2:D20", and so on, throughout the sheets.
I did look for solutions to this, but all of the answers are mixed in with complex statements for other simultaneous calculations... I find myself unable to pick out the small piece which I need from the mash of code I'm unfamiliar with.
View 5 Replies
View Related
Dec 10, 2013
I have to fill out forms for work and some of the info is the same and isd put on seperate sheets. On sheet one I have cells with the information that is the same on the different forms on shhets 2 and 3 i have the forms.
here is what i have having problems doing.
12-47136569
13x129077
How can i do a formula that copies the above values exactually to a cell ona another sheet
View 1 Replies
View Related
Jul 30, 2006
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
View 6 Replies
View Related
Jul 29, 2014
i am trying to copy few cells with data, and i have something like this:
Range("A3:AO" & Format(intRowCounter, "###")).Select
So this will copy all data withing those cells range, however, i want to copy only data from specific columns, ie, from column A3, and from K3:J
View 1 Replies
View Related
Nov 25, 2008
Sheet 1 to look into Sheet 2
> Find a certain string "name1" > if string is name, copy succeeding columns if not goes and checks another cell till it finds it.
> Then copied columns will be evaluated (sum, divide, etc)
this loops through all rows.
next problem i am seeing is what if it finds 2-5 names how can i combined all the cells copied?
View 9 Replies
View Related
Apr 12, 2007
I am creating a macro needed for many worksheets. I am trying to paste a range that will be different within each worksheet. I started the macro off by locating the correct cell to start the copy from. I want to copy 11 columns across and 32 rows down from the cell I selected.
View 7 Replies
View Related
Feb 1, 2014
I am trying to capture data for statistical analysis, but have hit a snag. As shown in attached sheet I have each day for the year broken down into hour time slots into which data will be added. As I will need to come up with a number of similar sheets in the future I was wondering if there is a way to automate through vba, a quick way to copy down the hour slots for each day, 365 times, rather than the laborious task of copy and paste manually.
View 5 Replies
View Related
Apr 22, 2014
Why the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
View 3 Replies
View Related
Nov 5, 2012
I'm using Excel 2003. I've got two different .XLS files, each with multiple sheets.
I'm trying to create a macro which will copy a range of cells from one sheet on one .XLS file (which is closed) to a specific place on a specific sheet on the current .XLS file (which is open).
So for the sake of argument:
I've got two Excel files: C:ApplesOldFile.xls and C:OrangesNewFile.xls
OldFile.xls is closed -- NewFile.xls is open and in front of me.
I'm trying to copy the data in ranges B6:C41 and F6:F41 from Sheet2 in OldFile.xls to the same ranges on Sheet6 in NewFile.xls. There are no formulas in these cells -- just data (numbers).
I keep getting error messages, failures to copy to clipboard, etc.
View 3 Replies
View Related
Feb 11, 2010
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View 2 Replies
View Related
Oct 30, 2012
I have a spreadsheet that allows users to paste set data from a PDF Image (using OCR) straight into Excel and then use the MID function to split the data accordingly.
Unfortunately, the OCR isn’t too intuitive and gets it wrong sometimes.
So to counter this, in another sheet (in the same workbook) I have a manual input section, and a simple macro button that pastes this data into the same fields where the OCR text would be, so that the main sheet works exactly the same way as before.
The problem is, and most likely due to the simplicity of the sheet, if a combination of OCR pasting and manual inputting is used, when I hit the paste button, it over rides the OCR data with blank cells
In the link below I have shown what is currently happening (1, 2, 3), and an example of what I would actually like it to do (4, 5, 6).
Example - Online Spreadsheets - EditGrid
So, in the 2nd scenario, I would like “5” to recognise that the respective cells in “4” already contain data and fill them ‘Grey’. This I have already achieved with basic conditional formatting.
However, I need to take it 1 step further and say that if the parent sheets cell (Auto OCR) contains data, as well as filling cells (in sheet Manual) lock these cells off and prevent the end user from adding data and/ or being copied over to the parent sheet.
Is this possible?
The result then being the parent sheet with both OCR text and copied text from the manual input sheet.
Both sheets are protected anyway and only allow for user input in certain areas, so is it even possible to apply further protection once the sheet is locked already?
View 1 Replies
View Related
Mar 21, 2014
I have a range of weekly data that I need to copy into another workbook, paste it below the data that already exists there and then delete the data from the original workbook. I would love to do this with vba but after hours of searching on how to do this my brain is frazzled.
I have 50 workbooks that I need to import weekly into one master sheet (Master.xlsm) but they need to be done individually after the weekly data has been checked. The master sheet will therefore have existing data and the new data needs to be appended at the bottom. Also column A will be blank in both workbooks so to find the last used row it will need to look in column B.
The number of rows in the weekly sheet will also vary rather than be a fixed range so I guess the last used row will also need to be found there too.
The attached file is a cut down version of my working file showing where the data starts on Row 14, I won't need to copy the headings.
Example file 21.03.xlsm
View 4 Replies
View Related
May 30, 2014
Trying to create a new workbook from another open workbook, then copying all the sheets that aren't called "Summary" to that new open workbook and then saving it. I get a subscript error on this line:
[Code]....
View 3 Replies
View Related
Jun 16, 2014
All i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
View 2 Replies
View Related
May 16, 2014
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
[Code].....
