How can I countif on a row/range
I tried this but this wont work. All i want to countif there are duplicate rows. This formula will be copied down
=countif($A$1:$A$11&$B$1:$B$11&$C$1:$C$11,A1&B1&C1)
I have a lot of seperate data that I'm trying to graph via a macro. I have one macro with a Do Until/Do While loops that runs before I import the data that creates and seperates the data into dynamic named ranges. My goal was to create a macro that graphs the different ranges using another Do Until/Do While loop. You'll see below that I have the ranges concatenated inside the loop so it does just that, graphs each set of data in each worksheet by running the same macro. Below is the code for the specific graphing macro and at the same spot, where the series values are set using the concatenated range name, the error message, "Unable to set the Values property of the series class." I have no idea what is wrong, but my guess is it's probably something simple.
Sub Graph()
Dim Counter As Integer
Dim CounterEQ As Integer
Dim Title As String
Counter = 200
Do Until Worksheets("IndustryEmployment").Cells(1, Head) <> ""
Counter = Counter - 1
Loop
CounterEQ = Counter
Do While Worksheets("IndustryEmployment").Cells(1, Explode) <> ""
GoingTo = Worksheets("IndustryEmployment").Cells(1, Explode)
Charts.Add
ActiveChart.ChartType = xlLine
ActiveChart.SetSourceData Source:=Sheets("IndustryEmployment").Range( _
"U15:U16"), PlotBy:=xlColumns.......................
I want to create a series of VLOOKUP commands with different lookup tables whose names are concatenated from two different pieces. Here's what I'm trying to do:
VLOOKUP(x,LUTWK01,y,false)
VLOOKUP(x,LUTWK02,y,false)
VLOOKUP(x,LUTWK03,y,false)
LUTWK01, etc., are named ranges. I have the text "WK01", "WK02", "WK03" stored in other places, and would like to be able to concatenate "LUT" and the particular week (e.g., "WK01"). The formula that I've created, which isn't working is:
VLOOKUP(x,CONCATENATE("LUT",A1),y, false) where cell A1=WK01.
When I pull out just the CONCATENATE portion, it resolves to LUTWK01, but apparently this is not recognized as a range name. Any idea as to how I make the VLOOKUP formula recognize a concatenated range name? Or is there a better way to do this?
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
- Column D includes dates.
- Column E includes text, either "Yes" or "No".
I want Excel to count all cells in Column D between 1-Jan-2009 to 31-Jan-2009 + any cells that say "Yes" from Column E on the same row.
Is ther any way around not being able to do this - I read that if u make the ranges an array it shoul work - Shift, Control, Enter - or something but I can get it to work. I was hoping to use copuntif for this :-
COUNTIF(F33:F39,M33:M39,T33:T39,AA33:AA39,AH33:AH39,AO33:AO39,F67:F73,M67:M73,T67:T73,AA67:AA73,AH67 :AH73,"b")
How do i create a formula for countif with range name
I did create a formula =COUNTIF(C2:C868,"NS") but it show 0
NS range name contain working shift
NS
0:00 - 9:30
7:00 - 16:30
7:30 - 17:00
7:45 - 17:15
8:00 - 17:30
8:15 - 17:45
8:30 - 18:00
I have a column with multiple data entries ( dates, amounts, percentages, etc).
From these I want to count how many dates are after the selected date.
But I am unable to pickup date cells selectively.
i.e. counif ( {A1, A6, A11, A16, A21, A26}, >=1-Jan-2009)
But the function is giving error as it only accepts ranges.
I can use countif(A1:A26, >=1-Jan-2009)
But the problem is some numerical values are also in the same range ( as the numerical format of dates) - so I am unable to use it.
I have column A fill with dates and column B with customer code. I'm looking to count the number of time the customer code (column B) is repeating but ONLY in previous year. Meaning that the count range must be adapt for each customer code. Will a countifs is able to work with this request?
