Counting Rows Efficiently?

Apr 14, 2014

I am extracting data from an electronic medical record (EMR) which has many search limitations. I am able to export data into a CSV file (attached) to perform some calculations (All the patient data is fake btw). I am trying to find the number of appointments for each patient within a specific date parameter. For each patient, one appointment appears on one row.

pt appt sample.png

What I want to do is count the number of rows (appointments) for each patient in an efficient manner. Right now I've just used the COUNTA function, but don't want to repeat this for every patient, due to the way that the workbook is set up. The data is all from the CSV file from the EMR; the only column I've added is the "Appointments since 2013" column.

The patient data is fake because I am using a test server for the EMR. However out in a real doctor's office, there will be over 2000 patients with possibly up to about 100+ appointments.

Not sure if there's formula out there that would make my task a lot easier and more efficient, or I need to play around with the columns to set it up differently.

View 6 Replies


ADVERTISEMENT

Efficiently Deal With #N/A Error

Apr 8, 2008

In the attached work book I have 2 sheets named, Data Entering page-plan and Varaince Summary-in hours.

Data Entering page-plan - is used to enter data
Varaince Summary-in hours. – is used to retrieve data

In ‘Varaince Summary-in hours. sheet in Cell A6 I have a drop down to select the job nos, according to the job no selected date, position no, and milling hours are filtered and displayed. I have written a index/match formula in G6 and have dragged it downwards since I don’t know how many positions would be fetched in each job no selected. Is there any way not to display N/A in unused cells in Column G each time a job no is selected ?( embedding the function in a IF using ISNA or ISERROR would be inefficient as I feel since this sheet is going to house lot of data of about 30 sections, I have shown only one section here)

View 4 Replies View Related

Editing VBA In A Number Of Files Efficiently

May 17, 2014

I have a large number of files that are structurally the same - only the data and the file names are different. I want to insert some code into all of them.

I don't yet know how to open all the VBA pieces together at one time for editing. Is that possible? Otherwise all I know how to do is a manual, file by file, process.

View 9 Replies View Related

Coding The Page Setup Efficiently

Mar 7, 2008

I've managed to clean up my code removing all of the selecting to get the macro to run faster but it seems to slow down when it gets to the page setup. Is it because of the ActiveSheet? Is there a better way to code the following?

View 10 Replies View Related

Structuring Code To Efficiently Process Data

Aug 23, 2009

I have a two workbooks, one which is a daily schedule and the other is a yearly summary. The worksheet in the yearly summary uses a date in the first column and the daily sheets each have a date on them. I've isolated my data in the daily schedule and I've retrieved the date in its numerical equivilant. I have data that is 6 cells wide by "x" amount deep on any given day. Essentially, I schedule different things to be made and each row has that designation, process, dimensions, quantity, etc.

I want to test the contents of the first cell in the array, copy the pertinent data, switch to the proper worksheet, and paste it into the line where it goes. I believe I need to check a few cells to narrow down exactly which group of cells on which sheet they would be copied to.

I am not trained at all as far as programming goes, but I've been practicing for a few years now. What I am just going to start doing is testing the cells in the rows in the array of data and trying to divide it out that way. This just seems like the long way around.

View 2 Replies View Related

How To Efficiently Build Criteria Page For Each Of DCOUNTA Cells

Jul 8, 2014

The report that I am trying to build relies on DCOUNTA formulas.

This report has 200 lines and 200 columns approximately. Each of these cells would be a DCOUNTA formula. I have a separate sheet, 'Criteria', where I intend to describe all of my criteria for the DCOUNTA formulas.

My problem is that for each DCOUNTA cell in my report, I have to create 2 rows and 5 columns worth of criteria information... so, for 40,000 cells to populate, I need to create a huge sheet of criteria.

So, while I could do the above, and it would take me some time, more efficient and elegant way to spend my time in order to get this report display DCOUNTA formulas?

For more context, I am trying to present information for 100 individual salespeople, monthly and year to date. For each cell, I need to tell DCOUNTA that the date needs to be comprised in the current period (2 columns), what the name of the salespeople is, and what the nature of the information is, which could be more than 2 additional columns.

