I have names in A1, A2, A3 and A4 and in cells B1:C4 I have atendance for am and pm.What I need is it to count if someone was in on a day. So if B1 or C1 or both contains "in" then the subtotal will be 1 and added for each row, so it shows how many are in whether it be for 1/2 or a full day
View 2 RepliesI noticed that when I use countif to count cells with certain text value it works but up to some point when it returns way too much then (when there are generally more values matching I think). I don't know what is the cause ..formatting? some function limit ?
View 3 Replies View RelatedI am trying to combine the text values of several formulas in addition to adding some text (punctuation) in between.
Here is the data that I am trying to combine
C14: 2013
C15: Period 6
C16: Week 1
In Cell C13, I would like to have this value returned: "2013 - Period 6, Week 1"
Is there such a way to do this?
I am trying to create a spread sheet where I have different columns. The columns consist of name and dollar amount. Names may occur more than once. I would like to scan the column with the names and copy the different names to another column. Once that is done, I am hoping to copy the value or sum of all values associated with that name to the column beside it. I am going to have a long list of names with different values and I would like to sort them and add up those values. I have attached an example of what I am hoping to achieve. I am hoping my 'Sum of Values' is actually summed, I left it longhand for explanation sake.
Name
Value
Name
Sum of values
x
4
x
4+2
[Code] ....
The times listed in column A are formatted as text.
When trying to add them using a simple SUM formula (=SUM(A2:A5)), a false result of 0 is returned.
How can we add text values correctly?
Solution:
Use the SUM and TIMEVALUE functions as shown in the following Array formula:
{=SUM(TIMEVALUE(A2:A5))}
To apply Array formula:
Select the cell, press
I have an excel file with some data in it. I have two columns with one of four words in it. For simplicity I'll call them RED, GREEN, BLUE, and Yellow. A few columns over I have columns "Same" "Good" and "Bad". I'm trying to figure out a way to get excel to put a 1 in the appropriate column, if cell A1 is Red I need excel to look at the word in cell B2 and put a 1 in the "same" column if A1 and B1 are the same word. If the word in B2 is Yellow I need excel to put a 1 in the "Good" column. If the word in B1 is GREEN or BLUE I need it to put a 1 in the bad column. The tricky part is each of the four words RED, GREEN, BLUE, and Yellow have a different set of words that will be called "good" or "bad". So if the word in cell A1 if Green for example it will have a different set of good and bad color words.
So it seems I need four different functions depending on what word is in A1. In the column next to these lists of words I have the date which I'll need to use to give me the sums of same, good, and bad for each day. But first things first. I think I need to use a combination of IF functions and MATCH function, but I can't figure out anything that works. Below is what I'm hoping it will look like when I've got the right formulas.
First column
Second column
Date
Same
Good
Bad
[Code]....
I am trying to extract values from a text string and add them up in Excel 2007. So far i have been successful in extracting the value out of the text string like this - =MID(I6,AD6,3) where AD6 holds the position number in the text string to start from. So it's working OK for one row but i need to do the same thing on multiple rows where the text string can be in different columns and I'd like it to automatically pick up the non-blank cell.
each row only has one column with text in it and the value i need to extract is always after "$". this is a working spreadsheet so the text string could move from column to column over time and I'd like my formula to be able to detect which column to read from. I then need to add up all the values from each row.
I am using the formula below to count the occurences of relevant text strings (names) in a cell that can contain many separate strings. It works great. "References!$F$2:$F$34" contains my list of names and the formula returns how many occurences there are in each cell.
What i'd like to do know is work in a date criteria. Each name has an associated relevant date attached to it as does each cell that I am looking for these names in.
So...in english what Id like to do is alter my formula so that when it finds a text string that exists in "References!$F$2:$F$34", it then compares the associated date in "References!$G$2:$G$34" with the date associated with N3 which happens to be O3.