View 6 Replies View RelatedI want to count a range of percentage how many items fall under the % range below:-
from 0% to +- 10% (equal or +-10%)
from +-11% to +-20%
from +- 21% to +-30%
from more than +- 31%
I am trying to solve a a problem that I am having.
I have a list of projects in one column and start dates in a different column.
I want to create a dashboard that breaks down projects by month, quarter and year to date.
I have tried various formulas centered around CountIf. Bottom line is I want to review a column of dates and determine how many projects started last month, etc.....
I want to count all cells over 1000 and then I want to count all cells over 990, but less than 999.
These are the formulas I am using
=COUNTIF(CN3:CU65,">=1000")
=COUNTIF(CN3:CU65,">=990")
In this formula, the over 990 also counts the ones over 1000 and I only want them to count 990 to 999.
I am trying to use the COUNTIF function but over a selectable range. in other words instead of a fixed range like =COUNTIF(A1:A11,"=yes") I want to be able to choose the range Axx:Axx selected by drop down menus.
View 3 Replies View RelatedI have a CountIFS formula for a cell range for a project for work
Code: =COUNTIFS($C$75:$C$1999,A71,$G$75:$G$1999,">=-1",$G$75:$G$1999,"
#1
1
2
3
4
5
6
7
8
#2
Red
Yellow
Green
Blue
Violet
[Code] .....
I am trying to determine how many times a value occurs in each quartile in a data set, with the range of my quartiles changing for each row.
Above is a simplified sample of the data I am working with. What I would like to do is calculate the length of a quartile for each row, then determine whether "Red" is in the 1st, 2nd, 3rd, or 4th quartile
Right now I have two output tables. The first is a "Quartile" table, which for each row counts the number of values entered, divides by four, multiplies by the appropriate quartile and rounds down. For this I use the function
=rounddown(counta(range)/4*(quartile))
For Q1 in this dataset, that is =rounddown(counta($B2:$I2)/4*(1))
Then I have a table which calculates whether "Red" occurs in each quartile, with references to the cell values in my quartile table. My formula for Q1 here is
=countif(index(row#2,1,match(Q1 value,$row#1,0)):Index(row#2,1,match(Q1 value,$row#1,0)),"Red".
The actual formula (can be used if pasting table values into excel) is:
=countif(index($B2,$I2,1,match(Q1,$B$1:$I$1,0)):index($B2:$I2,1,match(Q1,$B$1:$I$1,0)),"Red")
Where Q1 equals my rounddown formula noted above, returning "1" in this case. For subsequent quartiles, I change my reference in the Match formula to start with the previous quartile +1, and end with the current quartile.
I want a conditional format change to happen when certain criteria is met.
I have a conditional formula in column F
Let's say F173
If the value in A173 value is found anywhere above cell A173, then make a blue box surrounding cell F173.
I want to be able to copy this conditional format down column F
When I apply the countif function to a named data range, it evaluates to #VALUE. I'm trying to count the number of entries in the range (Belgium.Data) that are strictly greater than zero, to calculate a y.t.d. average that won't be biased by incomplete data. The range-name is well-defined - the arithmetic functions like sum, sumproduct etc work and evaluate correctly across the range, but countif always refuses to return a value. I've also tried
"=COUNT(Belgium.Data>0)"
to no avail, as well as all the following:
"=COUNTIF(Belgium.Data,">"&0)";
"=COUNTIF(Belgium.Data,">0")";
"=SUM(Belgium.Data>0)".
Even the last didn't evaluate, even though "=SUM(Belgium.Data)" evaluates correctly. I can't seem to use the actual cell-references either, since the range is non-contiguous - I miss out every 11th cell to compute an average on the last 11 cells - and Excel doesn't seem to like the comma ("union") operator, insisting the 2nd component of the union is COUNTIF's "criteria" argument.