I can to some degree autofill most of this, with some OFFSET magic, but its still feels like an ugly way to achieve my objective.

View 9 Replies View Related

Counting Rows And Inserting Blank Rows

Dec 31, 2008

I have an excel sheet that has the A column populated with many different things.

I'm not sure how possible it is, but I'm trying to group everything up by 7s and putting a space in between the groups.

So...

ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7

Would turn into

ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7

HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7

QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7

View 9 Replies View Related

Counting Visible Rows Only?

Jan 10, 2013

I need to insert a formula to count only the visible rows in a database. I currently have =row()-6 etc. but when I hide certain rows they are included in the count. What formula can I use to ignore the hidden rows and only show the live rows?

View 10 Replies View Related

Counting Only The Visible Rows

Nov 4, 2008

How can I count the no. of rows of a selection which has some hidden rows...I want to count only the visible rows

View 5 Replies View Related

Counting Rows In A Table

Feb 6, 2013

I have a big problem. My table looks like

column A: 1, blank, blank, 2, 3
column B: 3, 3, blank, 5, 1
column C: blank, 3, blank, 5, 1
column D: 3, 3, blank, 5, 1
column E: 3, 3, 2, 5, 1

My problem is how to count rows where columns A,B,C,D are empty, and in column E is a number.

View 6 Replies View Related

Counting Highlighted Rows ...

Sep 18, 2007

I have a spreadsheet which I have highlighted certain rows based on a certain criteria (I have manually highlted the rows). I was wondering if there is a way to "count" the number of rows that have been highligted?

View 9 Replies View Related

Macro For Counting No. Of Rows

Feb 23, 2009

I have an excel sheet with 5 columns and nearly 8000 rows. The 1st column consists of some values which goes as:

Column 1 Row 1: A
Column 1 Row 2: A
Column 1 Row 3: A
Column 1 Row 4: A
Column 1 Row 5: B
Column 1 Row 6: B
Column 1 Row 7: C
.
.
.
.
.
.
so on upto 8000 rows.

I need a macro which can run through column A, count how many A's are there, how many B's are there, how many C's are there and so on. The result if provided on another sheet or tab would be wonderful and should be like:

A-4
B-3
C-1

where A,B,C are values and 4,3,1 are the no. of times they are present in columns.

View 9 Replies View Related

Counting Rows With If Function

May 18, 2006

I want to count rows, in which are any content, text or number. The problem is, that I am not talking about just one column, but let's say ten. In each of the column of one row, there could be a cell with content. If there is content, the tool should count it ONCE (thus, doesn't matter if all columns are full or just one).

View 6 Replies View Related

Counting Visible Rows

Nov 23, 2006

I have two macros that hide or unhide rows. Now I need a way to count only the non-hidden rows. The total needs to be visible in each visible cell of a single column (presently column AW).

Example - if rows 2 and 3 are hidden using the "Hide Row" macro, the following would happen;

Row 1 is visible, so it is numbered "1" in AW1.
Row 2 is not visible, so it either has no number or freezes at "1" in AW2.
Row 3 is not visible, so it also has no number or freezes at "1" in cell AW3.
Row 4 is visible, so it is numbered "2" in AW4.
And so on.

It doesn't really matter what is in the AW cell in hidden rows because I am not totalling rows. What I am doing is using it to define a print area. If a page has to be 70 rows long, another macro uses column AW to work out where to put page breaks (after row 70, 140, 210 and so on). If twenty rows were hidden on page 1, without the above solution, the printed page would only be 50 rows long. A solution to the above problem will always make sure only visible rows are counted when calculating where to put page breaks.

I am using Excel 2000.

View 7 Replies View Related

Counting Rows Based On Different Criteria

Oct 28, 2008

I've got two worksheets. One contains data from a query, the other worksheet should count rows in the queryresults based on two criteria. See example.

I tried doing it with sumproduct in the normal variant and the array-variant...