View 4 Replies
View Related
May 27, 2014
Please see attached files.
Book1.xlsx
test.xlsm
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
View 2 Replies
View Related
Mar 6, 2014
So I basically have a template workbook that the code is stored in. I need it to pull an entire row if Column C in workbook "rawdata" contains specific text, in this case "PRCH - Purchase".I have never had to do anything like this before, it has always been working in the same workbook. It's failing at the 'mp = ...' line every time. There might be other errors in the code too, I just cannot resolve the first one!
[Code] .....
View 5 Replies
View Related
Sep 18, 2006
i came up with this..
Sub Copy_To_New_Workbook()
Application. ScreenUpdating = False
Dim strFileName As String
strFileName = Application. GetOpenFilename(filefilter:="Excel Files (*.xls), *.xls", Title:="Please select the excel file to be copied")
View 9 Replies
View Related
Dec 12, 2007
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies
View Related
Apr 6, 2009
I have previously tried to save the whole original workbook with the following
ActiveWorkbook.SaveAs Filename:="C:UsersPhilDocumentsMy Excel DocumentsRostersIndividual Rosters" & StaffLastName & " " & StaffFirstName & " - Roster commencing " & Format(DateSerial(Range("X11").Value, Range("V11").Value, Range("T11").Value), "dd mmm yyyy") & ".xlsm
but receive a run-time error message:
Run-time error '1004': Microsoft Office Excel cannot access the file
My first request for help is how is the code wrong and how can it be corrected?
Secondly, instead of saving the whole workbook, is it possible to save just a given range of cells as a new workbook, using the format above to give it a personalised filename?
View 9 Replies
View Related
May 12, 2007
I've been trying to learn how to write code in VBA. I've been learning for about 2 weeks now (trying to learn it for work) and heres my problem. I have a macro that will create a pivot table from raw data that I input. From this pivot table, I want to go to the last row in the pivot table (the row that takes grand totals of each column of data). I want to write a macro that will take those values (located in a workbook called AR age sorting) and place them in cells in another workbook (called AR aging analysis). Basically cells D6-D9 in workbook "AR aging analysis" should equal the values of the last row in my pivot table in workbook "AR age sorting" (last cell with data in columns J-M). I thought this would be easy but I've run into some issues. Heres the code I use:
Sub aging_summary()
Dim Sheet1 As Worksheet
Dim Sheet2 As Worksheet
Set Sheet1 = Sheets("AR age sorting")
Set Sheet2 = Sheets("AR aging analysis")
For n = 10 To 13
For M = 6 To 9
Sheet2.Range(Cells(M, 4), Cells(M, 4)). _
Value = Sheet1.Range(Cells(n, 1), Cells(n, 1)). _
End(x1Down).Value
Next M
Next n
End Sub
I don't want it to copy and paste the values since I just need the value, not all the extra formatting and what not that is incorporated in the pivot table. When I try to run this I get an error message, saying that there is an application-defined or user-defined error.
View 2 Replies
View Related
Jan 29, 2014
I want to create a macro that will find a text string called "Season Average" in the entire workbook and delete a range of cells above it 4 cells longs starting right above the text and then going left.
Example is if "Season Average" is in cell D11, than I want the cells D10, C10, B10 & A10 Deleted and the cells to shift up
This happens throughout the entire workbook and multiple times on each work sheet in different spots not consistently same cells.
View 9 Replies
View Related
Nov 11, 2008
I am trying to set up a template for my MD to use to calculate budgets and have so far encountered a number of problems most of which i have overcome thanks to help from this forum.
What i am trying to do is have a 'Selection sheet' which contains a number of drop down boxes from which the user can choose several different options.
Based on what they have choosen on this sheet a second sheet 'initial budget' is populated.
What i am trying to do is a formula similar to the following. but i can't seem to get it to work.
View 15 Replies
View Related
May 14, 2009
I am trying to automate the process of filling out monthly reports and I have run into a problem I just cannot seem to work around.
These reports contain both weekly and monthly information, but because most months do not end on a friday or begin on a monday I have to have a couple of the week reports as partial weeks (e.g. April ended on a Thursday and so that week's report has both April 27-30 and May 1). When the first week of the next month's report runs I would like it to prompt the user to locate the last month's report, open the report, find week 5 of that report and copy the relevant data into the current month's report. (Hopefully that explanation is sufficient)
What I am running into is, after prompting for and opening the past month's report I am trying to select the Range A137:I232 on Sheet5 but instead the previous month's report just opens to wherever it was when it was last saved and won't select any ranges I tell it to, it just selects the range it was on last time it was saved. It will then copy that range and paste it into the Current Month's report.
below is my code ...
View 8 Replies
View Related
Aug 9, 2013
I have "wbThis" as the original workbook to be pasted to and "wbTarget" as the workbook that is being opened and copied from. (2 different workbooks). I have written a code for the user to chose the workbook (wbTarget) to open and copying the data from (the getopenfilename). I want to paste these values to the "wbThis" worksheet. The code is running, however it does not copy paste the values from one workbook to another, and it is not giving me an error either.
Code:
Private Sub CommandButton1_Click()
Dim wbTarget As Workbook
Dim wbThis As Workbook
[Code].....
View 2 Replies
View Related