SUMPRODUCT(COUNTIF(N3,"*"&References!$F$2:$F$34&"*"))
I trying to convert the following formula (I, II, III) and add criteria of Name and Date to the count values of “c”
CURRENT FORMULA
I: “=COUNTIF(C2:C3100,"
I am trying to add numbers from cells if it IsNumeric and for some reason in column K the macro doesnt recognize numbers after row 14?
The range column is "E4:E"
Search criteria is the letter "R" in column "E" Then using OffSet, I go thru other columns and process data. Most of the macro works except for column K after row 14?
i have a problem adding cells every 5th cell for example i have
=SUMPRODUCT((C10:C67)*(MOD(ROW(C10:C67),5)=0))
this adds every 5th row in this range and it does it right as long as there is no text in the cells in between
it works fine when it looks like this
1
1
1
1
1
1
1
but it does not work when it looks like this
1
1
text
1
1
1
when this happens it appears as #VALUE, meaning an error but i don't understand why if i'm just telling it to look at every 5th row and those specific rows have no text in them
i have a spreadsheet with text in between the cells that need to be added so i need a formula that only adds up the cells with numbers on it, to be specific the numbers are either ones or zeroes.....
How do you use COUNTIF to check certain cells in a row that have a value of
zero.
cell C4, cell G4, cell K4, cell O4, cell S4, ....etc
I am trying to calculate the number of times I have values in a column that fall between 00:10 and 00:14 (10 and 14 minutes). Every formula I have tried either gives me 0 value or ######. Range is e3:e102 and times are being calculated by subtracting 2 adjacent cells with actual times in them.
View 3 Replies View RelatedColumn A is Department
Column B is EmployeeName
Column C is Hours Worked
Column D is WorkWeek
All columns will contain duplicates, though no particurlar row combination would be a duplicate. How can I count the number of unique values in Column B when the value in Column A = "MyDepartment"?
I have a list of 100 values in Column A of the attached spreadsheet Sample.xls. I need to count the number of values between a certain percentage including both positive and negative values. Example: I need to count all values that are between 0 and +5% and 0 to -5%.
View 2 Replies View RelatedI have a spreadsheet that contains a list of dates: What I need is a formula that will count the number of cells that hava a date more than 6 months old. I also would like the field automated so I don't have to change the date manually every day.
=COUNTIF(S5:S593,"<2012/06/18") This formula will give the correct read out, but I must change the date manually.
My attempts at adding a =today() command in place of the date result in 0 being the result (not correct)
This is what I have tried: =COUNTIF(S5:S593,"<"=TODAY()-"183")
I have some text I wish to add some content to the front and back of it. i.e. the text in the cell is "214.212.134.62" and I want to add "http://" to the front of it and ":9999" to the back to it, so it looks like "http://214.212.134.62:9999" in a different cell.
View 3 Replies View RelatedBasically, I have data that have the titles:
Year Max allowed A B C D E F
1999 55 45 23 60 53 53 57
2000 59 45 23 60 53 53 57
2001 51 45 23 60 53 53 57
And data for several years. Each year has a particular maximum allowed exceptions per process (A, B, C etc)
I basically would like =countif(columns that contain A through F, for values greater than Max allowed for that specific yeat)
Is there a way that I can get the countif to recognize the value under max allowed as the "tripping" value for the row A through F?
So I would get a value of 2 for row 1999, 1 for 2000 and 4 for 2001
Is there a way to do a COUNTIF on just partial text?
I know how to count how many cells in a column contain the text "cars" for example, but how would i write a formula that include cells with other text as well?
For example if 55 cells have "cars" as a value and 20 cells have "fast cars" as a value
I would want the formula to count 75.
Basically, it needs to count how many cells cars appears in, in a specific column, regardless of whether its alone in the cell or part of a sentence.
I am using countif to count a range of cells D10:D34 returning a PB as a result of a formula in Col D.