View 8 Replies View Related

Counting Data Entries In Rows

Apr 11, 2007

I run an online golf tour and I need a little help with the coding of my handicap excel sheet. (For any golfers out there this is a custom handicap system, not the R&A version).

First I'll explain what I have, then my problem.

I have from left to right the following, Name, Scores, Worst Score, 2nd Worst Score, Average, Hcp. (There are other columns but are not important here)

The Scores columns record each round played, so at the moment we only have 10 columns with data as its the start of the season. I currently find the "Worst Scores" from the 10 columns, as they are all relevant at the moment. My problem will arise when I get over 12 columns of data. From that point on I need to find the "HIGHEST 10" from the "LAST 12" entries.

Easy you might say, BUT the last 12 rounds played could be spread over 100+ columns and every row could be different.

Example, Player 1 could have scores in column A to AB and then in AD to AE. Where as Player 2 could have scores in every alternate column.

I'm assuming I'll have to set up some form of count to count the cells that have data in them until I get to 12. Then extract the ones I dont need.

My question is, How do I find the last 12 column cells used in any row AND extract the highest 2 from those 12?

View 9 Replies View Related

Write Formula After Counting Rows

May 16, 2009

I have got mentioned below result after running a macro and I want mentioned below formula to be put after counting rows, because each time as per my query when I run macro result is different in rows as you can see in below table the formula I put in column F in rows 19, 20, 21, and 22.

ABCDEFG5DateD.IDAmountNODiff2TimeZone62-May-091001 500 50 - 1:50P-172-May-091002 10,000 120 - 1:15P-182-May-091003 2,000 100 - 1:15P-192-May-091111 300 40 - 1:50P-2102-May-091112 100 20 - 1:50P-2112-May-091113 234 100 - 1:50P-2122-May-091114 124 80 - 1:50P-2132-May-091211 380 3 - 1:00P-3142-May-091212 908 50 - 1:50P-315 Average1:14 16 Total Pins10191 17 18 ZoneRequest Count 19 P-13 20 P-24 21 P-32 22 Total9
Spreadsheet FormulasCellFormulaF19=COUNTIF($G$6:$G$14,E19)F20=COUNTIF($G$6:$G$14,E20)F21=COUNTIF($G$6:$G$14,E21)F22=SUM(F19:F21)

Excel tables to the web >> Excel Jeanie HTML 4

View 9 Replies View Related

Counting Rows From A Fixed Cell

Feb 21, 2010

I want to count the number of rows from a fixed cell (eg. $A$2) to a "named cell" (eg. "Department Winn").

View 9 Replies View Related

Counting The Number Of Used Rows In Column

Oct 4, 2006

how can I count the number of not empty rows(and for example too many) using do.. until loop kind. I am searching on the net for about 24 hours but I couldn't find it.

View 5 Replies View Related

Omit Hidden Rows When Counting

Oct 26, 2007

In a database of names I use Filter- Advanced Filter - Unique records, to hide duplicated rows. Trouble is I don't know if there were any duplicated rows when it finishes. I would like to see the totals reflect this by not including them in the Countif function.

View 6 Replies View Related

Looping Through Rows Counting Cells With Numbers?

Oct 31, 2013

First, I have to say that I am very weak in VBA.

I have a section of code where I need to count the cells from J through BF in rows 42 through 76. The code snippet I'm working on is:

Code:
For r = 42 To 76 Step 1
if Application.WorksheetFunction.Count(Range("J" & r:"BP" & r)) = 0 Then
Err = Err + 1

[Code]....

The code checker highlights the ':' in the 'Range .... = 0' with the message "Expected: list separator or )".

View 2 Replies View Related

Counting Number Of Rows With Multiple Criteria

Dec 8, 2006

I have a sheet with "Yes", "No', and "N/A' in most of the Columns. (E - Q) and about 100 rows of data.

I only want to count the number of rows that have "No" in column E and Yes in all the others. If "no" occurs in any of the other columns in that row (D-Q) I dont want it to be part of the count.