I am trying to take a large spreadsheet with 2000+ rows of data each with its on unique date associated with each row (its a dump of invoices that need to get paid). I need to count how many invoices are each of the seperate 52 weeks of the last year using I believe a Countif function. My problem is I cannot seem to get the criteria written correctly. For example I want to count out of the 2000+ rows of data, how many invoice dates fall between say, Jan 1 and Jan 7. I would think it would be as easy as using the Countif function and then writing the criteria as a forumula to count invoices that have a date that is greater than or equal to Jan 1 BUT less than or equal to Jan 7. It is that precise formula that is giving me much frustration.
I have a similar Sumif forumula problem as I need to total the $ of the invoices but I think if I get the criteria to work for Countif it will work for Sumif.
I am using the CountIf function (in column B) to count the number of events called "EVENT1" from columns C (Time) and D (Events), but the range needs to include all cells which, at the current B row, have the same value as in row A. I want to use a dynamic range so that I can account for the repeats.
Column A
Column B
Column C
Column D
Time
Count
Time
Events
1
=Countif(,"EVENT1")
1
event0
[Code] .....
I have a start date column and column for status. Status is either "in-progress" or "complete". I want to count the number of "complete" items that fall within a specific date range. I have tried countif but I can only seem to get a count of all items that fall between the date range. I do not want a pivot table for this.
View 3 Replies View RelatedIn column A I have a list if places that can contain duplicates ie
Manchester
Birmingham
London
Birmingham
London
Manchester
Manchester
London
In column B through to D a list of statements to which there are multiple answers i.e.
Yes / Maybe / No
What I'd like to know is how many 'Yes' answers are in the data range for column B:D in Manchester
I've used a countifs but have to result to multiple countifs adding each column together which is fine for 3 columns but not when there are 50!
I want to determine the range in the countif function automatically and relating to a date (i.e. today).
In the attached sheet there are two employees who worked during a certain period, a day worked is 1
Then I would like to count how many days each employee has worked up until today, counting the 1's in the row of that employee until today.
I want a cell to countif the sum of two adjacent cells is greater than the number in another cell so for instance
Count if f101+g101 is greater than the number stored in cell u12, repeat this for cells f102+g102, right down to f50100+g50100.
I have a column of values in "£"s and i need to count how many entries there are within a range. I have been able to do it with text but not money values with £ signs!!
View 2 Replies View RelatedI have 2 columns, one containing a piece of data and one containing dates. I want to count how many times the data is in the first column, based on a specific date range in the 2nd column. I have attached a sample SSF with a better explanation inside it.
View 3 Replies View RelatedI have a range of numbers between 1 and 25 in 50 cells.
How could I use the countif function to look at that range of numbers for
values between 5 and 10 and count those values that meet the criteria of
between 5 and 10?
Or if there is another function to use, let me know.
I have a data set that alters each week which means at the moment I have to update the ranges manually each time. I would like to use a dynamic range and think I need to use the Offset and CountIf functions. Both the start and end of the ranges are dynamic. The range is based on grouping the numbers in Column E (LocNo)
What I would like to do or think the way to achieve this is by:
First looking at Column E
Count how many cells are equal to criteria. (CountIf)
offset 5 columns left from the first cell that meets the criteria (Offset -5)
offset X rows down based on how many cells meet the criteria (Offset X)
I've include a spreadsheet spread sheet which 'should' help illustrate the problem showing the ranges I would like and how the data changes each week.
how can i use countif or sumproduct or sumif ..etc to calculate how many occurrence in a specify date and time .
I am trying to put together a formula to allow me to count the number of occurances dates within a month in a column.
So far I have tried
=COUNTIF(F4:F500,DATE(2011,10,9)) but it only lets me search for the 9th of October (when I want to count all dates specified in october.
Is there any other way I can search (count) a range for dates in October 2011 only?
I need to add all cells within multiple ranges where the characters "A", "S" and "D" occur.
=SUMPRODUCT(COUNTIF(INDIRECT({"C22:C25","C28:C32"}),{"A","S","D"}))