The countif formula (=Countif(D10:D34,"PB") is in cell D39 and the result in D39 populates a cell in another worksheet. The formula in Col D also returns =PB results. I have placed another Countif formula in cell D41 (result to also populate a cell in another worksheet) to count all =PB's using (=Countif(D10:D34,"=PB"). The second countif doesn't work correctly. It counts all PB's and =PB's.
How would I write a formula to Countif or Sumif a cell contains a string of text? ie if I wanted to look for "Andrew" in cells that contained the text "AndrewKent", "Andrew Kent", "Kent Andrew" etc how would I do it?
I was wondering if it's possible to use a countif so that the condition can be a range of values also? For example, A1 = 14.12.08, A2 = 15.12.08 and A3 = 16.12.08
So I can have a countif that looks like: Countif(B1:B300, A1:A3). It doesn't work when I try it, but was wondering if there's a way to achieve the same result? So if B1:B300 contained any of the values in A1:A3 it would count the amount of times they appear in the B range.
How can I use COUNTIF to count the values in a range which are greater than 0?
I put =COUNTIF(B2:B100000)>0 but that didn't work?
(I'm using XL 2007 hence the range greater than 65000 rows. But I don't
think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain
fart.)
I have a data set of students results and I have been using countif to pickup similar grades eg, C1, C2 and C3 all as C. However I need to subtotal filter against teachers and the sumproduct won't let me use C* as a wildcard to pick up the three types of C. How I can subtoal countif multiple criteria.
View 3 Replies View RelatedI'm trying to run a countif formula in a separate worksheet searching for a long text string. The text string is long enough that I can't copy the entire string into the Ctrl F Find function.
=COUNTIF('Data Month 1'!C:C,F4)
F4 = text string put together using the values of multiple adjascent cells. Total characters are over 26.
In the attached sheet I have a list of names with hours overtime hours worked. I want a small table on the sheet which looks up when "name x more" occurs. In cell C14 for example I want it to count the number of times "Mark More" occurs in column I, but the name may change in C13, so I want to automate this - so the countif in cell C14 will reference whatever text is in C13.
View 2 Replies View RelatedI have a drop down list called Status including Testable and Not Testable
A1 = Testable
A2 = Testable
A3 = Not Testable
A4 = =COUNTIF(A1:A3,"Testable")
Gives me 0... i don't get it. Should show 2 no?
I have a question about using COUNTIFS. I have a countifs statement in one of my workbooks. When it does not count anything instead of it displaying 0, I would like it to read No Scans.
=COUNTIFS(DATA!$C:$C**(this is an account number row)**,A5**(A5 is the account number)**,DATA!$K:$K,**(This is an event column and I want everything with the code I to count)**"I"**(this is the event letter I am seeking for it to count)**
=COUNTIFS(DATA!$C:$C,A5,DATA!$K:$K,"I")
I have a problem, in a table, the cell H5 has this formula. .=IF(E5=20, COUNTIF(G5,">=10y")+COUNTIF(G5,">=12y") +COUNTIF(G5,">=14y")+COUNTIF(G5,">=16y")+COUNTIF(G 5,">=18y")). every time that G5 has a value >= "10y"or "12y" until "18y", H5 should add 1 or 2 until 5. when I fill out C5, with an answer value in G5 of + 18y, H5 = 5, everything works fine. writing 02/08/1988 in C5 the result in H5 is 5, but when I change the value of C5 for 02/08/1999, H5 should be "0" but it continues with the value 5.
View 7 Replies View RelatedI am working with an Excel 2010 workbook that has two worksheets in it. What I am trying to accomplish is I want the second worksheet to scan the first worksheet for a student's name, and count all of the instances that the student has a score less than a certain threshold (we'll say "5" for this example). I have tried using various combinations of vlookup and countif functions, but have not had much success. I did get it to a point where it worked, but only for the first instance of that student's name; it wouldn't continue searching the first worksheet for any other instances.
I have attached a sample workbook as a reference : Sheet1.xlsx‎