View 9 Replies View Related

Counting Rows Based On 2 Columns (Distinct)

Mar 19, 2007

From a base table, I need to create a new table listing only the unique combination of 2 columns and their individual sum. Example:

Base Table:

ITEM-----Loc-----QTY
Pen------School----5
Pencil----Office-----9
Binder---Office-----9
Pen------Office-----6
Pen------School---15
Binder---School---12
Pencil----Office----10
Binder---School----6
Pen------Office----11

I need to have a table resulting to the following:

Item-----Loc------Qty
Pen------School----20
Pencil----Office-----19
Binder---Office------9
Pen------Office-----17
Binder---School----18

View 9 Replies View Related

Counting Rows/Columns In Selection Target

Sep 12, 2006

I have a data set with rows of data, with a header row along the top. I want to sort my rows of data by column when the cell above the appropriate column is pressed. I know this seems cumbersome - but it fits in with the sheet. The sheet is protected, and we only want the user to be able to sort in this fashion. My problem is, with my code, I get an error when you select a range of two of the header cells. The case selection on the target.column gets confused. How can I check to see if it's just one cell? Is there a property of a range that reflects how many rows or columns it contains? I tried the following (marked with the ' )just from picking out of the pop-up list of properties of the Target range in SelectionChange, but obviously it doesn't work. My original code is the un-'-ed code.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
' If Target.Rows = 1 And Target.Columns = 1 Then
If Target.Row = SortRow Then
Select Case Target.Column
Case PriorityColumn
SortData PriorityColumn
Case JobColumn
SortData JobColumn
Case NotesColumn
SortData NotesColumn
Case SupervisorColumn
SortData SupervisorColumn
Case ShutdownColumn
SortData ShutdownColumn............................

View 2 Replies View Related

Counting Number Of Used Rows/columns In A Sheet

Mar 3, 2007

In my Macro , i add a worksheet and depending on certain conditions i decide whether to populate it or not.

At a later point of time i am checking if the newly created worksheet is empty or not using the following check :

If ActiveWorkbook.Worksheets(ISheet).UsedRange.Rows.count <> 0 Then

Now what i have noticed is that even in cases where the "ISheet" is empty the above condition evaluates to true for the first attempt. I cannot understand why ?

let me know if the query is ambiguous and i will post the code snippet

View 3 Replies View Related

Counting Same Id In Rows And Sum Number Of Hours For Id In Pivot Table?

Jun 26, 2012

I have a column C which list Unique ID and this ID can be repeated several times in Column C. For each row the Unique ID has a value in Column D of how many sick hours are taken. I would like to create a pivot table which would provide a count of the Unique IDs and the total number of hours for the Sector in Column A.

Q1_Sick UnCertified 01042012_25062012(1).xls

View 10 Replies View Related

Macro Giving Wrong Result For Counting Rows

Mar 10, 2014

The below code is giving wrong error.

[Code] ........

sheet1 has the following data
sheet1 has the following data

empid name loc
1 aaaa ddd
2 bbbb ggg

4 cccc dddd

the 3rd row is empty in sheet1 but still it is showing number of rows as 3.I need macro it will not count if entire row is empty in that sheet.

View 14 Replies View Related

Counting Fully Filled Rows In Filtered Matrix?

Jan 22, 2012

I'm trying to calculate the number of rows in a matrix that have a complete row of data. I would noprmally do this using nested if formuals and a count function, but the columns of the matrix are filterable so the count won't work.

Is there a combination of functions that will adapt as I filter data?

View 5 Replies View Related

Counting Number Of Unique Values In Rows/columns

Mar 6, 2003

I have several columns in an excel sheet which contain values (eg. Names). The entered names can be unique or already exist in the column. I need to find out (using a function or macro) how many different names were entered. Duplicates shshould be ignored in the count.

View 9 Replies View Related

Counting Rows Based On Date And Status Column

Apr 2, 2007

I wish to count the number of entries in a workbook based on the entries in two columns. The columns are for example H1:H100 ( date) and L1:L100 (status). I want to the number of times the date in H1:H100 is over 30 days old, as well as L1:L100 = 'Started' for example.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved