Create / Edit And Save Workbook From List Of Data?
Dec 21, 2012
I have a workbook which contains a list of data on the first worksheet. I need for a macro to copy the name in each row,along with its data in that row and paste it into the corresponding locations on a template located on another worksheet. It would then save the file using the date (col. a) , then the words " Scorecard for" and then the name (col. b), then loop for each row until it reaches the end of the list.
I located this code here here.However I dont know how to modify it to fit my needs. I dont have 2 separate categories for two score cards in column b. It would all run off one scorecard and each row of data.
[Code] .....
View 1 Replies
ADVERTISEMENT
Nov 11, 2006
I have a workbook (see attach) That has 2 worksheets. (LOAD DATA AND SKIP) What I would like to do is have VBA that automatically filters for each of the names in column A, creates a new workbook naming the workbook as the filtered name (ex D Fowler) and current date and then copy in all info based off filtered data from columns A thru Y Then save and close for each of the names in column A.
View 6 Replies
View Related
Jun 15, 2014
I am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
View 4 Replies
View Related
May 11, 2009
I have a spreadsheet called contacts which is as it says, I have another sheet called project management, I want to have a drop down list which refers back to the contacts spreadsheet, it this possible as they are two different files?
View 4 Replies
View Related
Apr 27, 2013
I want to write a piece of code where each day i run this code
I want add a workbook
Copy range ("A1:C5") to this new workbook
Save new workbook in a particular folder with the name customer data and todays date and save as CSV file
I run this this code every day so it should only add todays date at the end for filename
If for some reason I run this code again in the same day..
I want to have a msgbox stTing you have already ran this code today and exit sub
View 4 Replies
View Related
Nov 1, 2009
Im trying to create a macro that when i click the button a new workbook is created and saved as the value from C5 cell.
View 9 Replies
View Related
Feb 12, 2010
I have a workbook with roughly 28 tabs(sheets) and i need to be able to run a macro that will create a new sheet for each tab and name it based on the tab name.
View 9 Replies
View Related
Aug 21, 2008
I have code to create a new workbook, and when I try to rename it I get "Compile error: Can't assign to read-only property."
Dim objXlApp As Object
Dim wkb As Workbook
Dim wks As Worksheet
Set objXlApp = CreateObject("Excel.Application")
' Create a workbook
Set wkb = objXlApp.Workbooks.Add
' Delete all worksheets bar the first one.
For Each wks In wkb.Worksheets
If Not wks.Index = 1 Then
wks.Delete
End If
Next wks
'Create some worksheets and names
With wkb
.Worksheets(1).Name = "myWorksheet1"
.Worksheets.Add.Name = "myWorksheet2"
.Worksheets.Add.Name = "myWorksheet3"
.Worksheets.Add.Name = "myWorksheet4"
End With...................................
View 5 Replies
View Related
Sep 8, 2006
Read “My Documents” Path And Use Result
Problem:
Note:
Typical user OS will be Windows XP Pro / Win 2K
Excel version : 97 / 2002 / 2003
1. Corporate network security settings will only allow directory/subdirectory creation in the “My Documents” section of customers individual computers.
2. Per customer request, VBA application needs to save extracted files for future use.
3. I can specify an initial “My Documents” subdirectory be made and the VBA application file be loaded/copied into that location – i.e. – “My DocumentsCat”.
4. When VBA application is opened from that specified directory, (first time), the application needs to make an additional subdirectory tree to save future files. I can read the opened from location via VBA with the following:
Dim filepath As String
filepath = ThisWorkbook.Path
As an example – this code would produce a string definition of “filepath” – such as the following:............................
View 5 Replies
View Related
Sep 28, 2012
I have two workbooks open. I need to "Save As" and close workbook 2 with a file name from a cell in Workbook 1. The macro is running from workbook 1.
I'm guessing a change in the last line. I don't know what Dim means either.
Dim FName As String
Dim FPath As String
FPath = "G:"
FName = Sheets("sheet 1").Range("A1").Text
ThisWorkbook.SaveAs Filename:=FPath & "" & FName
View 1 Replies
View Related
Feb 7, 2008
I have an edit hyperlink in my spreadsheet. In here, once I click the edit button, a form opens up and when I hit the save button it need to modify the records in that row alone. right now it is creating a new record. This is the code I use to create a new record in excel.. I need to modify this code to edit an existing record...
Private Sub frmSubmit_Click()
On Error Resume Next
Dim varNbRows As Long
Application.ScreenUpdating = False
' Determining the number of records
Sheets("Opportunity").Select
Range("B14").Select
varNbRows = Sheets("Opportunity").Range("B14"). CurrentRegion.Rows.Count
' Going to the first empty row
If varNbRows = 1 Then ..............
View 4 Replies
View Related
Mar 1, 2013
I have a spreadsheet that data gets exported to from a software program. There is information such as customer name, part number, inquiry number, etc that I'd like to use to develop a log of all my estimates I create for parts. I'd like excel to take the cells I select and insert them into certain cells in the other workbook and automatically save that workbook. This will create a log of all my estimates where I can then link the full estimate to the log. The information will have to go in the next available row. Is there any way I can accomplish this without having to open the other workbook and save the work book each time?
View 1 Replies
View Related
Mar 11, 2014
I am exporting a multiline listbox entry (with 14 columns, I'll expand that later) by DoubleClick from one UserForm to another.
View 1 Replies
View Related
May 22, 2006
i've got the code below, and if you notice the directory and file line, I want a loop that'll do what the macro below does, but also for files j1k2-j1k200. I'm hoping there's a macro that'll be able to do this, as I don't want to have to copy, paste and edit the same macro below 200 times!
Application. ScreenUpdating = False ' turn off the screen updating
Set wb = Workbooks.Open("C:Uni StuffStocks_J20j1ka.xls", False, False)
Sheets("Sheet1").Select
Range("B6:S6").Select
Selection.Replace What:="]w1", Replacement:="]w2", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
wb.Close True ' close the source workbook saving any changes
Set wb = Nothing ' free memory
Application.ScreenUpdating = True ' turn on the screen updating
End Sub
View 5 Replies
View Related
Feb 2, 2009
I am after some code to create a new worksheet called 'xxxx' in my workbook, and then list all the sheets within the workbook (excluding the newly created 'xxxx' sheet.)
View 4 Replies
View Related
Apr 15, 2012
I need to create a macro that can produce a new workbook with the list of the most recent users of my company, so that we can print their membership cards.
From my company's admin I can export the complete list of users with their name, serial number and address. Every time we export this list, the file is saved as "userdata-dd-mm-yyyy.xls", and "dd-mm-yyyy" as today
However, I would like to create a macro that would
1) open the most recent "userdata-dd-mm-yyyy.xls" workbook in the folder,
2) compare the user numbers in this file with the most recent "card_order-dd-mm-yyyy.xls" and
3) produce a new "card_order-dd-mm-yyyy.xls" workbook with the list of all new users since the last "card_order-dd-mm-yyyy.xls" ("dd-mm-yyyy" as today), based on the highest number for user number (this is a continuous list)
Note, the "userdata-dd-mm-yyyy.xls" workbook has name, serial number, address, expiration date and user number as columns.... but the extracted info to "card_order-dd-mm-yyyy.xls" is just of the name, serial number and expiration date.
What is the easiest way of doing so and what code should I use for the macro?
View 1 Replies
View Related
Jul 16, 2012
I have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL
ATL
ATL
ATL
CEN
CEN
JCK
JCK
etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
View 5 Replies
View Related
Apr 21, 2008
I have an xl doc in which one of the sheet's column A changes value every 1 hour...
What I would like to know is.. if there is a method in which i can copy these values from column A to a text file every hour...
The range of cells containing values in Column A also varies every hour.
Also, the old values in the text file needs to get deleted before the new values are updated every hour.
View 14 Replies
View Related
Dec 3, 2006
what code can be used to be place in a Command Button on a worksheet that will use the value in a cell, change it to the directory where it have to be saved and save it to the value of another cell. Example:
On a worksheet called "Customer", at cel A1 will be the customer's name and at cell A2 will be the asset number. Now let's say a directory does not yet exist on the root for this customer, a new directory must be created in the root directory by using the name in A1, and the workbook must then be copied and saved under the value of A2.
View 6 Replies
View Related
Mar 17, 2007
I Attached a sheet for what i'm asking about ,, i sent it before but the sheet showing it more clearly
View 10 Replies
View Related
Jan 4, 2013
I've attached a spreadsheet showing the effect I'm trying to achieve. A list (which changes weekly) contains employee details and length of service. Based on the length of service I need to build a new list grouping the employees based on the service length.
list-test.xlsx‎
View 6 Replies
View Related
Dec 19, 2008
i want to create folder depending on cell value a1 select data from a1 to h20 save this as "b1 value.xls" my saving directory is c:
eports"a1value" ....
View 9 Replies
View Related
Apr 27, 2014
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
category(workbookname)Items(sheets)
Vegetables carrot
vegetables brinjal
meat chicken
meat Fish
meat Mutton
grains Wheat
grains Rice
View 4 Replies
View Related
Apr 19, 2008
I have downloaded the sample file at the bottom of the 'Contextures' webpage that explaines how to create a simple userform...
[url]
at the very bottom there is a 'Download the sample file' link
This simple form alows the user to input 4 bits of data, PartID, Location,Date and Qty. This data is saved in another part of the worksheet called 'Partsdata'
What I want is somehow for the user to be able to seach for a PartID from the list in the Partsdata worksheet. When this PartId is found, display the userform in a way that the data relating to that PartID can be edited and then re-saved when the user clicks on the 'add this part' button.
For example....
Msg Box or user form dispalyed stating...."Enter PartID to edit"
a search of the PartID column (columnA) in PartsData worksheet is carried out and when the matching PartID is found the corresponding information is displayed in a user form that can be edited by the user.
Once the user has made any changes to the data shown, the user clicks on the 'Add this part' button and the new data is re-saved using the same partid reference.
View 9 Replies
View Related
Nov 9, 2007
I'm trying to create a macro which will edit the content of a cell and update. I'm just using the "Record New Macro" option in tools.
It doesn't seem to perform the F2 edit function within the macro.
I'm sure this has been discussed previously, but I can't get the search function to work for me.
View 9 Replies
View Related
Dec 2, 2009
if there was a way to disable mcros but I think now I should have pursued the option of saving data to new workbook without transfering the existing formulas or macros. I really think I should attach the sheet I have thus far so I can convey what I am trying to accomplish. Anyone interested, please let me know and I will forward the sheet. I am unsure how to do this any other way. I found some code that would claim to do this but I have so many things going on already in this sheet I can't figure out how to incorporate the new code to work properly. Here is the original thread for reference [url]
View 9 Replies
View Related
May 22, 2008
I have a form which creates a budget based on user input. I want to save that user input in a separate workbook. My goal is to reduce the file size. I have several modules which perform evaluations/ calculations, and then format the output in a worksheet, but the size is pretty large 450KB.
I was thinking that I could set the control source, to different cells on the worksheet, and then just copy the worksheet to a new workbook, and save the data by itself. Then if I wanted to change the data for a given budget, I would copy the sheet back into the workbook that contains the modules, and load the form again. Is this a good solution? Is there a better way? Please let me know if I can provide more information.
View 9 Replies
View Related
May 2, 2014
I currently have a macro to import user selected .Dat files into a new workbook, each on its own worksheet. My problem comes in trying to save this new workbook in the same folder as the imported .Dat files. I was thinking there should be a way to gather the file path from the imported files and use that in the Save As command.
[Code]......
View 2 Replies
View Related
May 23, 2013
I'm trying to use vba to create an offline backup file for a sheet that is linked to an access database. the code I have is simple and worked for a file that is not linked to any database.
Code:
Sheets("Data").Select
Sheets("Data").Copy
Application.DisplayAlerts = False
ActiveWorkbook.SaveAs Filename:=myfilename
Application.DisplayAlerts = True
Now that I insert it into the actual file, which is linked to the database I get an error. I also tried to move the display alert up, before the select instructions, but also this does not work. this is not what I wanted since I want this file not to possibly connect to any database.
View 9 Replies
View Related
Apr 13, 2008
I have a spreadsheet that has 3 columns, date, id and amount for the whole year.
what I need to do is have a macro on another sheet or workbook that has an entry for month. when i enter the month, i need to get all the data for that particular month and then save it with the month name. i am not very sure how i can do this. pivot table does not work as i need to save a file each month.
View 9 Replies
View Related